Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82749 next resume »»
CONTACT INFORMATION:
View contact information...

Position of Equipment Operator or Foreman

PERSONAL:
Capable of supervising, managing and motivating workers
Ability to handle multiple projects
Experience in unique civil projects
Highly motivated and self starter.
Willing to learn new ideas

EXPERIENCE:
Triple Transfer Driver 2007-current
AB Construction, Doyle, Ca
Delivering aggregate material to clients in Western Nevada. Took position due to lack of work in the Reno area for construction.

Mass Excavation Foreman, 2005-2007
Atlas Contractors, Inc. Sparks, Nv
Constructed subdivisions and commercial sites. Onsite supervisor. Usually supervised 3-20 employees depending on project needs. Estimated production schedules for mass excavation for dozer/scraper operations. I did rough and finish grading for house and building pads, streets, sidewalk, curbs and slopes. Set grades for slopes, swales, streets, channels, curb and gutters, and sidewalks. Operated finish blade majority of the time as a working foreman. Operated all other machines when needed. Instructed toolbox safety meetings daily, and major issue safety meetings on Thursdays. Worked closely with Grading Superintendent, Underground Utility Superintendent and Foremans, Paving Superintendents and Foremans, Project Owners, and government inspectors, to insure all aspects of the project were on track and on time.
Operator/Laborer Foreman 2004-2005
The Ryan Company, Tauton, Mass.
Worked on a new waste water treatment plant as a backhoe operator. Promoted to Operator/Laborer foreman by Structures Superintendent. Led excavations on all buildings and piping within the new Sewer Treatment Plant. Very enviromentally sensitive area of San Luis Obispo, Ca. I spent 8 months there, but talks of possible company closure by parent company Quanta, made me decide to return to Reno.

Grading Foreman-2002-2004
Peavine Construction
Worked only in the private sector on one very large master planned community and one storage facility. Supervised 5-15 operators. Used Trimble GPS to set up most of the subdivisions, used GPS and lasers to finish lots, handheld and machine controlled. Most decisions were made by Grading Superintendent, I just followed instructions.

Mass Excavation Foreman, 2000-2002
CBK, Inc. Las Vegas, Nv
Was a full charge foreman. I managed up to eight projects at one time. Setting up project, lay-out, organizing crew, ordering machines, and all paper work.We did private work such as subdivisions and commercial projects, and high rise ground work excavations. In the public sector were various new schools and additions to two college campuses. Little to no supervision from Superintendent, or company owner. Spent time in the field, as well as in the office. Internal problems caused to company to close its' doors.

From 1997-2002 I worked for various union shop companies mostly in the Las Vegas area. Some as a foreman others as an operator. I spent four months in 1997 on a flood project in Walker Canyon, Walker California. Excavating 10 feet below river bottom, and building new river path, that was destroyed by the flood, installing various size rip rap. I have experience working on airport projects grading, installing new lighting (piping only), with swales, and numerous grade breaks, using laser and GPS, to lay base with a paver for a tarmac, and finish grading it with the TopCon 3D Macine Control laser system to grade within -.02 of finish product..

EQUIPMENT EXPERIENCE
DOZERS- All Cat D3-D-11R, Komatsu,. John Deere, Dresser, Fiat Allis
LOADERS- All types and sizes to Cat 990, John Deere, Kawasaki, Komatsu; grading, backfiliing, loadiing trucks.
BLADES- Cat 12-16H, John Deere 772, Volvo, Dresser
EXCAVATORS- Cat 301.5 to 385L, John Deere to 850, Komatsu to 95z to 450, Hitachi 220 to 1800 with 9 yd bucket loading 777 haul trucks
OTHERS- Rubber-tired backhoes, compactors large and small, rollers static and vibratory, scapers; paddle-wheels, conventional and twin engine.
I have 25 years of experience in civil construction. I have worked on major highways, steep terrain, tight access, commercial, heavy industrial and residential projects, both public and private sector. Like to be faced with challenges. I know how to move dirt, and take moving it seriously. I can read and interpret plans, and can set grade. I have no tolerance for sloppy work. I am both old and new school able.

EDUCATION:
Lee Vining High School
Lee Vining Ca.
Graduated in 1983 and began my construction career
I do have experience with Trimble and TopCon GPS handheld and on machines, and TopCon 3DMC system.

ABOUT ME
I was born and raised in Lee Vining Cal. Left in 1983 to pursue a career in construction.
I am married with five children and two step children. Grandpa of two. Three of the five are out on their own.. I am no longer affiliated with any union. I am currently driving a triple transfer dump truck for a friend since construction is slow here in Reno. I believe that being punctual, getting to work is priority, and safety is mandatory at all times. I have a great work ethic. I like to be prompt, and expect others I work with to be. I do not use any form of illegal drugs, nor do I ever come to work hungover or drunk, and when in a supervisory position, I send those home that do. I adhere to company policy and safety regulations. I take these very seriously. I am willing to travel as the projects change.

