Resume - OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT)...

Misco Jobs

Resume #82094

CONTACT INFORMATION:
View contact information...

NTEGRITY ENGINEERING MANAGER
PIPELINE+STRUCTURAL+PLANT+CRYOGENIC TANK

OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT) Pharmaceutical, STP

PIPELINES /Piping/Pressure Vessels/ Process Equipments/Modules/ Oil & Cryogenic Storage Tanks/Structurals

FEED-QA/QC—(DESIGN)-DETAIL ENGINEERING
MATERIALS (Specification/Inspection/Management)

FABRICATION-INSPECTION-SUPPLIER INSPECTION-INSTALLATION-TESTING-COMMISSIONING & INTEGRITY

Materials of Expertise: SS / DSS / AS / CS/ LTCS / DI * RTP / GRP / GRE / FRP / PIP / PP / HDPE/MONEL/INCONEL/CUPRONICKEL

AWS-ISO Lead (QMS) –NDT-RBI

CONTENTS OF THE CV

TITLE BOX (PREVIOUS-FIRST PAGE)

COVERING LETTER

EDUCATIONAL QUALIFICATIONS

CREDENTIAL / CERTIFICATIONS

ISO CERTIFICATION

WELDING QUALIFICATIONS

NDE CERTIFICATIONS

COMPUTER PROFICIENCY

QA/QC - Pages 38, 39 Talks about of Fracture Control in
Pipelines installations.

DATE: 23.04.2009

Dear Sir:

I am an Engineer in Mechanical Discipline and at present I am working as a Consultant with ECOTECH WORLD in Chennai India.
(Piping/Pipeline, Pressure Vessels, Modules and oil & Cryogenic Storage Tanks, Structural, which includes Design and Detail Engineering, QA/QC, RBI, ISO, Plant Inspection, Supplier Inspection, Materials, Fabrication Inspection, Welding, Maintenance, NDT, Heat treatment, Protection Coatings and Installation, Testing and Commissioning)

We provide services to the Contractors and Fabricators those who are working for Refineries and Petrochemical Plants for Construction, Maintenance and Turnaround –Revamping etc.

I have involved lot of Pipeline projects for the last 24 years. I have completed six pipeline projects (Up to 48 inches pipe) in my carrier in addition to the Piping in the plant.-With thorough knowledge of detail engineering, Federal rules(DOT),HCA-requirements, Crossing details, Concrete Coatings, Hydro test requirements, all kind of Leak Testing(13), wall thickness calculations, complete knowledge of equipments and machineries, RCFA,RBI and excellent knowledge in Integrity Management Programmes.

I have excellent combination expertise in INTEGRITY of Piping with Spring supports, Pipelines -Structural with Slide bearing Supports, Pipelines U/G or above ground(cross country), Plant equipments and also integrity for Cryogenic Tanks – AE (acoustic emission).

The project value varies in general is US D 250 M to USD 2 Billons and it is comparable to today's USD 6 Billons Project.

I had been working around six years in UAE (Abu Dhabi, Dubai, Alain, Mafraq, Musafah and Ruwais) for various projects (2000-2006) (out of twenty four years).

I have 24 years of hands-on experience in Projects Management (Consultancy and Construction) in the following areas.

- Fracture Control Pipeline Installation Methods.

- Oil and Gas (Both Upstream and Downstream), Petrochemicals, Power (Nuclear/Thermal), STP, Drugs and Pharmaceuticals.

- QA/QC, ISO 9001 (IRCA Lead Auditor QMS)

- Front End Engineering Design (FEED)

- Design & Detail Engineering

 Materials (Specification, Inspection, Management)

 Preparing Data sheets and Technical Specification for all Pipes, Fittings, Valves and Equipments in Oil and Gas, Petrochemicals, Power (Nuclear/Thermal), STP, Drugs and Pharmaceuticals.

 Fabrication inspection of all kinds of Piping/Pipeline, Pressure vessels, Process equipments, Structurals, Modules, Oil and Cryogenic Storage tanks and Structural works, HVAC systems.

