Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #85163 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE

To continue a career in the field of environmental regulatory compliance.

EDUCATION
University of Nebraska
Bachelor of Science in Natural Resources (Minor in Biology)

University of Denver
Masters in Environmental Policy and Management

QUALIFICATIONS

Over 9 years of working with and for regulatory agencies including the State of Colorado, Department of Public Health and the Environment-Water Quality Control Division (WQCD), Environmental Protection Agency, Colorado Oil and Gas Conservation Commission (COGCC), Colorado State Engineers Office (SEO), and local governmental agencies. With a strong background through both education and work experience with the Clean Water Act (CWA), National Pollutant Discharge Elimination System (NPDES), and Resource Conservation and Recovery Act (RCRA). Knowledge of all aspects of permitting including discharges from domestic, industrial and stormwater sources to surface water and groundwater.

Over 8 years experience in analytical chemistry in both the field and laboratory setting. A broad range of classical and instrumental techniques. Designed and implemented a variety of sample collection and preparation methods (extractions, tube furnace development, and fiberglass recoveries). Extensive use of laboratory and field monitoring equipment (for example: Hach®: chlorine, nitrite/nitrate, pH, turbidity, COD, BOD, and specific conductivity tests; Orion® 901 Microprocessor Ionalyzer, centrifuge, muffle furnace, calipers Rotovapor®, midi-distillation apparatus for cyanide extractions, etc.). Common knowledge of basic wet chemistry related to all aspects of analytical chemistry.

Over 3 years experience in materials development and engineering in the rubber industry. Knowledge of most aspects in materials and process development in a manufacturing setting. Design of experiments and statistical analysis used readily to reach a solution to a problem most efficiently. FEMA used for primarily to determine direction of projects. Project management required for all aspects of current position.

Ability to supervise lower level staff, place orders, and service various projects. Motivated through a goal and team oriented setting.

Relevant Skills:
* Job safety analysis performed for University of Denver Graduate Capstone Project
* Certified "D" Water and Wastewater for State of Colorado –October 1999
* Internal Auditor Certification for ISO 9001, November 1996
* 40 Hour OSHA Hazwoper Certification, July 1995 (8 hour refresher March 2006)
* Air sampling for formaldehyde, phenol, and ammonia using various techniques
* Calibration and maintenance of laboratory instruments and equipment
* Field sampling for air, soil and water
* Chromatography - GC/MS, HPLC, GC, and IC
* X-ray diffraction (XRD) and polarized light microscopy
* Atomic absorption- Flame, Cold vapor, and Graphite Furnace Spectrophotometers
* Total organic halides (TOX), Digital Scanning Colorimeter (DSC)
* Thermal Gravimetric Analyzer (TGA), Dynamic Mechanical Thermal Analyzer (DMTA)
* Software: Microsoft PowerPoint, Access, Word, Excel and Project

PROFESSIONAL EXPERIENCE

Regulatory Compliance Specialist 2008-Present
Denver, CO
Provided consultation for oil and gas industry for regulatory approvals under local, state, and federal statutes. These included discharge assessments for water quality permits, stormwater management plans (SWMP) and inspections, spill prevention control and countermeasures containment (SPCC), material containment plans, and hazardous waste management plans. Local permitting included pipeline development, special use, conditional use, building, and grading permits. (URS Washington Division)

Regulatory Compliance Specialist/Hydrologist 2006-2007
Denver, CO
This position provided consultation to mining and oil and gas industries, which included interpretation of laws and regulations under EPA or state equivalent programs. These included the CWA, Underground Injection Control (under Safe Drinking Water Act), Surface Mine Compliance and Reclamation Act (SMCRA), Comprehensive Environmental Recovery and Compliance Liability Act (CERCLA), and RCRA. Supported these companies during Water Quality Control Commission rulemaking hearings where data was presented showing attainment of certain water quality standards.

Performed groundwater sampling at CERCLA site on NPL in Yerington Nevada using EPA assigned protocols. Researched coal combustion byproduct regulations for major surface coal mine in New Mexico and provided necessary consultation to client for expansion and enhancement of mine. Consulted to only operating cyanide leachate gold mining facility in Colorado for the expansion and enhancement of their valley leach facility and overburden storage areas.

