Resume - Fifteen years experience in the oil and gas industry. Five years overseas work e...

Misco Jobs

Resume #77987

CONTACT INFORMATION:
View contact information...

Work Experience
Senior Mechanical Engineer AMEC Berca Indonesia, Jakarta, Indonesia 2007 to present
AMEC Berca Indonesia is a joint venture between the UK based international engineering company AMEC, and Indonesia's CCM group. The project I am currently involved with is engineering support for the construction of two offshore drilling platforms deployed off the eastern coast of Russia. The client is Sakhalin Energy and Investment Company (SEIC) a consortium involving Royal Dutch Shell and Russia's Gazprom.
* Troubleshooting and re-design of diesel fuel system for power turbines including pumps, heater and filtration system.
* Analysis of vibration problem with large API 610 firewater pumps.
* Installation of API 674 high pressure positive displacement pumps.
* Troubleshooting of a glycol heating system used for waste heat recovery and space heating.
* Gained familiarity with HVAC system design for offshore platforms.
* Use of HYSYS for hydraulic calculations and basic process simulation.
* Experience with various other equipment, including turbine power generators, diesel engine power generators, diaphragm pumps, pipe penetration fire seals, hoists, winches, padeyes, Stabmaster.

Mechanical Design Engineer Waha Oil Company, Tripoli, Libya 2003 to 2007
Waha Oil Company is jointly owned and managed by Conoco-Phillips, Amerada Hess, Marathon Petroleum and the National Oil Company of Libya. This position primarily involved design and management of oilfield facility upgrade projects.
* Installation of API 610 vertical and horizontal centrifugal pumps, rotary displacement meters, meter prover.
* Replacement of fuel gas supply systems for power turbines at two sites. Project involved the replacement of fired heaters, filter/separators, knock-out drums and interconnecting piping and control valves.
* Installation of fire detection and extinguishing system for crude oil storage tanks.
* Installation of fiberglass produced water piping system.
* Design duties included performing basic process modeling such as hydraulic calculations, working with drafting co-workers in the preparation of process schematics and arrangement drawings, reviewing vendor design drawings to ensure compliance with design standards.
* Project management duties included budget preparation, tracking project labor and material costs, coordinating with construction personnel, overseeing commissioning of equipment.
* Gained familiarity with API 610 for centrifugal pumps and API 682 for mechanical seals.
* Gained experience using HYSYS for process modeling.
* Provided mechanical engineering support to civil engineering projects such as evaluating and selecting ventilation and air conditioning equipment for installation in new buildings.

Mech. Design/Appl. Engineer Weatherford Global Compression, Calgary, Canada 1994 to 2001
Weatherford Global Compression (now Exterran) is a packager of reciprocating natural gas compressors, approximately 100hp to 6000hp in size. I had two positions at this company first in the applications department, preparing quotations for compressor projects, then in the engineering department in a design and technical support role with some project management duties.

Mechanical Design Engineering Position:
* Performed design and analysis of natural gas process and utility fluid systems for natural gas compressors.
* Selected components for process gas and utility fluid systems, such as manual valves, control valves, pumps, heat exchangers, transmitters, RTD's, thermocouples, switches and gauges.
* Designed structural and rotating systems for natural gas compressors.
* Designed pressure vessels and pressure piping to ASME codes.
* Researched rectangular flange design for pressure vessels and wrote a spreadsheet to perform the design calculations, saving the continued expense of hiring consulting firms to perform the calculations.
* Developed a procedure to design nozzles for pressure vessels, which standardized and improved the efficiency of the designs.
* Provided design concepts and calculations for development of standard intake and exhaust systems.
* Performed troubleshooting of operational problems with existing equipment.

Applications Engineer Position:
* Sized and selected major equipment to be offered in quotations on compression projects.
* Reviewed and commented on customer specifications (sometimes quite lengthy).
* Prepared design specifications for sub-equipment and solicited quotations from suppliers.

Engineer In Training Pillar Oilfield Projects Ltd., Calgary, Canada 1993
Worked at two oilfield construction sites in northern Alberta.
* Gained knowledge of field fabrication practices of piping systems, primarily welding.
* Observed types and usage of heavy equipment used in field construction projects.
* Gained knowledge of the types and usage of handheld tools.

Education
B.Sc. Mechanical Engineering University of Calgary, Calgary, Canada Graduated in 1993
* Overall GPA of 3.29 (4.00). Dean's List. Approximate class standing was fourth out of 70 students.
* Awarded Pearson Memorial Bursary and Trans-Alta Bursary for outstanding academic achievement.
* Completed two graduate level natural gas processing courses that included instruction on using HYSYS process simulation software.
* Completed an undergraduate course on Finite Element Analysis in the winter of 2003. This course included two projects using ANSYS version 6.

Professional Registrations and Memberships
* Registered with the Alberta Professional Engineers Geologists and Geophysicists Association (APEGGA).
* Member of the American Society of Mechanical Engineers (ASME). On the Board of Directors of the Southern Alberta Section of the ASME in 2002-03.

Career Interests, Hobbies, Miscellaneous
* Citizenship in three countries: Canada, USA and Ireland.
* Other areas of interest within the field of mechanical engineering include alternative energy systems, design for energy efficiency, fuel cells and hydrogen energy, control systems, mechatronics.
* Member of the board of directors of the condo building where I reside.
* Mechanical aptitude. Examples include hands-on projects requiring the use of basic hand tools such as performing auto repairs, the most complex being a transmission re-build.
* I very much enjoy traveling to and working overseas. The countries I have traveled to so far, starting with the most recent, are: Japan, China, Singapore, Indonesia, France, Spain, Russia, Egypt, Switzerland, Czech Republic, UK, Austria, Italy, Germany, Libya, Malta, Guatemala, Mexico, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 2564)

Go to Search Parameters...

Brief Description

Application post for welder

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

I have a 6 years diesel mechanic in kuwait and at present i am working in afghanistan as a Sr Wheel vehicle mechanic.

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

To be a part of a progressive organization that gives scope to enhance my knowledge, skills and confidence to achieve my goals with the combination of honesty, sincerity and hard work

Bachelor of Biotechnology Industry (2nd class upper-3.44)and have skill in molecular work(PCR,RT-PCR,Squencing,Bioinformatics software&tools).

An Environmental Engineer with Water Resources/Geological Engineering background. He also has four years of experience in a Gold Mine as a Geologist.

Civil Engineer, Civil maritime engineer

Computer ?Automation & Controls Engineer

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.

Training, education and experience in health, safety and the environment.

I am a talented and hard-working individual, committed to the environment, seeking to gain experience in an environmental field.

Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

4 Years experience in networking field.Looking for a networking job

Auto Electrician & Aircon Technician for Heavy Bus & other vehicles

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Skilled in Environmental Impact Assessment

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

Outstanding Engineer

Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling

Translator

Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.

To obtain a civil/environmental engineering position with the opportunity for promotion to project management

Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE

BSc Degree in Environmental Engineering, excellent leadership and communicative skills, excellent monitoring, auditing, evaluation and reporting skills, ability to operate as a member of a multi-disciplinary and multi-cultural team, NEBOSH and ISO 14001 Lead Auditor Qualifications.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.

Project Manager / Engineer, Private & Public Sector Experienced

Safety Supervisor

Interpersonal abilities, Communication skills, 25 years of supervisory experience, Organizational strengths, Analytical/problem solving skills, Administrative, coordination, and management skills, Strong initiative

Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with

Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.

Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.

I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background

Consultant Managment to give a support for selling the product.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out