Resume - NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

Misco Jobs

Resume #87453

CONTACT INFORMATION:
View contact information...

Summary

Global Corrosion Engineer/Chemical/Mechanical consultant manager, with 30 years of broad quality oversight for major process capital equipment, field mechanical integrity reports, DOT chemical shipping classification, electrochemical analyses and R& D process engineering compatibility issues. Working knowledge of API, ASME, and NACE engineering codes. Well trained in leading failure investigations, extending the life of chemical processes, establishing new purchasing engineering standards and eliminating the effects of costly corrosive agents thereby improving processes and savings millions of dollars. Experienced in dealing with hundreds of different corrosive liquids and gases.

* Saved Hercules $ 6.7 MM over 3 years through improvements in materials handling, rotating equipment design, and dryer construction changes.

* Saved $ 32 MM over the last 10 years through projects this extended the life of capital equipment, eliminating costly field process failures, and by improving product quality for both Colgate Palmolive and Hercules.

* Certified by NACE International &CESB as a Corrosion Specialist, Materials Selection Design Specialist and Sr. Corrosion Technologist.

Professional Experience

Sr. Staff Engineer at Hercules Inc. July 2006 – July 31, 2009 (3 years 1 month)

* Saved $ 1.2 MM through the alteration of materials handling of cutter blades which eliminated compound fretting fatigue. This project reduced the chance of catastrophic failure of a cutters by practically 100%

* Conducted failure analysis of critical processing mixer leading to redesign by engineering vendor eliminating blade tip fatigue and process shutdowns saving $ 2.0 MM.

* Led international team in the investigation of two failed coiled serpentine heat exchanger dryers to determine the root cause of the failures. Dimensional modifications were made to one dryer while the other needed an upgrade in materials of construction and welding procedures at a cost savings of $ 2.5 MM.

* Extended the life of critical Kymene reactors to allow for continued operation without replacement saving $ 1.0 MM.

* Revised corporate engineering standards to bring them up to date including, FRP composite construction, Coatings and Linings as well as revision of welding methodology specifications.

* Managed corrosion lab studies and interpreted compatibility parameters for R&D and field engineers.

* Crafted materials engineering specifications for sales organization.

Sr. Engineer Colgate Palmolive Co. November 1984 – November 2004

* New formulated super fatted soap dryers developed pitting corrosion after 3 years of service. A failure analysis and several plant inspections were conducted. Recommended higher throughput velocities and materials of construction upgrade from 316 SS to Al6XN saving $ 2 MM.

* Spray detergent towers around the globe were experiencing pernicious internal corrosion Made several trips to South America to internally inspect the towers. The towers were experiencing condensation corrosion at the explosion door level mid way up. Made recommendations to shore up tower with new internal fillet welded carbon steel plate and additional insulation to prevent continued condensation corrosion saving over $ 5 MM worldwide.

* Inspection of Glycerin recovery evaporators in Brazil revealed stress corrosion cracking after 5 years of service requiring a change in material of construction. Recommendation was made to change metallurgy to 2205 duplex alloy. The evaporators were repaired with this alloy with no further corrosion issues around the globe saving $ 7 MM

* High Speed Rotary valves in abrasive toothpaste formulas were experiencing erosion pitting corrosion around the world. Made recommendation to machine new valve out of Nitronic 60 alloy. This resolved the erosion issue and eliminated the chance for metal contamination in toothpaste saving $ 2 MM worldwide.

* Resolved a Dual laminate FRP tank failed in hypochlorite service in Europe. Moved away from lined FRP to cross-linked HDPE saving $ 1 MM.

* Led a global team of packaging engineers and scientists in resolving critical Soft-soap Pump Springs crevice corrosion by testing and reformulation eliminating the issue with a worldwide saving to the business of $ 10 MM.

* Developed an eight-hour informative Corrosion course on engineering materials and chemistry. An overview of significant company corrosion issues and solutions was given. It included sections on materials selection, engineering design, corrosion testing and a how to checklist for plant corrosion inspections.

* Developed a Materials Engineering corrosion database that was used extensively by engineers and the manufacturing plants to select materials of construction for Colgate Palmolive co. saving $ 5 MM worldwide.

FMC- Metallurgical Corrosion Engineer 1981-1984

Failure analysis of machine parts and corrosion studies for FMC that included fractography, metalography, and corrosion testing. Work centered on aluminum alloy selection for the Army fighting vehicles including the Bradley.

EDUCATION/PROFESSIONAL DEVELOPMENT

Wayne State University, Detroit, Michigan. BS Material Science& Engineering, Chemistry Minor. Completed numerous ASM and NACE professional development courses. Completed UCLA extension course on Electrochemistry and uses for corrosion testing. Failure Analysis courses were taken and completed through the Society of Professional Advancement. Participated in NACE annual corrosion society meetings and section meetings for over 25 years while obtaining all NACE certifications.

OBJECTIVE:
------------
Looking for a varied assignment corrosion engineering job. Looking after mechanical integrity, corrosion control, failure analysis, chemical inhibition and monitoring, project engineering work.
------------

ADDITIONAL INFORMATION:
------------
U.S. citizen, enjoy golf, swimming, traveling, and reading.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 2566)

Go to Search Parameters...

Brief Description

I have about 12 years of Industry and ERP experience with 5+ years of extensive SAP FI/CO/PS. My experience in FI/CO and PS encompasses 9 projects. 3 of these projects were full life cycle implementations which went from Blue Printing to Realization and Go Live.

