Resume - Bachelor in Engineering - Metallurgical Engineering.

Misco Jobs

Resume #81421

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position in the Engineering Service Industry, where I can utilize my previous work experience and expertise to advance in to upper level management.

Education:
Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty Of Technology & Engineering
University: Maharaja Sayajirao University, Vadodara, Gujarat, India.

Work Experience:

Name of the company: Elecon Engineering Company Limited,
Location: Vallabh Vidyanagar, State: Gujarat, Country: India.
Company is engaged in Heavy Engineering Equipment Manufacturing i.e. Material Handling Equipments like stacker reclaimer, loader – unloader, long material conveying systems and Industrial Power Reduction Gear Boxes.

Positions & Working duration:

Senior Manager:
2004 Onwards.
Along with above responsibilities added responsibilities given were over all In-charge of Heat Treatment Shop, Metallurgical Quality Control & Material Testing Laboratory i.e. Metallography, Mechanical testing of Metallic material & Chemical analysis of Metallic Material.
Deputed as Coordinator to Management Representative for ISO 9001 implementation and Maintenance in the entire organization. Document preparation and implementation at all stages.
Deputed as Technical Manager & Quality Manager to implement & maintain the accreditation of Material Testing Laboratory according to ISO / IEC 17025. Document preparation, authorization, distribution & implementation within the laboratory.
Vendor development, educating them for QMS & TQM etc.

Manager:
1998 to 2004.
Along with above said responsibilities the added responsibilities for Quality Control at Inward stage, Process stage and final stage added for Metallurgical and Dimensional. Here also take care of Hardness & Dimension measuring instruments and metallurgical microscope with image analyzer. Process improvement, validation etc. to achieve & fulfill customer requirement. Write down the SOP and implement in the routine work..

Deputy Manager:
1988 to 1998.
During this period along with above said responsibilities worked for process improvement and establishment. Here I have change the process parameters, accessories etc. to achieve consistent quality with minimum cost & rejection or rework. This effort produces effective process cost reduction to the 30% i.e. saving in electricity and consumables and reduction in process cycle time i.e. productivity increased by 12%. Process improvement with process cost reduction.

Technical Executive:
1984 to 1988.
During this period along with Junior Engineer responsibilities worked for fixture selection (here I have recommend to change the material of fixture from Mild steel to Heat Resisting steel) which gave maximum utilization, improved output, improved life of fixture, minimum distortion, reduction in process cost and reduction in rejection cost etc. Planning & Production responsibilities.

Junior Engineer:
1980 to 1984.
During this period I have to look after the day to day working of Heat Treatment shop. Maintaining and updating log book with day to day working. Supervising the workmen and routine work and controlling various processes like Carburising, Hardening, Tempering, Annealing, Isothermal Annealing Pearlitizing, Normalizing, Stress Relieving etc. Here worked in all the three shifts.

Technical Apprentice:
1979 to 1980.
During this period I have been trained to work on shop floor in Heat Treatment shop.

Additional Responsibilities:

Assisting / helping / guiding in vendor development for bought out items for the organization.

Educating, developing and helping in upgrading the subcontractors to comply with the specified requirements.

Helping for establish TQM / QMS at vendor end.

Assisting / guiding Design & Development Department for selection of material & heat treatment according to the application.

Carry out metallurgical failure investigations and suggest remedies / changes in process sequence / material condition etc. to relevant department.

Maintaining all relevant documents for process, quality records and all test data in a proper manner that can be retrieve by all relevant easily as and when required.

Initiating budget proposals for testing equipments and other resources according to expansion plan, modernization, testing reliability improvement and effectiveness.

Managing fabrication of steel to steel, steel to alloy steel, steel / cast iron to non ferrous, steel to stainless steel.
Preparing, implementing & maintaining WPS, WPQ & PQR for various welding processes according to ASME SEC IX.

Personal: Marital status: Married
Children: One daughter & one son
US residential status: Green card holder, can work for any employer in United States.

References:

* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 2563)

Go to Search Parameters...

Brief Description

EPC Project Contracts 'Interface/Liaison' Administration Specialist

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

A Management position in an environment that offers quality-working opportunity in the fields of Photogrammetric Engineering & GIS and , in return, invest my long-term experiences, interpersonal skills, talents and abilities.

Heavy Equipment Operator

Ph.D in Biotechnology with experience in biological control seeking a suitable job in R&D or Production

A management position in a results-oriented company that seeks an ambitious and career conscious person, where acquired skills, experience, and education will be utilized toward continued growth and advancement.

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

Anywhere that needs help in storage, treatment, or disposal needs for hazardous waste, wastewater treatment, remediation, air quality issues, or safety in the workplace.

Chemical Engineer w/15 years experience in environmental compliance, waste management, environmental permits, ISO14001, and safety (HAZCOM) training.

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

MS Word, Excel, Powerpoint knowledgeable, Internet Savvy, Intermidiate Software trouble shooting

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

An MSc Holder in Environmental Practice; Pollution Management with trainings in oil spills from OSRL/EARL Limited UK, and health and safety course from Allied healthcare UK. Have experience in environmental consulting and researching. IT literate, able to use ArcGIS, work on own initiative or as par

Results-driven professional with 20 years experience in patient research studies, data analysis, medical terminology and management. Consistently successful interactions with all staff levels while providing excellent customer service and flexibility using highly effective verbal and written communi

24 years experience in the environmental field, General A Engineering Contractor, Project Manager, Sales, Marketing, work plan development, heavy equipment operator, hazardous waste management (RCRA, CERCLA< HSWA), UST management, design, installation of remediation treatment systems (all types).

Environmental / Safety Engineer More than 10 years experience

Safety Health & Environmental Engineer/Consulant/Energy

Civil engineer with some experience in environmental compliance and regulations

As you will note on the enclosed resume, the breadth of my expertise covers a wide area of responsibilities. I have leadership, analytical and team work skill. I am recognized for flexibility, adaptability and for a high degree of expertise in the accounting or finance field.

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

James is a biologist in marine and coastal ecosystems and associated marine issues, as well as geographical information systems (GIS).

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Sound understanding/ implementing of HSE Management System.

hold a Bachelor's Degree in Biomedical Engineering ,

„Ï 9+ years experience in PRODUCTION FIELD.

EHS Management Expert with 14+ years of Experience

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

Bachelor in Engineering - Metallurgical Engineering.

Registered Professional Engineer Experienced in Project Management and Construction

Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment, Remediation, BioWin, Modeling, Stormwater, Groundwater modeling

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Electronic integrated controls, PLC control, installation repair and preventative maintenance

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

A professionally qualified Engineer and Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical, training and management disciplines as well as practical, 'hands-on' involvement.

Over 14 years of Environmental Engineering services in the area of subsurface contamination and remediation of petroleum and non petroleum hazardous waste sites. Skills range from design and supervision to management and business development.

Moving To Thomaston Area Georgia need Work 4/1/04

Environmental Scientist with Sales, managerial and training experience.

Mining Engineer and Geologist with twenty-seven years in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and environmental achievements. Advanced technical and strong supervisory skills.

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out