Resume - I have been an HSE Supervisor for the past twenty (20) years for local and overs...

Misco Jobs

Resume #80926

CONTACT INFORMATION:
View contact information...

Nationality: Filipino
Languages: English, Tagalog

Has acquired ten (10) years overseas experienced in oil & gas & polyethylene projects with the position of HSE Supervisor and ten (10) years local experienced gained from reputable companies.

Education:

Bachelor of Science in Marketing
Polytechnic University of the Philippines
Manila, Philippines
01 April 1978

Master in Business Administration
Polytechnic University of the Philippines
Manila, Philippines
1985 – 1987

Professional Affiliations:
Philippine Association of Safety Engineers (Doha, Qatar Chapter)
PHASE Ref. No. 2007-532

Philippine Society of Safety Engineers (Middle East Chapter)
Safety Organization of the Philippines (SOPI)

Certified ARAMCO as Contractor Safety Officer
(Certificate No. 7702181)

Certified ARAMCO as Permit Receiver
(Certificate No. 981758133)

Commendations:

Certificate of Appreciation
Snamprogetti – Saudi Aramco
NGL Recovery Project
Contract Nr. 6000012778
Hawiyah, Kingdom of Saudi Arabia

Certificate of Recognition
"Achieving the Four Million Five hundred Thousand Man-Hours
Without a lost-time incident"
Snamprogetti - Saudi Aramco
28 February 2007

Certificate of Appreciation
"Achievement of Three Million Man-Hours at Site without Lost
Time Injury"
Snamprogetti – Saudi Aramco
Year 2006

Certificate of Recognition
"Support and Commitment to Safety, Health and Environmental
Program of QATIF Facilities for Berri Gas Plant Project"
ARAMCO – TECHNIP
03 July 2004 – Jubail, Kingdom of Saudi Arabia

Certificate of Achievement
"Achieving the Twenty-One Million Two Hundred Two Thousand Six Hundred Eighty One (21,202,681) Total Accumulative Man-Hours Worked Accomplishment"
Saudi –Toyo Engineering Company (SATEC)
Petrokemya Polyethylene Project
15 December 2003 – Jubail, Kingdom of Saudi Arabia

Certificate of Appreciation
"Achieving the Twelve Million Safe Man-hours worked without Lost-Time Incident"
Saudi-Toyo Engineering Company (SATEC)
Petrokemya Polyethylene Project
23 September 2003 – Jubail, Kingdom of Saudi Arabia

Certificate of Commendation
"Safety Officer of the Month"
Saudi-Toyo Engineering Company (SATEC)
Petrokemya Polyethylene Project
03 August 2002 – Jubail, Kingdom of Saudi Arabia

Seminars:

Hazard Operability Study (HAZOP) -TUV NORD
20 October 2008

Occupational Health & Safety Management Systems
Auditor/Lead Auditor Training Course – TUV NORD
(Based on OHSAS 18001)
22 – 26 April 2008

Crane Safe Operations
28 August 2006

Construction Health, Safety and Environment
Introductory Level, Shaoiba Power Plant
31 March 2005

Industrial Fire Brigade Training Course
San Miguel Corporation
Binondo, Manila
Philippines
15 – 22 November 1992

Construction Safety Seminar
Safety Organization of the Philippines
J. Regala Memorial Building
Cordillera St., Mandaluyong City
Philippines
17 – 18 February 2000

Petroleum Fire Fighting and Safety Seminar
Petron Bataan Refinery
Philippines
29 June 1989

Companies: (Overseas)

TECHNIP
P.O. Box 2119, 5th Floor
HBK Tower
Doha, Qatar
Position: Assigned HSE Supervisor for QATOFIN project at Mesaieed Industrial City
Date: 11 November 2007 to present
Project: Construction of Low Linear Density Polyethylene Plant

Note: My contract will end on 31 March 2009

GAMA AL-MOUSHEGAH ARABIA LTD.
Kingdom of Saudi Arabia
Position: HSE Sr. Supervisor & Training Officer
Date: 01 October 2000 – 30 October 2007
Projects: Construction for the expansion of Petrokemya
Polyethylene Plant in Jubail, Kingdom of Saudi Arabia

Construction for the expansion of Berri Gas Plant in Jubail,
Kingdom of Saudi Arabia

Construction of Steam Power Plant located in Shoaiba,
Jeddah, Kingdom of Saudi Arabia

SAUDI ARCHIRODON COMPANY LTD
Jeddah, Kingdom of Saudi Arabia
Position: HSE Supervisor
Date: 15 May 1999 – 31 May 2000

ABDULLAH H. AL-SUWAYER COMPANY
Dammam, Kingdom of Saudi Arabia
Position: HSE Supervisor
Date: 31 May 1998 – 30 June 1999

Companies: (Local)

MASTERSKILLS ENTERPRISES
Manila, Philippines
Position: HSE Supervisor
Date: 16 June 1995 – 30 June 1997