 Excellent Knowledge in LPG/CNG installations with complete knowledge in Designs like wall thickness calculations as per ANSI B 31.8 for Gas Transmission Distribution System Piping/Pipeline based on location and additional facility requirements with the input of temperature)

 I have excellent knowledge in Modules/Skids

 Vender Assessment and Inspection

 Technical evaluation of all vender submittals to suit client's specification.

 Non Destructive Examination (NDT-Qualified)

 Welding inspection. (AWS Qualified)

 (Member: American Welding Society )

 Equipment follow-up.

 Execution and Commissioning.

 I have visited almost all the industries in INDIA as well as in UAE(from Musafah to Jebelali free zone) starting from raw material to final stages of inspection(Pump to Valve, coatings and Cranes and to Pressure Vessel so many ) till the shipping or delivery either alone or along with Third party inspection agencies as per the Quality Plan.

 Design Calculation for Pressure Vessels – Permissible Working Pressure on Equipments.

 Complete Design Calculations relevant to Piping/Pipeline (full details given).

 Excellent Knowledge on Understanding, Developing and Implementing RBI-Risk Based Inspection-RBM-Risk Based Management (Integrity and Asset) (RBIM, RBAM) for cost-effective inspection and maintenance program that provides assurance of acceptable mechanical integrity and reliability.
 Excellent knowledge on Selection of Valves.

 Installation, Testing and commissioning of all Static and Rotating Equipments.

 Excellent Knowledge on BOPs. (Wellhead Christmas trees Valves) – Concepts, functioning, Safety, Norms and Economics.

 Excellent knowledge on Oil well types and Upstream Processes to work very effectively in the FIELD (for ex. Artificial Airlift and Produced water management -utilization for EOR or disposal)
(Planning, Drilling, Completion, Production,
Abandonment)

 I have expertise in all type, size and industry Piping/Pipeline.

 For ex. 1/4'' tube to 48'' UG Piping/Pipelines.

 I had an excellent basement in Kalpakkam Atomic Energy, Department of Atomic Energy- Chennai- India for the Piping/Pipeline, materials, inspection and related documentation works.

 I worked with a Consultancy company (Detail Engineering) for 7+ 4 years (out of 24 years) in which I spent preparation of specification for pipes, fittings, and valves and for all process equipments also with complete Piping/Pipeline Design Calculations including FEED.. Being working in a Consultancy company I contributed a lot in technical and commercial evaluations regarding Piping/Pipeline, process equipments and related materials.

 I have been working for longer years with a team of Basic, Process, Design and Details Engineering set up.

 Since I got excellent combination of project management office and construction site expertise, I can easily visualize the things. And also suitable alternative solution can be proposed when problem arises. In fact preventive measures will be taken in advance.

 I have extensive knowledge in all international codes and standards.

 In addition to this I have thorough knowledge in welding inspection, NDT (Level II in RT, UT, MPT, VT, LPI) also IRCA-Approved Lead Auditor-ISO 9001 - QMS-Certification.

 Also I have completed AWS – (A) CWI examination (Dec 2007) and I got the relevant certificates. (Also Member in American Welding Society)

 Familiar with all Welding processes like GTAW (TIG), SMAW (MMAW), GMAW (MIG), FCAW and SAW etc. (would have been inspected around 200, 000 joints)

 Familiar in Protective Coating(s) methods and requirements.(NACE,SSPC)

 Familiar in Insulation Materials as per the service requirements.

 Excellent documentation skills in QA/QC, especially preparation of Method statements for installation, testing, commissioning and Inspection and Test Plans (ITP) for mechanical equipments and Piping/Pipeline systems.

 Excellent overseas combination expertise –as- Material Engineer (Team Leader) and Lead QA/QC Engineer in different EPC projects, which involve more Materials, Piping/Pipeline and Mechanical works.(SAP and MAXIMO uploading for different projects-CMMS)

 Worked with a material management consultant company and provided excellent contribution for material management system for Abudhabi national oil company (ADNOC-BOROUGE) – Abudhabi Polymers Ltd- Ruwais-UAE and also for ABUDHABI and ALAIN for different power plants also in addition to EPC Projects.

