Resume - I AM DIPLOMA HOLDER IN CHEMICAL TECHNOLOGY HAVING MORE THAN 16 YRS EXPERINCE IN ...

Misco Jobs

Resume #81063

CONTACT INFORMATION:
View contact information...

Years in Oil & Gas Fields in Onshore facilities.

JUNE 2008 – JAN 2009
Worked as a Field Commissioning Operator in South Pars Oil and Gas Co,
A parent company of National Iranian Oil Co, through GS ENGG & CONS CO.
MAY 2004 – MAY 2006
Worked as a POWER PLANT FOREMAN in Greater Nile Petroleum
Operating Co. Ltd. (G N P O C), SUDAN (North Africa) ON – SHORE,
Plant.

MAY 1999 - MAY 2004
Worked as a PLANT OPERATOR in GNPOC, SUDAN
(North Africa) ON - SHORE.

JUNE 1993 - MAY 1999
Worked as a PLANT OPERATOR in OIL & NATURAL GAS
CORPORATION (ONGC) in Central Processing Facility (CPF) GANTHAR
Field ON - SHORE

JULY 1992 - MARCH 1993
Worked as a WATER TREATMENT PLANT OPERATOR in NATIONAL
KHARAFI CO. KUWAIT.

SEPTEMPER 1989-JUNE 1992
Worked as a PRODUCTION OPERATOR in OIL and NATURAL GAS
COMMISSION (ONGC) GANTHAR FIELD, ON-SHORE.

FIELD EXPERIENCE

* Crude Oil Stabilization Unit (3-Phase)

* Gas Compressor

* Condensate Fractionation Unit

* Gas Dehydration Unit(Glycol)

* Gas Cooling Unit (propane)

* Free Water Knock-Out Tank

* Crude Oil Pumping Unit

* Diesel, Gas Generator

2 of 5

HANDS OF EXPERIENCE:
OIL & GAS PROCESS:

Crude Oil Stabilization Unit (HP, MP & LP Separation Unit)
Water Injection Unit
Gas Injection Unit
Gas Dehydration Unit (Glycol)
Gas Compression Unit
Boiler & Heater Treater (Gas Fired)
Crude Oil Pumping Station
Waste Water Treatment Plant
Fire Water Pump House
Utility Units.

SUMMARY OF PAST EXPERIENCE

During the Past & Present Career Experience in the following areas.

* Oil & Gas Gathering Stations
* Control Panels
* Early Production Facility
* Central Production Facility & Tank Farm
* Gas Compression and Gas Injection Plant
* Water Treatment & Injection Plant
* Diesel Generator ( 3.5 MW )

JOB DESCRIPTION:

DIESEL GENERATOR OPERATIONS:
Starting/Stopping procedures of Rolls Royce Engines ( Wood Ward Control System
Complete crude operation of generators ( 3.5 MW ), lube oil system, starting air system
And trouble operating system.

CRUDE SEPERATION SYSTEM:

Purification of crude from water and sediments from purification to enhance smooth
Operation for generators

CENTRAL PRODUCTION FACILITY AND TANK FARM:

Receiving Crude from different Gathering Stations, Gas Boot & Free Water Knockout
Tank, Dehydration Tank, Desalination Tank, Produced Water Tank, Skimmer Tank,
Storage Tank operations, Emulsion Treatment by Electrostatic Heater-Treater and
Demulsifier Injection Pumps, Injection Rate calculations. Desalting Crude through
Electric Desalters, Crude Oil Transfer Pumps, LACT (Least Automotive Custody
Transfer) Unit Water Injection Pumps,LACT meter proving, shipping pumps, Trouble
Shooting as per Cause & Effect Logic's, Operation of Gas Turbines for Generator,
Compressors. Pumps & Fire Water Pumps. PIG Launching/Receiving, preparation of
Production Reports, Well-Test Data Entry, SCADA (Supervisory Control And Data
Acquisition, Serck Controls U.K) & DCS (Distributed Control System) operations.
Well aware of plant safety equipment's Emergency procedures etc., Conversant in
Handling Crude Stabilization Unit, Vacuum Separator, Vacuum Compressors. Also
Successfully operated Central Production Facility Capacity of 2,80,000 bbls/d.

