Resume - OHST - Health, Safety & Environmental

Misco Jobs

Resume #83805

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
ƒæ Computer proficient; primary, Microsoft, Word, Power Point, secondary, Access, Excel, FrontPage, & Publisher.
ƒæ Technical Writing: Procedures, Site Specific Safety and Health plans.
ƒæ OSHA Requirements, Taught - Hazmat, Haz-Com, First Aid, CPR, Chemistry of Fire, Forklift, Aerial and Scissor lift, Excavations, Drug free Workplace, NFPA 70E, to mention a few.
ƒæ Taught Industrial Fire Fighting, University of TA&M and Reno Nevada, Incident Command and trained in Dealing with the Media.
ƒæ All Health and Safety aspects to some level or degree. Knowledgeable in OSHA CFR 1910 and 1926. Knowledgeable in Cal-OSHA and TOSHA.
ƒæ Industrial Hygiene requirements, monitoring and testing.
ƒæ Certified Occupational Health and Safety Technologist (OHST) through the Board of certified Safety Professionals and Board of Industrial Hygienist.
ƒæ Have Transportation Worker Identification Credential (TWIC).
ƒæ Have Tennessee Valley Training Center (TVTC) Reciprocal Courses, 20 basic plus ref.
ƒæ Long Beach City Collage - Teaching Credentials, Vocational Education for the Adult Learner.
ƒæ Have been a certified Emergency Medical Tech. (EMT).
------------

OBJECTIVE:
------------
Obtain a position where my years of experience, training, teaching, and communication skills will be fully utilized, thus saving company's dollars through continuing, developing and/or implementing an effective safety culture/program.
ALL ACCIDENTS CAN BE PREVENTED.
------------

WORK EXPERIENCE:
------------
ƒæ Grinder Haizlip at Valero Refinery, Memphis 4/23/2009 to 5/22/2009
o Safety Observations on the job sites / audits / reports.

ƒæ Pearson Safety Services (PSS), 2/2006 to 4/2009
o Safety Consultant/Professional.
„X Construction Job site inspections for PSS retainer clients in TN, MS, LA, AL, FL & TX:
* Training - all required OSHA and client specific, - classroom and on the job site.
* Assist clients develop Safety Programs/Culture
* Reports:
o Full reports of inspection findings with photos:
„X Positive findings and findings of recommended/suggested corrections.
o Accident investigations, full report w/photos.
o Loss Control and documentation.
o Site Specific Programs.
o PSS assignment: 3/2009 to 4/2009
„X Washington Group International
* Lagoon Creek III construction Power Plant Project for TVA
* Safety field observations with documentation.
* Daily and weekly reports.
* Excavations and craft crews Job Planning Safety Analysis (JPSA) audits.
o PSS assignment: 5/2008 to 10/2008
„X Glaxo Smith and Kline (GSK)
* Safety Observations during the Lopez Construction Project.
* Daily reports to GSK Environmental Safety and Health.
* Presented Contractor GSK Site Specific training to all contractors entering GSK to do work.
* Presented PSS Safety Orientation System o PSS special assignment:
„X Pixely California, April 2007 / 2008
„X One year under contract with PSS, building an Ethanol Plant from ground up for LURGI construction, managing all Safety aspects of contractors and sub-contractors.
* Developed Site Specific Safety Program for Lurgi, Pixley location;
o Program implementation.
o Daily Contractor Safety Orientations o Site audits.
o Safety Tool Box Talks.
o Review Contractors Safety Programs.
o Weekly Safety Statics and Performance, report out to Pixley LURGI Project Manager and to LURGI head office Safety, Memphis, TN.
o PSS local assignments: Job site inspections for PSS retainer clients in TN, MS, LA, AL, FL & TX, 5/2006 to 4/2007

o Grinder Haizlip at Valero Refinery Memphis, Shutdown/Outage 02/2006 to 4/2006 as Night Safety Monitor, 12hrs per day 7 days a week for 8 weeks.
o Please see PSS profile at; http://www.pearsonsafety.com/profile_flake.htm