Applied for and obtained a Class V UIC permit for disposal of oil waste byproducts in Montana through Region 8 EPA. This included assessing the area of review of existing and abandoned wells, stratigraphy, closest sources of underground sources of drinking water ("USDWs"), and local aquifers (confined and unconfined). (Norwest Applied Hydrology)

Environmental Protection Specialist II 2000-2006
Denver, CO
Permit writer for the Water Quality Control Division with duties including writing discharge elimination permits for industrial and domestic permits (surface and groundwater discharges). This included water quality assessments, review of compliance history, newly promulgated water quality standards, use attainability analyses, water effects ratios, recalculation procedures, etc. Outreach and assistance included presentations to special interest groups representing industrial groups such as sand and gravel, construction, mining, oil and gas, power washing, and other public and private entities who need guidance under Colorado's CWA. A strong understanding of the Effluent Limit Guidelines ("ELGs") for categorical industries including bituminous coal, metallic and non-metallic mining, coal fired power generation, onshore oil exploration and production, oil refining (Suncor®), and beer production (MillerCoors®). General permits included construction dewatering, Minimal Industrial Discharges ("MINDi"), sand and gravel, domestic discharges to use protected streams, domestic discharges with 100:1 dilution, individual sewage discharges systems (ISDS), reclaimed coal mining discharges, and groundwater remediation permits (with a coordinated effort under CERCLA and RCRA programs through Hazardous Waste Management Division). (Colorado Department of Public Health and the Environment, Water Quality Control Division)

Materials Development Engineer 1996-2000
Denver, Colorado
Materials development for Power Transmission Division includes compounding polymers used for V/Micro-V belts, analyzed data from testing labs and draw conclusions based upon both physical and chemical analysis. Use of Design of Experiments (Design Expert 5.0 by Stat-Ease) program to develop experiments and Weibull® statistical program to determine distribution of data. Understanding of all aspects of ingredients that go into polymerization of thermosets (vulcanized rubber). Processing techniques were utilized to determine applicability of product, this included milling, calandering, mixing, and curing of product sample. (The Gates Rubber Company)

Chemist 1995-1996
Littleton, Colorado
Researching of various phenol/formaldehyde resins using analytical tools and air sampling devices. Purpose for study was to monitor and improve current fiberglass binders, and reduce hazardous chemical emissions (Johns-Manville, Incorporated)

Lab Technician/Customer Service 1994-1995
Denver, Colorado
Responsible for all aspects of inorganic lab, including: wet chemistry, ion chromatography, acid digestions for GFAA, ICP, CVAA, etc. Field sampling included: HACCP (sanitation analysis), water, wastewater, air, and soil. Protocols for EPA, CDHPE, as well as other regulatory agencies applied. Responded to incoming requests by customers about current or future business relations that deal with the services of the lab. (The Industrial Laboratories, Incorporated)

Chemist 1993-1994
Golden, Colorado
Laboratory work involved radiochemistry and inorganic analysis of both soil and water. Basic wet chemistry was utilized, as well as total organic halides, CVAA, isotopic uranium, and isotopic thorium analysis. (Barringer Laboratories, Incorporated)

Soil Scientist 1990-1992
Lincoln, Nebraska
Performed mineralogical analysis on crystalline and amorphous soils sampled throughout United States at the National Soil Survey Laboratory. This involved the counting of coarse grained soils using a polarized light microscope, x-ray diffraction for clays and fine silts, and ICP, DSC, and TGA for various chemical breakdowns resulting in overall characterization of soil. Local field sampling of soil profiles was performed on routine basis for demonstrations of sampling techniques to employees. (Natural Resource Soil Conservation Service, Department of Agriculture)