 Excellent fabrication shop experience in UAE (Musafah) for Oil and petrochemical companies for their Maintenance and turnaround jobs (DSS Piping/Pipeline and process vessel fabrication inspection and Refurbishment jobs, Etc.)

 Review of ITB documents.

 Visited many venders/ manufacturers places for assessment, materials and Process Equipment inspection all over in India and Middle East.

I enclosed herewith my CV for your kind perusal and I am sure that my experience would certainly meet with your requirement.

I also would like to state that I have valid UAE Car Driving License.(2015)

I am available in Chennai India now. (UAE visa cancelled 30.03.2006)

I am Looking for a Challenging Carrier in a Consultancy or Construction Firm (PMC/EPC) or in Oil &Gas/Petrochemical field / (Upstream or downstream) or in Pipeline Infrastructure Projects where I can demonstrate my abilities and utilize my knowledge.

I Ensure timely COMPLETION of the Project without sacrificing the Quality and Safety and mainly WITHIN the estimated BUDGET.

Salary Expectations: US $ 19000 per month + accommodation, transportation.

I will be in a position to join immediately

Thanking you and looking forward to hearing from you soon Sir,

DATE & PLACE OF BIRTH: 16.02.1964, MADRAS – INDIA (45Yrs)

NATIONALITY: INDIAN

PASSPORT DETAILS: VALID UPTO 15/ 01 / 2017 (No. G 1504116)

RESIDENCE VISA DETAILS (UAE): CANCELLED (30.03.2006 )

DRIVING LICENSE DETAILS: HAVING VALID UAE CAR DRIVING
LICENSE ( ABUDHABI )

EDUCATIONAL QUALIFICATIONS:
(Attested by Ministry of Foreign Affairs –Abu Dhabi and Embassy of the United Arab Emirates-WASHINGTON-USA)

- BS Engineering (Mechanical)- June- 2003 from Kensington University –California –U.S.A.
- Mechanical Engineering – Diploma – First Class (April- 1984) Board of Technical Education and Training –Madras-India

CREDENTIAL / CERTIFICATIONS:

ISO CERTIFICATION:

ISO 9001: 2000 - Quality Management System
Approved IRCA Lead Auditor (IATCA-UK) and also Approved RAB / RWTUV USA – Internal Auditor.

WELDING QUALIFICATIONS:

AWS – (A) CWI - Current
American Welding Society
Member: American Welding Society
Code Book: API 1104 – Welding of Pipelines and Related facilities. Transmission and Distribution of Crude Petroleum, Petroleum products, fuel gases, Carbon dioxide, nitrogen for new construction and in-service welding

NDE CERTIFICATIONS:
(As per American Society for Non-Destructive Testing –SNT-TC-1A of ASNT)
All Level II

Visual Testing.
Penetrant Testing
Radiographic Testing
Ultrasonic Testing
Magnetic Particle Testing
 Knowledge on Acoustic Emission (AE) for Inspection of Cryogenic Tanks (Interpretation techniques) for its integrity.
 Excellent Knowledge on all types of Leak Detection Test, Procedures, Implementation, Inspection and Interpretation techniques with detailed knowledge on advantages and disadvantages to maintain Integrity of Pipelines.

YEARS OF EXPERIENCE:

Running 25 th Year

COMPUTER PROFICIENCY

 Operating System: Microsoft MS DOS, Windows and NT

 Software Application: MS Access, Excel, Word and Power Point

 Expertise in MS Office (Access) for handling CMMS (Computerized Material Management System) Services. Worked for ADWEA for Material Management Project (Abudhabi water and electricity authority – UAE) for MAXIMO uploading.

 Worked for the Material Management project Borouge Polymers (Petrochemicals Projects)*Abu Dhabi National Oil Company (ADNOC)- Ruwais.- UAE for SAP/ R3 4.6 Uploading.

