Resume - Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acce...

Misco Jobs

Resume #78837

CONTACT INFORMATION:
View contact information...

Career Objective
To become a part of a growing and respectable company that has stability and advancement opportunities where I can expand my knowledge and skill sets.
Education
Associates of Applied Science GPA=3.85 out of 4.0 graduated from I.T.T. Technical Institute
Major in Electrical Engineering
CCNA Networking Associate Certification

Experience
2007 – current Texas Instruments Stafford, Texas
Repair and Maintenance Technician Prober and Tester support

* Isolate, troubleshoot and repair multiple tester platforms, which include Teradyne, Polaris, LTX Fusion, and various other customer test platforms.
* Run diagnostics and electrical fault isolation
* Board replacement
* Power Supply adjustment and replacements
* Support the test floor and maintain tool utilization at 98%.
* Interface with customers and engineers to provide increased quality and dependability on any all tester platforms.
* Maintain and order spare parts if needed.
* Troubleshoot PCB's to the component level and repair as needed to maintain tester utilization and reduce downtime.
* Access and usage of Unix and Linux operating systems.
* Extensive ISO 9000 training

Experience
2003 – 2007 Texas Instruments Stafford, Texas
Product Quality Analyst AEC Automotive Division

* Analyze Micro controllers. Through electrical fault isolation techniques.
* Support customer returns and improve quality through defect identification, defect reduction, defect electrical isolation, test case improvements and implementation. Drive customer returns to closure and identify root cause.
* Operation of Automated Testing Equipment: Platforms: Teradyne, Polaris, Fusion, and various other customer test platforms.
* Provide corrective action to reduce defects to improve quality and reliability.
* Provide formal status and final reports in the 8D format.
* Extensive ISO 9000 training

Experience
2000 – 2003 Texas Instruments Richardson, Texas

Plasma Test Laser Technician
* Operate Laser, VCT, VLCT and LTX Fusion series testers
* Operate under engineering conditions "Load specialty Job files etc"
* Interface with Engineering on Dispositions and minor issues with product flow
* Monitor and troubleshoot tester setups to maximize yield and minimize probe / re-probe cycle time and scrap
* Perform data analysis in performing lot disposition after processing
* Work closely with PDE and assist as I can in bin summary analysis, material scrap/dispositions and program anomalies
Experience
1999 – 2000 Texas Instruments Richardson, Texas
Wafer Fabrication Manufacture Specialist, (Photolytic)
* Work in a clean room environment
* Wafer handling protocols
* Operate photolithical equipment in production of silicon wafers utilizing precision optical equipment (electron microscopes, steppers using unix xterm interfaces and alignment machines
* Follow written and verbal procedures
* Interact with customers and suppliers within a team environment
* Troubleshoot exposure problems and make adjustments accordingly
* Identify hold lot issues; implement corrective action and direct rework as necessary

1987-1999 Texas Instruments/Raytheon McKinney, Texas

Electronic Engineer Technician AT/ET (Acceptance Test,
Environmental Test) Job grade 74
* Perform Qualification testing on deliverable/prototype products
* Provide formal documentation on testing results and events performed
* Trouble shoot malfunctioning systems and work closely with Engineering to correct issues, utilizing voltmeters, oscilloscopes and analytical software relevant to the particular system under test
* Interface with customers/suppliers within the organization
* Control work flow to meet customer demands and on time delivery
* Work with and write formal operating procedures and written operating instructions as needed in operation of systems to meet Military standards and customers needs
* Maintain and trouble shoot equipment used in the lab (Test sets, Chamber controllers, vibration controllers, circle chart recorders, meters, PC's, operating systems such as Windows NT and Unix/Solaris.
* Gather field data on systems, instrument them with accelerometers, operate them under field conditions while recording on a DAT machine, take the data and import it into a signal generator, and alter the signal as needed per customer requirements (increase or decrease DB/RMS levels) to be input through Electro Dynamic Shakers controlled by Ultra Spark workstations running on Solaris Unix and Spectral Dynamics Shaker controller software
* At times provide LAN connectivity so that the customer can interact with their units under test from home or from their workstations. Some test are very long durations, sometimes as long as 1 year (Reliability Growth and accelerated life Tests)
* Perform sound tests within a soundproof environment, recording DB levels under operational and non-operational conditions to meet customer requirements
* Provide testing recommendations to customers to meet Military standards