Engineering Degree, Industrial equipment sales to EPC contractors, Power, Oil/ Gas, Utilities, Tenders and RFQ , techno-commercial negotiation, Team Management, Strategic alliances

Travel process outsourcing

An experienced, ambitious, enthusiastic Operations/Program Manager (PM) who is self motivated, dedicated and organised. Works well as part of a team and individually, showing excellent inter-personal skills, has a proven track record of marketing, sales delivery and excellence and shows flexibility

To work for a company in the environmental field that allows professional and personal growth.

Ph.D. (Remote Sensing), specialization in digital terrain modeling (DTM). 10 years experience in application of DTM in environmental protection, soil science and structural geology.

15 Years Environmental Management (Program/Project/Personnel)experience. The past 5 years have been dedicated to the development, integration & deployment of enterprise-wide compliance management systems for two Major Oil companies and a large Healthcare/Educational Institution.

Utility Process Engineer

Working in different areas.

I have a Bachelor degree in Agriculture and irrigation sciences and some related experiences in some companies.I would love to work with more companies here and gain experiences.No matter what sort of job but related to water. Thanks

Water wastewater business development

Mechanical Engineering Graduate with seven (7) years experience in supervision of the operation and maintenance of furnace, compressors, cranes, pumps, boilers, expellers, oil heaters, water supply and water treatment. Four (4) years experience as Maintenance Supervisor in a 62-hectare Prawn Farm

outdoor field technician

12 years customer service as a technician.

GIS Consulting, Spatial database, image processing, natural resource management, remote sensing, AVL, GPS, spatial multimedia, ground water modelling, foundation engineering

To be employed directly by a Company that provides training, employment stability,. competitive compensation and Visible Rewards in Exchange for dedication, Commitment and Performance.

A detailed, oriented, dependable and organized individual with progressive responsibilities within the Environmental, Health and Safety Field with Hand- on Field and Laboratory Experiences. Resourceful in achieving tasks accurately, timely and neatly. Enjoys accepting and handling new challenges.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

Registered Professional Engineer with 13 years experience in mineral processing and extractive metallurgy. Holder of a B.S. in Metallurgical Engineering and a M.S. in Environmental Science.

Team oriented, love to work in highly motivated teams,Good communication skills ,In-depth understanding of special knowledge in the field of Applied catalysis of Physical chemistry,Skilled in using all kinds of experimental installation, good practical ability,Familiar with many softwares.

1. Site engineer, Hyperion Development Ltd. 2.Sub asst. Engineer,Public works department, 3. Jr. asst. manager,Power Grid Company of Bangladesh

MBA in hospital administration with 10 yrs experience

Skills in performing safety inspections and ensuring compliance with OSHA safety standards. Excellent ability to develop, implement, and enforce safety programs and protocols. Strong ability to gather data, compile information, and prepare reports.

More than 15 yrs of professional work experience as WATER RESOURCES ENGR/HYDROGEOLOGIST/WELL DRILLING SPECIALIST gained from four (4) local & with international affiliation consulting cos., mostly ISO 9001:2000 certified, & a gov't. agency from year 1988 to 2004 in the Philippines.

over 12 years in the HSE field. B.S. degree in environmental engineering, M.S. degre in Quality Assurance. Experience including hazardous materials (asbestos, lead, etc.) management, inspections, monitoring, report writing, compliance, and training. Attended many HSE workships and training.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

I am young and dynamic, with Bachelor and Master degree in computer science. If I get an opportunity to serve in your reputed organization

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

HVAC Field Service,BAS,DDC

Columbia MBA with Research and Journalism Background

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

ENVIRONMENT ENGINEER

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

ecologist with a background in zoology and specifically ornithology where the focus of his PhD research was on the impact on bird communities in general and gamebirds in particular and their response to various forms of agricultural practice.

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

Presently working as Finance Manager for a Swiss MNC in Bangalore. Over 14 years experience both in India and Middle east including E&Y audit firm covering areas of finance, accounting, Control, budget, financial reporting, system design and implementation.

Principal environmental skills with oil & gas experience in: - EMS and Integrated HSEMS - Hazard, Impact and Risk Assessment - Waste, Energy and Material Resources Management Systems - Auditing and Performance Analysis - Training and Awareness Development

HSE specialist with a chemical/ process engineering background seeking HSE or environmental role within the construction, oil/ gas industries. Based in UK but willing to relocate internationally.

20 years experience in EHS

I had successful career in Army and now voluntary retirement and working for MNCs in Bangalore, India. I have vast experience in Administration, Human relation management and facility management.

I am a qualified HSE Manager with experience in managing Health, Safety & Environment related to various types of EPC projects. I have worked in various types of projects namely Oil & gas, power plants, LNG plants, STP/ water treatment/RO plants, Pipelines, High rise construction, Highways etc.

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

MULTI SKILLED PLANT OPRATOR

I am a strong team player with proven experience contributing in cross-functional teams to fulfill corporate goals, who communicates well both verbally and in written form, who shares his ideas and knowledge with others, who develops excellent working relationships to his co-workers and customers.

Experienced in wind data analysis, wind flow modeling and loads calculation using softwares like Wind Pro, WAsP, WAsP Engineering, Wind Farmer and other supporting software¡¦s like AutoCAD, Map Source, Surfer and Global Mapper.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out