 Having understanding of Marian 5.5 – Material Management Procurement and Supply Chain Software.

OBJECTIVES

Looking for a Challenging Carrier in a Consultancy or Construction Firm (PMC/EPC) in Oil &Gas (Upstream or Downstream)/Petrochemical field or in Pipeline Infrastructure Projects where I can demonstrate my abilities and utilize my knowledge.

AREAS OF EXPERTISE:

 For Pipelines Expertise please refer to further pages in separate Title. (With reference to Pipeline-Cross Country network.)

 Fracture Control Pipeline Installation Methods with excellent knowledge on cyclic plastic strains –pipeline girth weld for Reeling on/off for the pipelines.(while welded and coated pipelines are carried, transported and installed )

 I have excellent combination expertise in INTEGRITY of Piping with Spring supports, Pipelines -Structurals with Slide bearing Supports, Pipelines U/G or above ground(cross country), Plant equipments and also integrity for Cryogenic Tanks – AE (acoustic emission)

 FEED, QA/QC, DESIGN (Detail Engineering), PIPING/PIPELINE, MATERIALS (Specification, Inspection and Management) Fabrication–Welding Inspection (AWS) – Installation, Testing, Commissioning Start ups.

 Excellent fabrication inspection knowledge of Austenitic and Duplex/Super Duplex Stainless Steels Piping/Pipeline. (ASTM A 312-Gr.304,304L, 316,316L and AL 6 XN (SASS) (A790,A928,A890-- 904L * 2205,2207 * 2304, LDX 2101 and 2507 (DSS) In addition to Carbon Steel (A53, A106,API 5L,A671,A672,A691 ) and A 381 (High pressure) and Alloy Steel Piping/Pipeline (A335) and LTCS (A333, A334) and also Boilers-A192,A213,A210,A216,A204,A217,A387,A182 and structural ( A 36,BS 4346,A1011,API 2B,A500,A501)and Bolts Studs and Nuts (A307,A 325,A325M,A563) and also Excellent knowledge on Monel, Cupro Nickel and Inconel.

 Excellent Knowledge on Understanding Developing and Implementing RBI-Risk Based Inspection-RBM-Risk Based Management (Integrity and Asset) (RBIM, RBAM) for cost-effective inspection and maintenance program that provides assurance of acceptable mechanical integrity and reliability.
 Excellent Knowledge on BOPs. (Wellhead Christmas trees Valves) – Concepts, functioning, Safety, Norms and Economics.

 Excellent knowledge on Oil well types and Upstream Processes to work very effectively in the FIELD (for ex. Artificial Airlift and Produced water management -utilization for EOR or disposal)
 (Planning, Drilling, Completion, Production, Abandonment)

 Oil and Cryogenic Storage Tanks, CS –oil storage tanks and CS-Floating Roof Gas Holding Tank for Methane Gas Storage and SS- DM water / Cryogenic(Hydrogen) Tanks and CS –Molasses Storage tanks.

 Complete Maintenance knowledge for Piping/Pipeline, Pressure vessels like Heat Exchangers, Boilers, Valves Refurbishments, Surge Vessel Refurbishment, Pigging and Chemical cleaning activities especially for oil, Gas and Petrochemical throughout the carrier.

 Excellent knowledge in Structural(AWS D 1.1) ( (Pipe racks with slide bearing supports, Storage tanks structural, Plant hall /Turbine hall structural etc ) (also having knowledge in spring supports )

 Excellent knowledge of Modules/Skid for oil and Gas, petrochemical, power, Brewery and food industries.

 Valves Design and Selection( Concept to Commissioning)

 Thorough knowledge in International Codes and Standards. Full list has been given in further pages.