SECONDARY RECOVERY

Gas Injection, Gas Lift, Water Injection operation of High Pressure Gas Injection
System, High pressure Gas Injection wells. Operation of Artificial Gas Lifts wells (Intermittent) and Continues Lift). Operation of Gas Lift Compressors, casing De-Pressurizing, Water Lift Manifolds, Water Injection Pumps etc.

WATER TREATMENT AND INJECTION PLANT

Pre-Treatment of River Water (TSS>50mg/Ltr). Water Filtration (2 Micron Count >400)
Deaeration etc., Filters (Dual) Deaerators, Charge Pumps and Transfer Pumps. Injection
Well Head Operations and Water sampling etc.

UTILITIES:

Well experienced in Utility Operations such as a Gas Turbine Generator, Utility and
Instrument Air Compressor, Centrifugal Pump, Piston Pumps, Water Treatment Plant,
Produced Water Treatment Plant, Raw Water Treatment, Sewage water and effluent
Treatment, Cooling Tower, Chemical Injections.

REBOILER:

Maintain the Reboiler Temperature, Glycol Level, Fuel Gas to Pilot Gas supply, Still
Coloumn Temperature setting, maintain Glycol Level, 3 way valve function. Logsheet for Glycol Re-generation Unit and Control Room reading.

COMPUTER KNOWLEDGE:

Knowledge on:
1. MS-Word
2. MS-Excel
3. Ms-Office

PERSONAL POSITIVE STRENGTHS

Social Adaptability
Hard Worker
Ability to work under pressure
Punctuality
Self Organizing

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 2568)

Go to Search Parameters...

Brief Description

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

I am interested in any local position as a Scientist, Assistant Scientist, Associate Scientist, Technologist, or Laboratory Technician in the field of Microbiology or Biology. I would like an opportunity to post for any position that would fit these criteria.

Over 6 years comprehensive experience in environmental and waste management consultancy, management, supervision for various industrial sectors. Supplemented with experience in health and safety in construction sector. Certified Manager of ISO 14001, NEBOSH certificate with distinction.

Preparation of Environmental Management & Monitoring Plan of construction activities of Road Projects

Experienced and trained in Environmental, Forestry, Mining, Surveying, Mapping and GIS.

I AM DIPLOMA HOLDER IN CHEMICAL TECHNOLOGY HAVING MORE THAN 16 YRS EXPERINCE IN OIL AND GAS FIELD

Web Logic Admin

Managed a team of implementation project managers for debit card processing.

Senior Geologist with expertise in applied geology (geology applied to mining including blasting, slope stability, hydrogeology, reclamation, etc), research, evaluation and communication skills. Preference is contract or project work.

*Knowledgeable of a broad base of local, States and Federal regulations: including DOT, OSHA, States R-T-K, VOCs, HAPs, TSCA, EPCRA, CERCLA, SARA, confined spaces, hazardous/non-hazardous wastes including waste reduction, worldwide inventory status, etc.

Excellent knowledge of environmental, health, and safety (EHS) regulations. HazMat Certified. First-rate skills in presentations, leadership, and problem solving. Diplomatic with good communication and interpersonal skills. Excellent knowledge in computer applications. Bilingual English - Spanish.

Qualified QEP with proven expertise and success in the planning and implementation of environmental and waste management programs. Proven success in program planning and delivery in China and Southeast Asia

Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.

Industrial By-Product environmental compliance and management, that focuses on utilization wherever practical to reduce costs while maintaining environmental safety. Primary experience is with coal combustion by-products.

Dynamic HSE leader with impressive global accomplishments in safety, industrial hygiene, medical services, regulatory compliance and training. Key successes as Construction HSE Director, Corporate Safety Director, Military Scientist, Research Chemist and Certified Industrial Hygienist.

Possess 7 years of experience in Environmental health & Safety Engineering, having worked for several companies/ firms in India, UAE & Australia. Provided various kinds of environmental & safety services like Design, erection & Commissioning

Industrial Electrician with experience on comissioning, maintenance and PLC.

Master degree in Environmental Health, More than 15 years working in environmental Health field.

Health, Safety, Environmental & Quality - Integrated Management System Coordinator, Document Control

Working as HSe Engineer since past 10 years for various sectors like power plants, pipelines , Railroad and Highway etc. Being a Civil Engineer I can take up responsibility of any kind of HSE responsibility in Engineering Projects.