REFERENCES

Excellent professional references are available upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 2562)Go to Search Parameters...
Brief Description
Free! Project Manager with established record of successfully completing large-scale drilling programs. Proficient in prioritizing and directing complicated logistical operations, synthesizing abundant data, and optimizing mineral resource potential.
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
A qualified geologist with an exceptional track record in sedimentology, mineralogy, geochemistry of non- clastic sediments and open cut mines of non – metallic ores
Strong in project design and supervision.
My career encompasses over 25 years of professional experience as a project manager and supervisory scientist working in diversified environmental policy and regulatory evaluation, international fisheries and forestry management, and the effects of environmental change on landscapes and freshwater a
Analytical Chemist, Environment, food, pharmaceutical quality control, research
I have experience and skills in the following areas: Production Management, Quality Engineering, Project Management, and Purchasing
20 years of proven success effectively managing maintenance, manufacturing, and production departments
I am an experienced EIA and environmental management consultant with experience in mining, oil and gas and construction. I have worked in various countries (Kenya, PNG, Pakistan, Afghanistan, Botswana, Sri Lanka, & UK) & have been environment manager for construction of major dams in Laos & Egypt.
Environmental Regulatory Specialist
Designig water supply distribution,wastewater collection,water modelling,water and wastewater treatmenr,contract documentation and project management
25 years experience and Product knowledge
Experience in the area of Laws, Regulation & Compliance(Air, Waste Water, Hazardous Waste, Environment), Monitoring & Analysis(Air, Waste Water, Hazardous Waste, Environment), Pollution Control & Treatment
Software Development Manager
Accomplished presence in providing EHS decision support to Top Management through strategic planning for more than 16 years.
Working as Dy. Manager (Forestry) and associated with raw material storage management, procurement and Tissue Culture.
HSEQ Manager
www.jdlapinskas.com
Management System Auditing: Conducted internal audits for quality, safety, environment, HACCP and enzyme safety management systems. Project Management: Planned, executed, monitored and managed till successful completion, various large scale industrials projects, which involved engineering design,
Over 14 years of experience in the industry of Health, Safety & Environment (HSE),
HEALTH, SAFETY & ENVIRONMENT
QHSE and general vessel superintendent.
Projects and R&D in Water and Waste water Treatment - Industrial and Residential, Environmental Pollution Control, Corporate Social Responsibility, Additionality, Sustainability and Accountability in Natural Resorces Management
Renewable, Alternative, Energy Development including multiple Biofuels
A highly creative management system professional with more than Fifteen years of diverse experience in management systems like Quality Management Systems, Health and Safety Management Systems, Environmental Management Systems and Food Safety Management Systems
Water Treatment Sales
Over 13 years of experience in the field of Environmental Consulting – EIA’s SEA’s, Audit etc., Waste Management & Ecological studies
I am a Senior Environmental Project Manager (> 16 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.
24 years of experience as a Cartographer, I am expert at Topographic maps and Nautical charts. I have designed and created atlas and sheet maps. I operate AUTOCAD to digitize maps and covert manual maps to digital maps. I am known for quality work, productivity, and organization.
Responsible for entire Process monitoring, Trouble Shooting/ Rectification or modification for optimum Production in each section.
Bsc in Marine engineering - holder of Certificate of Competency, grade CHIEF ENGINEER STCW 95-diploma of ship superintendency(Lioyds). Working 5 years as ship tech superindent Prior accepting this job, I had 13 years of sailing experience in different ranks which includes 5 years as Chief engineer .
B.SC. HONS, APPLIED BIOLOGY
Experienced Banker
To work as an Instructor/Trainer/Lecturer in Teaching and Technical Fields wherein I can utilize my qualifications and experiences. I am confident of my own capabilities and I am always dedicated to improving my performance and techniques in educational fields.
I have over 20 years experience advising clients investing in all the main industrial sectors on how international ESG risks, perspectives and standards are translated, interpreted and implemented into their Asian operations.
Environmental monitoring
Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission
BE Mech. API-653/510/571 certified. 16+ years inspection experiance
An experienced Project Engineer - Designer - CAD Manager with very strong concepting /training/team building skills
Human factors, human performance, human error, ergonomics, industrial psychology
Water and wastewater Treatment Expert
Experienced Designer
20 years of power generation/desalination engineering expertise
Experience working in electrical and automation field
Electro-Mechanical Engineering Technician, with a demonstrated ability in Research and Development to extract of expandon new or existing corporate core technologies from concept to commercialization, in a variety of industries, including medical devices.
Quality System Manager
Wastewater and water engineer, experience on several process and equipment on water and wastewater technology. Currently working as a Senior Wastewater Engineer for one US CDM company in Jakarta. Very interesting to see if there is a new company willing to enter Indonesia as their Regional off.
I am an electrical engineer with 24 years experience 10 of which were in a power utility and 14 as an energy and environment consultant. My strengths are in energy planning, energy efficiency improvement and also in climate change.
Preliminary 35 hours PDU trained PMP with MBA in Telecom Management plus Bachelor in Engineering (Electronics & Telecommunication), A well established professional in the information technology sector with 10 years of project Program, delivery management expertise combined with multiple tasking, and
Being graduated in chemistry,I gained 17 yrs of exp in areas of operation,R&D.Process(control,validation),QC,material characterization, by using chemical& instrumental methods in cement ,Ores ,minerals,Ceramics &Refrac,Metals indls ,wishing to work with a team where I can utilize my full knowledge
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com