 Equipment list separately given in further pages in Particular to OIL and GAS separately

 In addition to the above Lot of Fermenters, Reaction Vessels, Hydrogenators, Heat Exchangers, Receivers, Storage Tanks –Vertical /Horizontal starting from raw material inspection, Fabrication inspection, testing and final commissioning(including the dynamic balance test where ever required-pump impeller or agitator shaft and shaft run out check using Dial gauges etc) and Dish forming inspection etc-(TorrisSpherical) and Nozzle orientation details.
 Complete Design Calculations relevant to Piping/Pipeline (full details given in further pages )

 Design Calculation for Pressure Vessels – Permissible Working Pressure on Equipments (complete details has been provided in further pages)

 Excellent Knowledge in LPG/CNG connections for Major Industries with complete knowledge in Designs like wall thickness calculations as per ANSI B 31.8 for Gas Transmission Distribution System Piping/Pipeline based on location and additional facility requirements with the input of temperature) (also familiar with other calculations )

 Expertise in Materials: SS / DSS / AS / CS/ LTCS /DI /RTP GRP / GRE / FRP / PIP / PP / HDPE/ MONEL/INCONEL/CUPRONICKEL

 Pipe sizes handled: CS pipes up to 48 Inches, SS – starting from ¼ inches to 16 Inches and GRE/GRP/FRP various sizes.
 Supplier Inspection (at manufacturer or vender or Fabricator's spots) either local or out of station – Complete LSTK –Project items irrelevant of Mechanical, Electrical, Instrumentation items etc.
 HVAC & R, NDT, ISO, Project Engineering & Materials Management and Excellent Documentation.

 For Pipelines Expertise please refers to further pages.

FRONT END ENGINEERING DESIGN

 Coordinate & manage all PIPING/PIPELINE handling deliverables for a number of projects(able to work under pressure-the excellent thing learnt in the Gulf) that range from providing design solutions to evaluating the detail design of the Piping/Pipeline and mechanical components.

 Preparation of Piping/Pipeline Handling Philosophy based on other design (process) philosophies & information from related disciplines & Vendors with safety, Maintainability & Operability aspects.

 Ensure that the design is safe, feasible from the points of view of fabrication, construction, installation, operation and maintenance, conforms to agreed codes and practices and meets all the requirements of the project design basis and specification.

 Preparation of material for Piping/Pipeline Handling Meetings with the Client, other project groups or outside companies working on the project as required.



View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 2562)

Go to Search Parameters...

Brief Description

Versatile, knowledgeable, exploration geologist

I have over 20 years experience in drilling and drill management. I have worked in remote and arduous environments and have always been commended by my employers. I have a wide range of drilling experience including coring, rotary percussion, rc etc.

Field Engineer / Estimator / Senior Piping Designer / Squad Lead-Checker

With excellent communication and coordination skills, I have the ability to lead a team to success and deliver projects in the given time frame. I am confident that my positive approach towards my work will benefit the organisation. My strength lies in my hardworking nature, sincerity and the willin

To work in an organization which gives me ample opportunities to learn and grow with the organization

Provide technical consultation relative to physical and mechanical means of protecting potable water systems against contamination due to backflow of non-potable substances, including recycled-reclaimed water.

Geology MSc Graduate (Minor in Botany) seeking to establish a career that focuses on environmental concerns. Am willing to relocate anywhere around the globe

I am environmental engineer. I am searching for a good job related to environmental engineering.

Scaffolding & Safety

Geological engineering

Well-rounded professional office/field experience in project controls, process engineering, environmental engineering, construction, management, sales, and business consulting. Industries: oil and gas, federal government contracting, residential construction.

Former Australia SF; SAS Regt. 19 yrs int'l experience, 3 yrs Regional Manager China & Sth EA. Strategic planner drawing on yrs in difficult & demanding environments.

Mining, Geotechnical and Environment professional

Highly qualified Project Management Professional offering more than 20 years of project and construction management experience in managing and administering complex engineering and construction projects. Results focused and effectual leader with proven ability to set up project management systems

I graduated with a B.S. Degree in Environmental Science from Antioch College. I completed internships in Oregon, Brazil, India, and Ohio. I also worked for a landscaping company where I learned skills such as Spanish Language, Planting, Floral Maintenance, and Bed Preparation.

Environment, Health and Safety Management expertise, ranging across industry sectors. Five years of experience in executing both technical and management related projects.