I did Master's Degree in Exploration Geophysics and Sixteem years experience in the field of groundwater exploration.

I am a Graduate of ENvironmental Engineering with PG Diploma in Industiral Pollution Control and MBA . I am having 16 years of experience in Environmental Engineering field in petroleum sector. I am EMS Lead Auditor too.

I am very interested in a HS&E position with your company. I feel my 29 years experience would be an asset to your company. professional. I¡¦m recognized for my initiative, creativity and dedication to employee safety. I feel that my diverse background in various industries would be an asset.

P.Eng., Over 20 years’ experience in design and construction of oil and gas, petrochemical and power generation industries, Knowledge of ASME II & VIII, B31.3, TEMA, API 650. API 610, and CSA , Led more than five industrial projects on schedule and within budget

Free! Piping Designer with 20 years experience in the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

To manage and provide direction and regulatory expertise to efficiently develop, implement, audit and maintain procedures and programs in compliance with regulations and company policies.

I am a Hydrogeologist/Aqueous Geochemist. I hope to utilize my problem-solving skills, analytical abilities, and knowledge gained through working experience in providing innovative solutions to the company’s operations. I hold a PhD from New Mexico Tech in the area of Environmental Geochemistry and

I have extensive experience in treating large animals and birds

I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.

Safety engineer

Mohamed Aly EL Sirsy is a Civil Engineer with respectable knowledge and experienced in planning & designing both Water & Waste water treatment plants in addition to sewerage & water supply net works, including environmental studies as well.

Expertise in hydrological analysis and design, river engineering studies, analysis of sediment transport and river morphology, river modelling with MIKE 11 and MIKE 21C, water management with people’s participation. Excellent managerial and communicative capabilities as well.

I have been working at Caterpillar Inc working on primarily mining products and engine products in a design engineer role. I have many different experiences working with mining and construction customers resolving problems with their products with engineered solutions.

I have been an HSE Supervisor for the past twenty (20) years for local and overseas. All inquiries have been incorporated in my own curriculum vitae.

PE with 13 yrs exp in petroleum ind, gov research, eng consultancy, proj manager for RCRA/CERCLA programs for the U.S. Air Force. Past 6yrs managed the tech proj planning, budgeting, cost estimating, contract proc/admin, and contractor oversight for the execution of eng invest, const and O&M projs.

Environmental & Water Resources Engineering Specialist - Mining

Free! Graduate Batchelor of Science in Psychcology & Criminology

Geodetic Engineer with experience in Geographic Information System and Remote Sensing.

Environment Specialist at an environmental consulting firm engaged in the conduct of EIAs, Feasibility Studies and Environmental Due Diligence and various environmental consulting services

To deliver the approve items to the enduser or requestor as well as received the delivery items and monitoring the expiration of all items, data encoder and performing other duties and responsibilities may occurred.

A results-oriented Chemical Engineer with extensive experience in the Environmental industry. Focused on process improvement aimed at ensuring safety, compliance, and cost efficiency. Proficient in all Microsoft Office applications.

Contract Technical Author, Framemaker, Word, Office, Dreamweaver,

Nine years experience as a Metallurgical Engineer and Product Specialist in the Surgical Industry possessing extensive experience in various aspects of operations (ISO14001, OHSAS 18001, SA 8000 standards) industrial production,corrosion and manufacturing of surgical instruments.

Currently I am a Public Health Design Engineer working for Robert Mathews Johnson Marshall in Dubai UAE, an international engineering consultancy. I have gained extensive knowledge for Plumbing and Drainage Design works for almost 6 years for various projects local and international.

Environmental hydrogeologist with great expierence in assesment and remediation of ground water contamination

Mechanical Design, CAD-Pro/E, Unigraphics, Ideas

ESRI ARCGIS ARCOBJECTS C#.NET DEVELOPER, ARCSDE PROFESSIONAL

PLC,SCADA

Certified Radiation Safety Officer. Also, years of experience as a QC/QA Supervisor for drug manufacturing while implementing FDA cGMP regulations.

2008 -MSc. Mining Engineering- To defend Thesis by December 2008. - University of Mines and Technology, Tarkwa. Ghana Strong Human Relationship Skills . Sound written and communication skills. Strong Technical Mine Planning and Production skills. Strong computer skills,MS Office, AutoCad, Surpac

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out