ƒæ Shell Oil Co. from 3/1970 to 12/1999.
o Operations from 3/1970 to 11/1978.
* Catalytic Cracking.
* Alkylation.
* Hydro Processing.
* Distilling unit -3.
* Butane Isomerization.
* Solvents.
o Safety Inspector 11/1978 to 11/1980.
„X Covered all aspects of field work.
* Permits: write, review, audit o Safe Work Permits o Hot Work Permits o Confined Space Permits o Excavation Permits o Crane Critical Lift Permits o Live Electrical Permits
* Safety area Audits of all units with documentation to department managers.
* Did Training for employees on all safety equipment, procedures, practices, etc.
o Senior Safety Inspector 11/1980 to 12/1999
„X Continued safety inspector practices above, plus
* Code research and development.
* Write, review, and updated Company Safety Procedures.
* Haz-Mat team member and instructor.
* Lead fire brigade monthly field training.
* 2 to 3 times a year hosted fire team employees and Los Angeles county Fire Department to Texas A&M and/or University of Nevada Reno fire schools for one week training hands on live Industrial Fire Fighting.
„X Assigned to Industrial Hygienist (IH) off and on for approximately 5 years during career.
* Wrote IH and/or updated procedures.
* All aspects of IH exposure testing:
o Asbestos o Ventilation o Chemical o Hearing, sound level surveys, etc.
„X Worked in Major Projects (New Construction and modernizing existing plants).
* Catalytic Plant CCU, from ground up.
* DU-5 modernization.
* Hydrogen and Sulfur Plant, from ground up.
* Worked directly with construction contractors at all levels.
* Daily and weekly reports to senior management on all safety aspects.

ƒæ United States Air Force 8/1965 to 2/1969.
o First Air Commando Wing, England, Air Force Base (AFB), Alexandra LA.
„X Aircraft Maintenance.
* Crew Chief B-26
* Ferried B-26's to Nakhon Pathom Thailand to guard the Ho Chi Minh Trail.
„X One year in Vietnam. 8 / 1967 / 1968 at Bien Hoa Air Base Aircraft Maintenance.
o Returned and stationed at Castle AFB, Merced, CA
„X Worked in Fuels until Honorable discharge in 1969.

ƒæ Family overview may be viewed at: http://www.billyflake.com
------------

EDUCATION & CERTIFICATION:
------------
ƒæ High School, Memphis Tech.
ƒæ Long Beach City College - Certificate Industrial Fire Fighting & Hazardous Materials.
ƒæ Long Beach City Collage - Teaching Credentials, Vocational Education for the Adult Learner.
ƒæ Certified Occupational Health and Safety Technologist (COHST) through the Board of Certified Safety Professionals (BCSP)
------------

ADDITIONAL INFORMATION:
------------
ƒæ Certified Occupational Health and Safety Technologist (OHST)
ƒæ Retired member American society of Safety Engineers (ASSE)
ƒæ Retired member of National Fire Prevention Association (NFPA)

REFERENCES:

* References are available Upon Request.

Note: Willing to travel for opportunities from 8 weeks to 2 years.
citizenship, etc.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 2566)

Go to Search Parameters...

Brief Description

PhD in geochemistry, experience in trace and major elements, radiogenic Isotopes (Sr-Nd-Rb-Sm-Pb-Hf) and U-series isotopes. My research focused on the application of short-lived, U-series isotopic disequilibria to constrain, the time scales of magma formation, transport and differentiation.

B Tech Polymer Engineer, MBA - Financial Management, 3 years experience as Quality controller and 1 year as Accounts Assistant

Diploma Engineer in Petroleum as well as Industrial Safety, possessing good experience in Oil and Gas, HSE Management, Offshore Construction, Fire Fighting, First Aid, MS Office, Driving, Good English, Worked with Multi National Workforce, Emergency Evacuation, HSE Induction, Safety Training, etc.