Logistics and Procurement Specialist

Experienced mechanical engineer with 5+ years of practice in designing and improving mechanical systems, obtaining product certifications and troubleshooting assembly line and field issues

Electrical Foreman / Service Technician

Excellent customer service skills and telephone etiquette

I was completed b.sc. in chemistry and also completed diploma in industrial fire and safety.Iam having 7 years 6 months experience as a safety officer.In this experience 5 years in Indian and 2 yaer 6 months gulf countries.

GRADUATED WITH MBBS DEGREE (FIRST DIVISION) FROM SSR MEDICAL COLLEGE,UNIVERSITY OF MAURITIUS,IN 2005,COMPLETED INTERNSHIP FROM St STEPHENS HOSPITAL,NEW DELHI,PRESENTLY WORKING AS A MEDICAL OFFICER WITH HIMACHAL PRADESH STATE GOVT.

I completed my Masters programme in Sustainable Chemical Engineering (with distinction) at Newcastle University, UK in September 2008

A+, Computer Engineer

12 year U.S.Air Froce NDT TECH

(Always Speak Truth) With 18 years of experience as an audit, accounting and finance professional, I intend to build upon my expertise in internal audit of a reputed concern and only willing to serve and settle permanently in MADINA TUL MUNWWARA, Kingdom of Saudi Arabia

To obtain a challenging job where I can utilize my experience and skills to add value to the company. •Electrical engineer with over 18 years of hands-on experience.

Master sailing on tankers looking for shore based job

Comprehensive international leadership in Environmental, Health, Safety and Sustainability. Extensive experience in Asia with top multinational firms. Excellent cross-cultural skills in Indonesia, Singapore, Malaysia, Thailand, Philippines and China. Speaks Bahasa Indonesia conversationally.

Bachelor's in electronics and communication and I am a naturalist

Experience in erection and commissioning of water treatment plants of auto and semi auto type. Specially USP 27 grade water.

Over 12 years of Mineral exploration geology: Soil geochemistry,Base metals, Diamonds and Precious Group Minerals in different geological settings. Many years of Project management in remote areas supervising diverse exploration teams. Skilled in Geosoft, Oasis Montaj, ArcGIS and MapInfo softwares.

OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT) Pharmaceutical, STP

5 years experience in alumina industry as safety, environmental and also process senior engineer

i was in dubai for past 25 years and i moved to australia with my family on peramanent resident visa last year july.

I am Chartered Accountant and working with Al Khafji Joint Operations (Saudi Aramco Gulf Operations and Kuwait Gulf Oil Company) as Financial Analyst

Repair and mentainance in Automotive industry.

Heavy Equipment operator/ Supervisor ready for a new challange

1 yr exp in production of tannic acid, there i used hplc, spray dryer, boiler, extracter, condenser

I am a Mechanical design engineer. I am efficient in Proe, AutoCAD

Environmental Consultant, 2 years experience in site investigations soil and water sampling. Development of site specific risk assessments. Site supervisor on numerous remediation projects.

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

I currently hold over 18 years of government contracting experience including purchasing commodities, service contracts, repair, maintenance agreements and construction contracts via oral solicitation, request for bid (overseas), sealed bidding, and negotiated agreements.

Well-traveled, young and professionally experienced field geologist. Experience working closely with environmental geologist consultants during pre-feasibility exploration project. International experience with fluency in spanish. Willing to put in long days and learn new and challenging duties.

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

RoboHELP, Adobe PageMaker, MS FrontPage, MS Word, Adobe Acrobat, Adobe Photoshop, Corel Draw, TechSmith Snagit, MS Visio, MSTP

Civil/Survey CAD Designer/Drafter with 8 years AutoCAD experience willing to relocate to Nevada, western states, or Mexico

I am moving to London in July of 2003. I am very passionate about being involved within the London environmental industry. I possess two years of management experience within an environmental software company. When I hold a job, I devote myself entirely to my profession.

Purchasing Agent / Buyer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out