ADDITIONAL INFORMATION

I have nearly 25 years of experience in grading and underground utility construction. I have operated all sizes of excavators from mini's to an Hitachi 1800. Loaders of all sizes. Dozers D3 to D11R. Cat, John Deere, and Volvo blades. Most brands of rubber-tired backhoes. Scrapers; paddlewheel, conventional and twins. Multi-terrain and skid steer tractors. I have worked on house pads to super arterials, city streets, commercial sites, industrial power plants, water and waste water treatment plants, bridges and specialty jobs. I can read and interpret plans, and set grade. I have installed water lines, class 150 and C900, and ductile to 48 inch. Sewer to 60 inch, and storm drain from 8 inch plastic to 144 inch multi plate culvert, and 10' x10' triple box, pour in place and pre-cast concrete. I have finished slopes with dozers, blades and excavators. I have ran excavator/haul truck operations, and worked with drilling/blasting operations. I also have experience in sand and gravel/crushing operations.
I have 10 years experience of being a supervisor, and expect attention to detail. I have worked numerous types of project applications and used many different styles to complete a task. I am willing to travel if project calls for it. I consider myself an expert in this field.
This is only a basic overview of my experience in this field. I have tried not to limit myself in all aspects of heavy construction. If you need more information or have any questions please call.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 951 to 1000 of 2526)Go to Search Parameters...
Brief Description
Radiation Safety Officer, Certified Health Physicist, Environmental Manager
Contracts - Construction Specialist with international and north american experience.
Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.
Experienced in fast paced environments. Recognized for exceptional problem solving and motivational skills. Hold high standards and believe that profitability, customer service and quality work are primary factors of success in any competitive industry.
Am a post graduate degree holder in the field of hospital administration, with 3 years of working exp. in a multi speciality hospital in south kerala, seeking for suitable post in the same field.
I recently graduated from the University of Minnesota with a B.S. in Geology. I have little experience, but I did work as a research assistant for a professor, Dr. Christian Tessier and have done six weeks of field work.
A qualified chemical/environmental engineer looking for a challenging position in the field environmental reporting, pollution control or alternative energy.
MSc in Environmental Engineering from University of Nottingham, UK
Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.
Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries
Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.
Experienced hydrogeologist and groundwater modeler with PHD from USA and work experience in USA, Europe, and the Middle East
MCA with 2+ years exp in IT field and I have 4+ years exp in medical whole sale
I am Arunraj, N.S., completed PhD at Indian Institute of Technology Kharagpur, India. My doctoral dissertation is entitled “Modeling risk and Risk Based Maintenance (RBM) in Chemical Industry”.
Masersdegree in Env. Geology, thesis in groundwater contamination, 3 yrs total of environmental consulting type work
I have a B.Sc. (Hons) in Geology from Carleton University, and diplomas as a Mineral Engineering Technologist and as a Geological Technician from Sir Sanford Fleming School of Natural Resources. I am currently seeking full time employment within the Environmental/Earth Sciences sectors.
Recent college graduate seeks to apply practical and formal training in mechanical engineering to begin career in design, manufacturing, technical sales, or training.
Environmental/Civil Engineering; Consulting, Regulatory and Research experience with a focus on Water Resources and Remediation.
Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing
Recent graduate with doctoral degree in biological oceanography (hydrocarbon pollution in marine sediment environment) seeking position in environmental consulting.
Objective: An entry-level environmental position, with projects in water quality, asbestos remediation, fate-transport analysis, and similar geohydrology issues.
Geoarchaeologist looking for 1 year experience in any geo- or archy-related field
Chemist, Research Chemist, Analytical ChemistCtechnical support
I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.
I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.
Chartered Electrical Engineer and Member of the Institution of Engineering & Technology (IET).
PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.
Expertise in Environmental Monitoring, Compliance and Assessment issues.
• Having two years of experience in engineering consultancy. Have a vision to quickly identify and understand the business benefits of new technologies. • Strong computational, analytical problem solving, and design skills.
I am civil engineer, Msc with 2 years of experience. My topics are hydrology and groundwater modeling. Excelent knowledge in GIS, Excel, Word, Visual Basic, Matlab, Photoshop and Dreamweaver.
Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.
Physical oceanographer with two year experience
Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. 1.5 years experience in Business Development in Latin America / working for survey company offshore in North Sea.
Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.
LSIT, US Citizen, Willing to relocate
HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection
Environmental Health & Safety
I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.
Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)
Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues
Senior-level Turbine Specialist/Technician eager to contribute comprehensive mechanical acumen as well as dynamic supervisory, safety management, and troubleshooting talents toward actively supporting a progressive organization in optimizing results.
I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.
I'm seeking a position that offers challenges and opportunities that complimens my 23 years experience as a remote site paramedic.
Mechanical Engineer with five years extensive expereience in the field of maintenance for a process plants and a hard core production plant.
I have done Masters in Environment Sciences. I have 2 years of experience. I am doing Certificate in GIS programm in Hunter College, City University of NEWYORK.
MS Chemical Engineer With R&D Experience
Overall 3.8 years of IT exp. & nearly 2 years of Non-IT exp. Hands on experience as a Sales Executive with more than 1 year and more than 2.4 years experience as product specialist. Proposal writing, customer specific demo preparation, lead generation, marketing activities
Environmental Engineer, M.S., E.I.T. (Water and Wastewater)
Chemical Engineering graduate with extensive experience in silicate manufacturing, pulp&paper manufacturing and design of wastewater treatment facility components with strong interpersonal skills
Born 20th September 1974
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   [ 20 ]   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com