Special Skills
* Extensive electrical test data analysis. Able to interpret electrical functional data for electrical fault isolation.
* Power Supply functionality, adjustment, and replacement
* Good understanding of electrical circuitry and their functionality.
* Good understanding of semiconductors, their properties and fabrication methods and techniques.
* Certification of completion of Advanced Vibration Equipment Operation Administered by Environmental Test Laboratory of Texas Instruments
* Use testing and monitoring equipment as in voltmeters and oscilloscopes, signal generators (Spectral Dynamics software)
* Good written and communication skills
* Work well in a teaming environment
* Work with little or no supervision
* Control workflow to meet customer requirements
* Read drawings and schematics, follow and write formal procedures
* TQC certification (Total Quality Control)
* Basic Unix operating system usage
* Signal generation and wave form manipulation using Software made by Spectral Dynamics
* Troubleshooting skills, some component level and card to system level
* Operation of Teradyne, VCT, VLCT, LTX Fusion Probe testers
* SMS functionality
* Microsoft Word, Excel, some Access
* Operating Systems—Winnt 4.0 and up, WinME, Win2000, Win2000 server, Solaris, Linux, Unix

Honors
* Member of the Honor Society at I.T.T. Technical Institute
* Highest Honors awards

References
* Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2563)

Go to Search Parameters...

Brief Description

Entry level electrical engineer resume

Strong knowledge in TCP/IP networks, windows 2000/XP, windows 2003 server, Active Directory, PC maintenance. Eletronic devices and debug. System monitoring and support. Requirement analysis and functional tests. Mobile network simulations using Agilent 8960 test set.

I am Electronics and Communication graduate and presently working in Saudi Arabia

A land and property manager with expertise in contaminated property and community relations. Specializing in aligning community and corporate interests into a workable plan, improving communications and building stakeholder trust.

Mining engineer with strong engineering base, team worker, comunicative, capable for individual work and research. Ready to work on a chalenging jobs, high level of computer litteracy. BSc diploma for mining engineer (5 year studies), currently on post graduate studies of mining.

Experienced Design Engineer

Eelectrical Engneer/Designer

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

Wire and Cable experience Warehouse Manufacturing experience

Background includes the military, law enforcement, and international security management experience. Education includes a B.S. in Justice Studies, Master Safety Administrator (MSA) certification, and Emergency Medical Technician (EMT) certification.

I have a diverse environmental experience derived from both industrial and international development sectors, from the corporate level to the field level -- over a wide range of environmental aspects and capacities. Currently eager to return to engineering roots.

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation

recent chemical engineering graduate with 2 years of work experiences including R&D and industrial experiences. Experiences in pilot plant operations, bench tests, process engineer

Channel sales, Institutional sales, Oem sales, Business development, International sales

I am a self-motivated, determined and organized individual who strives to perform any task to the best of my abilities. I have a strong background in 2D and 3D drafting, design and modelling and am capable of producing accurate and high quality drawings in a fast paced environment.

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

M. TECH. in chemical engineering with specilization in industrial safety and hazards mgt.

Utilize management and organization skills acquired through previous positions in

Safety Officer QualifiedUK HSE & HSE Trainer

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Student in Physical-Chemical and Electrochemical Processes Engineering.

To be associated with a professional organization, which will provide an opportunity for the growth of my career and grant scope, to utilize my knowledge and skills towards the success and growth of the organization.

Entry level geological engineer seeking full time employment in a civil or mineral engineering firm. I have 9 months experience in engineering soil testing and hydrogeology. I have training in using a troxler nuclear guage and some monitor well drilling experience.

Contracts Manager

Entry level geologist, mining, environmental science

geology, geotechnical, geological engineering, geology and environment, hydrogeology, prospection and groundwater abstraction, geohazards, geological mapping, interpretation of seismic reflection profiles, stratigrafic, sedimentology. Very experience in topography, cartography, mapping and autocad

All kinds of Fault finding in the Tower crane & Hoist from electrical department

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

Extensive Autodesk AutoCAD and Autodesk Inventor Professional Experience

RESUME

Project Management / Production Control

B.E.(ECE) in College of Engineering, Guindy, Anna University, Chennai having experiences in working in Integrated Systems Laboratory (Anna Univ) on various projects and interested in taking up a career in Analog VLSI Design

im a hard worker and want to learn and server the company. im willing to relocate and travel anywhere in the world

Technical

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

I have been working for the same company for 10 years in different divisions. Right now I am a crane driver/operator. Who is always up for a challenge.

Company Oriented,Safety Is #1 And Very Hard Working

I have done my MBA and Diploma in information technology. I have worked in diffrent feilds

Zinc and Lead Smelter Plants Metallurgical Engineer with experince in operations, consultancy & Project Execution & Management

Seeking an opportunity in the oil and gas industry to develop and utilize expertise in electrical/electronics, control, instrumentation and/or automation as a new entry or trainee engineer.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

I graduated in July 2006 with a BE Honours Degree in Manufacturing Engineering. I have over two years’ experience as a Process/Project engineer in a multinational company. I have completed courses on DOE & PDA and Project Management. Proficiency with Microsoft Word, Excel, PowerPoint, AutoCAD,etc

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out