Resume - Heavy Eqiupment Operator,Construction,

Misco Jobs

Resume #77259

CONTACT INFORMATION:
View contact information...

I am compiling this resume in order to enable my perspective employer to fully understand the range and scope of my skills and experience. As well as to show my use of and skills with a variety of complex, complicated and possibly dangerous tools safely, Also to exhibit my ability to supervise as many as (7) skilled craftsman while performing my own tasks.

RELATED EXPERIENCES:
From 05/08 to 11/08:
I worked for A and B Marketing: 6500 Bowden Rd. Jacksonville FL. 32254 Ph.904-268-0033. I worked as a Lead Generator for this Rainsoft Distributor under Shirley Murphy. I also for a short few weeks sold Rainsoft water conditioning systems. I found that I was not suited for this line of work.

From: 04/06 to Present:

As a self-employed remodeler I provided my clients with most aspects of the field:
Plaster/ Sheetrock: Install, repair and as well as prime and paint.
Flooring: Repair and restore Hardwood floors; Prepare surfaces and install ceramic, porcelain and stone tile.
Plumbing: Replace copper and galvanized pipe with PVC and CPVC. Change out, repair, and replace and install kitchen and bath fixtures, sinks, toilets, bathtubs, and showers.
Basic Electrical: Run wire from a junction box down the wall to a switch, then back up to a new ceiling fixture. Replace switches, outlets and anchored and installed ceiling fans.
Transform a (2) car garage into a studio office with a shower bathroom, including pouring a concrete floor with a crew, supervising Electricians and Plumbers while managing a crew of (3). At one point I was overseeing the removal of the electrical panel from the house to an outside wall, while 220 service was being run under ground, to accommodate a tankless water heater, and a crew of plumbers were repairing and connecting the sewage pipes from the house and studio to city service. And getting the sheetrock mudded, the carriage doors installed on the face of the garage, and the Lord knows what else!

From: 03/03 to04/06
Under Nick Humphress of Neighborhood Nick @ 2759 Green St. Jacksonville Fl. Ph# 374-9505 or 509-6121 (cell) I performed all aspects of home repair and remodeling, including trim carpentry I also acted as On-site manager for up to (3) craftsman.

OTHER EXPERIENCES;

From 05/00 to 03/03:
Florida Rock Ind. Inc. 700 Palmetto Dr. Jacksonville. Fl.32236
Plant Manager: George Newman ph# 545-2643 (home)
I operated a concrete mixer truck at all hours of the day and night on residential and commercial pours.

From 01/00 to 05/00:
Various jobs; Burger King (cook) and Amelia Island Plantation (housekeeper)

From 08/99 to 01/00:
Personnel Department Inc. 1234 Williston Rd. S. Burlington Vt. Ph# 802-865-4243
Temporary labor: stocking shelves for Office Depot and Bon Ton.

From 06/98 to08/99:
Professional Nursing Services: Pace Office Building, Suite 100B. S. Winooski Ave. Winooski Vt. Ph#802-655-7111
Title: Traumatic Brain Injury Certified, Licensed Nurses Assistant.
Supervisor: Fran Greenhalgh RN. AS. TBI.
I assisted TBI. Clients in redeveloping life skills with the goal of enabling them to return to self sufficiency.

From 01/91 to 06/98:
Green Mountain Nursing Home, 1102 Ethan Allen Ave. Colchester Vt. 05446 Ph# 802-655-1025
Title: Licensed Nurses Assistant
Supervisor: Betty Rhoades RN. DNS.
All areas of Long term care on (3) shifts.

REFERENCES:
Professional: Roger A. Moss, Pacific Bridge Realty. 2755 Riverwood Ln. Jacksonville Fl. 32207 Ph#904-887-4166. Olin Cannon, Cannon Plumbing Inc. 217 Trout River Dr. Jacksonville Fl. Ph#904-343-4344.
E. Shane Whitemore, Property Manager CSX Transportation. Ph# 904-556-4426.

Personal: Tina Anderson, (Mentor) Ph# 904-389-5125. Chris and Lori Terpak-Smith (Friends) Ph# 904-389-4669.

Equipment Operated:
Farm Tractors: Massey Furgeson, International Harvester, Allis Chalmers, Belarus.
Other Farm Equipment: Grain Mixers, Hay Mowers, Rakers, Tedders, Balers, Harvest Wagons and Manure Spreader, also Silo Feeders and Fillers, as well as Milking Machinery.
Other Equipment: Front-/end Loaders,Scrapers/Pans, Vibratory compactors, Forklift, and Bob Cats.

Tools Used:
Proficiently: Chain, Circular, Jig, Reciprocating, Miter, and Wet/Tile Saws, Drills, Grinders, Sanders, including Drum and Orbital floor Sanders, Buffers, Trim Nailers, Ladders, and Scaffolding.
Familiar With: Table saws, Routers, Jackhammers, Floor Jacks and Paint Sprayers.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 2563)

Go to Search Parameters...

Brief Description

Good analytical and communication skills. Can communicate fluently in both English and Tamil. Willing to learn and adapt to new challenges. Self-motivated, dynamic, quick learner and team player.

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Responding to all types of emergencies such as structural, aircraft and shipboard fires, activation of installed fire protection and alarm system, hazardous material operation, and rescue and retrieval operations during times of calamities.

Licensing, installing and configuring Windows Server 2003. Licensing, installing and configuring Active Directory. • Managing physical and logical disc. Configuring terminal services. Managing, monitoring and securing Windows Server 2003 resources. Managing user, group and computer accounts i

A highly skilled and very experienced Supply Chain Professional with over 20 year's expertise in Logistics, Procurement and Materials Control mainly overseas.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

To be part of a strong team of intellectuals saddled with challenging tasks, targets and responsibilities requiring a high degree of dedication in a conducive and friendly environment that upholds the tenet of customer satisfaction without jeopardizing profit and standards.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

Heavy Eqiupment Operator,Construction,

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

I am an undergraduate at the College of William and Mary majoring in business and geology. I have worked in aggregate quaries durring summers in a number of different jobs. I am certified as a QC lab tech by VDOT, I can operate mobile equipment, repair plant equipment, and geotechnic wor

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

5 years experience in Secretary work, Administration support and Branch manager assistant - team support to senior and management level in a multinational company

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

Service and maintenance of various heavy equipment

HSE ENGINEER AND SUPERVISOR

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out