PROGRESSIVE SKILLS COOPERATIVE DEVELOPMENT
Manila, Philippines
Position: HSE Supervisor
Date: 31 March 1993 – 31 April 1995

SAN MIGUEL CORPORATION
Manila, Philippines
Position: HSE Supervisor
Date: 11 May 1987 – 15 February 1993

Duties and responsibilities:

* Attends all site planning, progress and other appropriate site meetings, particularly those where sub-contractors are involved.
* Participate in the weekly HSE and monthly management walk-through inspection and meeting and to tackle noted observations/findings.
* Supervise project execution sites to assure that all the prescribed safety procedures and equipment are fully adopted both by Company staff and sub-contractors.
* Review the contractor safety performance by inspection and by acquiring data in order to provide means to improve overall HSE standards.
* Coordinate with the various phases of construction commissioning and the sub-constructors activity to minimize interference and hazards that may arise during the operation.
* Lead the implementation of the HSE management systems (OHSAS – 18001 & ISO 14000).
* To provide information to management regarding work stoppages that may arises during unsafe conditions.
* Ensure that all Tool box meetings are being conducted on daily basis by the sub-contractors and any deviations that have been identified the previous day are projected in the meeting to avoid recurrence.
* Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
* Inspect facilities, machineries and safety equipments to identify and correct potential hazards and to ensure safety regulations compliance.
* Conduct interviews on to obtain first-hand information about work place incidents/accidents and near-misses and about work environments.
* Conduct assessment on sub-contractor HSE Officers in order to determine their safety performance and qualifications and experiences.
* Conduct on site inspections of all cranes to determine and evaluate their serviceability.
* Observed the conduct of scheduled Quarterly Drills and other drills being undertaken by the main contractor.
* Initiate the Safety Posters competitions to induce awareness to all site personnel including sub-contractors.
* Inspect and evaluate work place environments, equipments and related work practices in order to ensure compliance to site safety rules and regulations.
* Assure appropriate safety compliance monitoring and implementation of project work permits system.
* Review and/or critique sub-contractors incident and investigation notifications and reports.
* Review work method statements and job analysis procedures submitted by sub-contractors before start of any site work.
* Participate in the conduct of periodic workers camp inspection for sub-contractors to determine the environment conditions, hygiene as well as implementation of other safety measures.
* Facilitate regular HSE Officers daily walk-through inspection and adopt on the spot corrective measures.
* Provide technical safety support and assistance to construction management personnel as required to effectively and proactively manage safety cultures, issues and other related concerns during the construction execution phase.
* Actively monitor project safety performance, potential hazards, identify trends and improvement and thereby implement corrective actions.
* Participate in the weekly management safety meetings and other meetings related to safety matters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 2563)

Go to Search Parameters...

Brief Description

I am a diversely experienced Occupational Safety and Health professional with demonstrated experience in managing safety and health departments, as well as providing environmental support for chemical manufacturing sites.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

I am interested in any local position as a Scientist, Assistant Scientist, Associate Scientist, Technologist, or Laboratory Technician in the field of Microbiology or Biology. I would like an opportunity to post for any position that would fit these criteria.

Over 6 years comprehensive experience in environmental and waste management consultancy, management, supervision for various industrial sectors. Supplemented with experience in health and safety in construction sector. Certified Manager of ISO 14001, NEBOSH certificate with distinction.

Preparation of Environmental Management & Monitoring Plan of construction activities of Road Projects

Experienced and trained in Environmental, Forestry, Mining, Surveying, Mapping and GIS.

I AM DIPLOMA HOLDER IN CHEMICAL TECHNOLOGY HAVING MORE THAN 16 YRS EXPERINCE IN OIL AND GAS FIELD

Web Logic Admin

Managed a team of implementation project managers for debit card processing.

Senior Geologist with expertise in applied geology (geology applied to mining including blasting, slope stability, hydrogeology, reclamation, etc), research, evaluation and communication skills. Preference is contract or project work.

*Knowledgeable of a broad base of local, States and Federal regulations: including DOT, OSHA, States R-T-K, VOCs, HAPs, TSCA, EPCRA, CERCLA, SARA, confined spaces, hazardous/non-hazardous wastes including waste reduction, worldwide inventory status, etc.

Excellent knowledge of environmental, health, and safety (EHS) regulations. HazMat Certified. First-rate skills in presentations, leadership, and problem solving. Diplomatic with good communication and interpersonal skills. Excellent knowledge in computer applications. Bilingual English - Spanish.

Qualified QEP with proven expertise and success in the planning and implementation of environmental and waste management programs. Proven success in program planning and delivery in China and Southeast Asia

Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.

Industrial By-Product environmental compliance and management, that focuses on utilization wherever practical to reduce costs while maintaining environmental safety. Primary experience is with coal combustion by-products.