Strong Experience in the area of Safety (Health, Safety & Environment). Coordinating with other construction departments on HSE related issues. Consistent performance with ability to take up responsibility and deliver results.

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

Good communication skills and excellent goals getter. A graduate of Applied Geophysics with hons, from O.A.U, Ife, Osun State, Nigeria. My career objective is to obtain a challenging position in a well structured organization that lays emphasis on excellence, goals achievement and self development.

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Chemical Process Engineer

I have got 19 years experince in pumps and valves .

Possess excellent interpersonal skills and organization skills;• Able to adapt and work within a dynamic environment;,Willing to work under pressure

Proven ability to provide Industry initiative and leadership. 20 years of experience with all aspects of integrated instrumentation, software design, project management, and installation of projects. Projects of various magnitudes ranging from board level to major industrial development.

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

OHST - Health, Safety & Environmental - HSE

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

Facilities Management, Procurement Specialist, Proficient in MicroSoft Office Suite

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Almost twelve (12) years of experience as a Lead Document Handler with Solid Professional involvement in the Document Management System of Various Major Projects on JGC Philippines, Inc., namely Oil Wharf Expansion Project in Caltex Batangas, BAPCO Kero Merox PJ, K2U ,one of the

Dear Sir / Madam,

Cartographer for oil and gas

Field Service Engineer

I’m a graduated of Diploma in Civil Engineering from Universiti Teknologi MARA on DECEMBER 2005. But now i am still studying and will finish my degree in civil engineering in December 2009. I have taken the courses that related and appropriate to the program during my learning years in UiTM such as

During my university and professional work, I acquired a solid experience in the field of the program coordination, the logistics and the financial management.

Working as a safety officer in petrochemical company with 5.5 years of experience .

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Getting ou of the wood industries, use to work long hours alone, I'm really independant and i don't need suppervision, i'm able to solve any problem that can show up to me

writing, editing, strategizing, brainstorming, problem-solving, organizing, hitting deadlines, trend spotting, managing, negotiating, educating, training, communicating, developing new products and services, reshaping message

Project Engineer experienced in report writing, proposal prep, health and safety audits, process hazard analysis, budget maintenance, field crew management, client relations and preparation of P&IDs

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Mechanical Engineer with 5+ years experiance in Water treatment,Desalination,RO Projects and Costruction industry

Dear Sir,

A successful Researcher and Extension Professional in Sustainable Agriculture & Horticulture and to improve their quality of life farmers through the application of educational and research-based information focused on critical issues and needs.

Construction / mining / environmental

Skilled welder with 10 years experience. Able to weld mig, arc, flux core. Have used manual, semi-automatic, automatic and portable welding machines. Also albe to operate heavy equipment.

Audit, Budgeting, Purchase, MIS, Costing, Pricing, Windows, Excell, Lotus, Internet, Fidelio, Micros, SAP, Scala

Chemical engineering background with site experience including site engineering, commissioning, performance testing, and construction.

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

8 yrs of exp as mechanical engineer

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

Area of expertise includes: Office Management, Project/Staff Management, Training and Development, Budget Management, Procurement Management, Planning and Execution Skills, Secretaria/Confidential Services, Document Management, Coordination/liason, Team Building & Team Management, Logistics and Tran

I am a seasoned American Registered Professional Civil Engineer with a record of repeated success on diverse Administration & Management career experiences through out the United States, Central America, and the Middle East.

20 + Years Experience / Supervisor / Heavy Equipment / Haul Trucks / Will Relocate

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

I have implemented and maintained 7 ISO 9000:2000 Quality Management Systems for several leading companies.

I am an Environmental and Chemical Engineer, working in an oil and gas sector as an EIA specialist at Kuwait

I am a graduate metallurgical engineer with experience in melting of steel and cast iron. I have also worked as a corrosion engineer.

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I can work with any environment

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out