Resume - Experienced & Seasoned Engineer

Misco Jobs

Resume #88390

CONTACT INFORMATION:
View contact information...

PROFILE

Seasoned engineer with supplier development, project management, manufacturing, and design & development experience.

United States citizen & Canadian permanent resident.

PROFESSIONAL EXPERIENCE

BALLARD POWER SYSTEMS, Burnaby, BC 2007 – 2009
Supplier Development Engineer (2008 – 2009)
* Ensured that suppliers met technical, capability and quality requirements through the Pre-Production Approval Process (PPAP) and were in line with product cost targets.
* Researched and evaluated potential suppliers with respect to ability to execute against Ballard's long-term strategic plan.
* Assessed product feasibility and quality for the automotive fuel cell stack (MK1100), Bus program (HD6) and Back-Up Power programs (1020 ACS & 1300).

Manufacturing Engineer (2007 – 2008)
* Developed hydrogen fuel cell assembly processes for the MK1100 program. Past process had no flow and had a lot of waste in the system. The MK1100 fuel cell is the lead automotive program for Ford Motor Company and Daimler Corporation.
* Drove variability out of the finished stack assembly by implementing process changes and/or recommending product design changes.
* Investigated root causes behind any out-of-specification conditions and implemented corrective actions.

FORD MOTOR COMPANY, Dearborn, MI, USA 2001 – 2007
Manufacturing Engineer, Vehicle Operations
* Acted as Systems Engineer for Body Shop sheet metal on the 2008 Ford Taurus / Ford Taurus X / Mercury Sable at the Chicago Assembly Plant. Worked with Ford Stamping, Ford vendors and Ford body launch teams to ensure a quality product. Ensured that all "A" surface sheet metal was free from dents, dings and that specified margin and flushness requirements were met.
* Launched the Ford Focus (3dr/4dr/5dr/Wagon) underbody tooling at Wayne Assembly Plant for the 2006 Consolidation program. Reduced total cost by approx $1.5 million USD by eliminating non-essential program content. Increased line rate in the rear ladder line from 62 net to approx 70 net jobs per hour (JPH).
* Launched the Lincoln LS closure manufacturing and closure install tooling at Wixom Assembly Plant for the 2003 refreshening program. Ensured that all "A" surface sheet metal standards were met and eliminated overhead cost by 2 heads per shift.
* Provided simultaneous engineering, manufacturing direction, and assembly feasibility to ensure product / process compatibility from the early stages of development through the launch process. Delivered capable processes and tools for body shop operations.
* Assisted in establishing and delivering program investment, variable cost, and weight, quality and capacity targets.
* Took a leadership role in resolving assembly related concerns for respective area of responsibility.
* Supported variability reduction and lean manufacturing initiatives and incorporated global manufacturing strategies and best common assembly practices.
* Managed the design, development, installation and launch of body assembly tooling. Worked as a team with Ford manufacturing & design engineers, Ford assembly plant and tool vendor personal to make each program a successful launch.

TELEFLEX AUTOMOTIVE, Troy, MI, USA 2000 - 2001
Applications Engineer
* Led the design and development of the Accelerator & Cruise Control systems for Ford Motor Company.
* Managed all Ranger, Explorer, and F-53 Stripped Chassis programs.
* Met with Ford engineers on a daily basis to discuss and resolve new, current or past program issues.
* Reported issue status and resolution to Ford and Teleflex engineering, purchasing, and manufacturing operations.

YAZAKI NORTH AMERICA, Canton, MI, USA 1996 - 2000
Mechanical Design Engineer
* Led the design and development of Instrument Clusters for the Toyota and Mitsubishi North American markets.
* Worked with OEM customers, Yazaki Corporation-Japan office, North American suppliers and Yazaki manufacturing team during product development.
* Traveled to Yazaki's Mexican manufacturing operations to ensure a quality launch of each product that I was involved in.

CARRON & COMPANY, Contracted to Ford Motor Company, Dearborn, MI, USA 1995 - 1996
Design Aid Coordinator
* Chaired and coordinated the 1999 Expedition/Navigator Design Aid meetings.
* Coordinated installation of latest level prototype parts on design aid bucks for packaging analysis.
* Reported complex problems with underhood packaging to Design Engineers.

Weight Analyst
* Analyzed total weight of 1999 light truck subsystems to ensure that US government emission standards were met.
* Tracked and recorded weights of steering, suspension, wheels/tires, and interior components.

GENERAL MOTORS CORPORATION Pontiac, MI, USA Summer 1994
Engineering Intern
* Worked with Product and Container Engineers to develop sheet metal racks.
* Developed and delivered quote packages for sheet metal container assemblies to vendors.
* Traveled to various plants and suppliers to inspect and analyze body part containers.
* Followed up with suppliers on body panel rack tooling.

EDUCATION & PROFESSIONAL DEVELOPMENT

Bachelor of Science – Industrial Engineering Technology 1995
Central Michigan University, Mt Pleasant, MI, USA

Six Sigma Greenbelt / Process Control Methods / Failure Mode and Effects Analysis (FMEA) / Systems Engineering Fundamentals / Global 8D / Experimental Design /
Manufacturing Reliability / Applied Consumer Focus / CM4D / GD&T

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 2566)

Go to Search Parameters...

Brief Description

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Thorough knowledge of material management property management, accounting management, procurement and inventory management.

General Accountant/Financial Reporting

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Honest, proactive, innovative, safe, persuasive

A hard working and dedicated recent graduate with proven organizational skills and practical experience in geological field work. Effective leadership skills and a cooperative team player with the willingness to learn. Can be relied on to get the job done. Seeking a geologist position.

Intend to build a career with leading corporate with committed & dedicated people, which will help me to explore myself fully and realize my potential. To be a part of dedicated, goal-oriented problem solving team.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

Complete Facility Maintenance

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

HR/Recruiting/Client Relationship Expert

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Management/Business Development of Engineering/Consulting Services

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

I have gained significant knowledge in well drilling related activities including formation study, understanding of potential reservoir, Drilling and logging, Reservoir mechanics including estimating oil reserves,completions, drilling, volumetric reserves calculations/Production Forecasting, IOR

Over 10 year experience globally, CEE, Europe in general management, logistics, transportation and supply chain - excellence in strategy, costs optimization, business development, operational excellence, change management and restructuring

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

College graduate/entry level electrical engineer

Instrumentation, Automation, control & electrical engineer with 3 years experience

Purchasing/Logistics/Supply Chain Expert for more than 12 years of solid experience

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

Working as a Paymaster for more than 6200 employees.

Customer service, clerical, dental, medical

Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.

Having 4 year exp. in automotive sector.

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Mining engineer, master in HSE, no experience.

Geology and hydrogeology

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Information Technologies, Windows2000, XP. English, Russian, Turkish

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

Experienced Graduate Mechanical Engineer & Post Graduate (Marine Engineer) from United Kingdom HOLDING COC (CERTIFICATE OF COMPETANCY), With Shipping background,Drydock,Offshore & Sailing experience as Engineer Office in Command. I have 7 ur on hand experience on International Level.

Safety Manager/Auditor with Fire/Security and Enviromental experiance

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out