Dynamic HSE leader with impressive global accomplishments in safety, industrial hygiene, medical services, regulatory compliance and training. Key successes as Construction HSE Director, Corporate Safety Director, Military Scientist, Research Chemist and Certified Industrial Hygienist.

Possess 7 years of experience in Environmental health & Safety Engineering, having worked for several companies/ firms in India, UAE & Australia. Provided various kinds of environmental & safety services like Design, erection & Commissioning

Industrial Electrician with experience on comissioning, maintenance and PLC.

Master degree in Environmental Health, More than 15 years working in environmental Health field.

Health, Safety, Environmental & Quality - Integrated Management System Coordinator, Document Control

Working as HSe Engineer since past 10 years for various sectors like power plants, pipelines , Railroad and Highway etc. Being a Civil Engineer I can take up responsibility of any kind of HSE responsibility in Engineering Projects.

I did Master's Degree in Exploration Geophysics and Sixteem years experience in the field of groundwater exploration.

I am a Graduate of ENvironmental Engineering with PG Diploma in Industiral Pollution Control and MBA . I am having 16 years of experience in Environmental Engineering field in petroleum sector. I am EMS Lead Auditor too.

I am very interested in a HS&E position with your company. I feel my 29 years experience would be an asset to your company. professional. I¡¦m recognized for my initiative, creativity and dedication to employee safety. I feel that my diverse background in various industries would be an asset.

P.Eng., Over 20 years’ experience in design and construction of oil and gas, petrochemical and power generation industries, Knowledge of ASME II & VIII, B31.3, TEMA, API 650. API 610, and CSA , Led more than five industrial projects on schedule and within budget

Free! Piping Designer with 20 years experience in the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

To manage and provide direction and regulatory expertise to efficiently develop, implement, audit and maintain procedures and programs in compliance with regulations and company policies.

I am a Hydrogeologist/Aqueous Geochemist. I hope to utilize my problem-solving skills, analytical abilities, and knowledge gained through working experience in providing innovative solutions to the company’s operations. I hold a PhD from New Mexico Tech in the area of Environmental Geochemistry and

I have extensive experience in treating large animals and birds

I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.

Safety engineer

Mohamed Aly EL Sirsy is a Civil Engineer with respectable knowledge and experienced in planning & designing both Water & Waste water treatment plants in addition to sewerage & water supply net works, including environmental studies as well.

Expertise in hydrological analysis and design, river engineering studies, analysis of sediment transport and river morphology, river modelling with MIKE 11 and MIKE 21C, water management with people’s participation. Excellent managerial and communicative capabilities as well.

I have been working at Caterpillar Inc working on primarily mining products and engine products in a design engineer role. I have many different experiences working with mining and construction customers resolving problems with their products with engineered solutions.

I have been an HSE Supervisor for the past twenty (20) years for local and overseas. All inquiries have been incorporated in my own curriculum vitae.

PE with 13 yrs exp in petroleum ind, gov research, eng consultancy, proj manager for RCRA/CERCLA programs for the U.S. Air Force. Past 6yrs managed the tech proj planning, budgeting, cost estimating, contract proc/admin, and contractor oversight for the execution of eng invest, const and O&M projs.

Environmental & Water Resources Engineering Specialist - Mining

Free! Graduate Batchelor of Science in Psychcology & Criminology

Geodetic Engineer with experience in Geographic Information System and Remote Sensing.

Environment Specialist at an environmental consulting firm engaged in the conduct of EIAs, Feasibility Studies and Environmental Due Diligence and various environmental consulting services

To deliver the approve items to the enduser or requestor as well as received the delivery items and monitoring the expiration of all items, data encoder and performing other duties and responsibilities may occurred.

A results-oriented Chemical Engineer with extensive experience in the Environmental industry. Focused on process improvement aimed at ensuring safety, compliance, and cost efficiency. Proficient in all Microsoft Office applications.

Contract Technical Author, Framemaker, Word, Office, Dreamweaver,

Nine years experience as a Metallurgical Engineer and Product Specialist in the Surgical Industry possessing extensive experience in various aspects of operations (ISO14001, OHSAS 18001, SA 8000 standards) industrial production,corrosion and manufacturing of surgical instruments.

Currently I am a Public Health Design Engineer working for Robert Mathews Johnson Marshall in Dubai UAE, an international engineering consultancy. I have gained extensive knowledge for Plumbing and Drainage Design works for almost 6 years for various projects local and international.

Environmental hydrogeologist with great expierence in assesment and remediation of ground water contamination

Mechanical Design, CAD-Pro/E, Unigraphics, Ideas

ESRI ARCGIS ARCOBJECTS C#.NET DEVELOPER, ARCSDE PROFESSIONAL

PLC,SCADA

Certified Radiation Safety Officer. Also, years of experience as a QC/QA Supervisor for drug manufacturing while implementing FDA cGMP regulations.

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out