Resume - Power plant engineer involved in a variety of power plant equipment design and c...

Misco Jobs

Resume #8921

CONTACT INFORMATION:
View contact information...

Objective:
Challenging position in a growth-oriented organization, which offers diverse job responsibility in mechanical engineering using my skills as a responsible, efficient motivator of successful engineering teams.

Education:
University of Central Florida, Orlando, FL
1998 - 2000
MS in Mechanical Engineering. Concentration in Mechanical Systems. Dean's List

Northeastern University, Boston, MA
1994 - 1997
BS in Mechanical Engineering. Minor in Mathematics. Dean's List

Work Experience:

Mechanical Engineer

Siemens Westinghouse Power Corporation, Orlando, FL - Power Generation Industry.
2000 – 2004
Thermal Equipment Engineering Group

As a cognizant engineer of the Thermal Equipment Engineering group, the area of work is on Heat Recovery Steam Generators (HRSG), Steam Surface Condensers, Cooling Towers and Rotor Air Cooler Kettle Boilers. Position involves writing technical design specifications for the above equipments based upon the customer specification (Contract) and a variety of codes such as the American Society of Mechanical Engineers (ASME) section I (Boiler Code) and section VIII division 1 (Pressure Vessels), Heat Exchange Institute (HEI) standards, Tabular Exchange Manufacturing Association (TEMA) etc.
In addition, responsible for jobs procurement such as the review of vendor drawings, erection procedures, shop fabrication procedure, review and development of P&IDs and associated instruments list. Also participate in vendors bid evaluations, review or proposals technically and commercially in order to select a fit vendor, responsible of project management and review of all vendors deliverables. Responsible for interface with the vendor, A/E and trouble shooting related issues that might arise at site during project commissioning."

As a group Technical Lead for the Steam Surface Condenser and the Rotor Air Cooler Kettle Boiler Heat Exchangers, I had the responsibility to come up with a standard design for both of these equipments in order to reduce the engineering hours and the cost involved. In addition, I was also involved in standardizing the Selective Catalyst Reduction (SCR) System used in the Heat Recovery Steam Generator to minimize the exhaust Nox from the gas turbine. I have also been involved in doing some Finite Element Analysis calculations with one of our HRSG vendor to come up with the best Tube to Header Connection and have been published to the ASME committee for their review. Position also involved heavy customer contact centered on bid proposals, vendor specifications and client support. In addition, support to marketing/sales groups in order to secure more orders and applications group during bid proposals stage.
Aside of my office responsibilities, I have been also involved in many of "Site Readiness Reviews", it is a process in which the responsible engineer goes out to the site and check on the completeness of the equipment and checks for any show stoppers for the operation of the plant. My responsibility involved a complete check of the HRSG, rotor air cooler and the condenser.
One of the main challenges was to come up with a first time engineering Air/Fuel heat exchanger design to be used in conjunction with a Fin/Fan cooler used to heat up the fuel gas for better performance and to set up the control philosophy description for both of these systems and perform site commissioning of the system. The system was used in two different projects in Mexico and were successfully commissioned.

2004-Present
Balance of Plant Group

As a cognizant engineer of the Balance of Plant group, my scope of work included working on Fuel Gas Heaters, Fuel Gas Compressors, Fuel Gas Skid system and system design of main steam, feedwater, condensate and fuel systems. Responsibilities include process engineering/ mechanical engineering, engineering planning and scheduling and technical ordering document generation. My principle output include system design specifications (Design Basis & Functional Requirements), Engineering Flow Schematics and equipment specifications with calculations to support the design. From these documents, Supply Management can procure equipment and systems, and AE can complete the detailed design of the plant with appropriate overview / approval by BOP. My support of the Erection / Commissioning activities at site include walkdowns / inspections, resolution of site issues (questions, changes, performance problems)".

Mechanical Engineer

Yang Enterprises, Inc., Winter Springs, FL - Construction industry. Primary customers: Exxon Corporation, Mobil Corporation and Kennedy Space Center.
1998-2000
Has been given assignments to perform on-site inspections, and post analysis of the site. Work on mechanical as well as civil aspects of a design. Prepared contract documents, site investigation reports and bid proposals. Provided cost estimates for a government contract. Designed Gasoline Service Stations including site layout, grading plans, utilities plans, landscape plans, petroleum equipment schedules and convenience mart details. Concentrated on working with AutoCAD 14 and Micro
Station to generate plans.
My job responsibilities included to set up AutoCad training classes for all the employees.

Contractor

CDI Corporation - Westinghouse Power Corporation, Orlando, FL
1998
A six-month contract assignment within Strategic and Product Development group. (John Schwab, Manager) Contract consisted of working on 501G 2x1 Combined Cycle - Ironwood Power Project-AES.
Assignment involved modifications of proposed drawings made on AutoCad 14 version, heat balance cases, and process flow diagrams.

Mechanical Engineer

SGM Engineering, Inc., Altamonte Springs, FL - Commercial HVAC and Plumbing industry.
1997-1998
Worked as a mechanical engineer, while performing some drafting and analysis on final product delivered to clients. Acquired experience both in mechanical and electrical aspects of a design process. Have been delegated major assignments with significant client base.

Training Experience

* Acquired a certificate from the American Society of Mechanical Engineers upon attending "Section VIII, Division 2 Pressure Vessels" training class.
* Acquired training certificates from Siemens Westinghouse in a variety of Power Generation Industry equipments such as combustion turbine, steam turbine, combustion turbine performance and design and project management.
* Acquired a certificate from the American Management Association "AMA" from participating in Project Management with Suretrak Course.

Publications
* I have published a paper at the ASME International Gas turbine Institute titled "Comparison to various Tube to Header Attachment Detail Under Cyclic Service".

Awards
* I was awarded two performance awards in recognition of the outstanding contribution to the success of Siemens Westinghouse.
* Received a spot award as a result of dedicated support to other groups to meet project deadline

Computer Experience:
Microsoft Office 97,98, 2000, Master Series (Ideas), MatLab, AutoCad, Mathcad, Micro Station, Ansys, Pro-E and Gate Cycle.

References:
Professional references are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2388)

Go to Search Parameters...

Brief Description

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

A geophysical graduate with 8 years marine survey experience, coupled to business, project and people management skills. Currently working for an international consultancy, integrating geophysical and geotechnical surveys into engineering projects worldwide.

CAT parts logistics supervisor with five years experience in supply chain management and 8 years experience in Multinational organizations. I hold a bachelor degree in Commerce, political science, commercial representation certificate from the ministry of foreign trade & a certified Java programmer.

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

Have international experience in project planning/scheduling, cost estimating/control, and project procurement.Hold advanced education and research background in project management and international construction management, and proficient knowledge and skills in applying P3, PRISM, and CONVERO.

Specialist in Security, Safety and Risk management

I have completed Masters degree in Geological Sciences from Jahangirnagar University, Bangladesh in 2002. I am citizen of Bangladesh. Now I working as an Assistant Manager(Training) in Gas Transmission Company Limited in Gas sector of Bangladesh Government. But as a background of Geological sciences

HSE ENGINEER

With a Chemical Engineering degree and 5 years experience in Oil & Gas, Water Treatment, Quality Control and Project Management, I possess strong analytical, quantitative, communication, management and problem–solving skills. My initial objective is to build on these skills, gaining full chartered

I am keen to be considered for Graduate Mechanical Engineer, I have recently completed a Masters in Mechanical Engineering at University of South Australia. I have seven months experience worked for Praga Tools Ltd, India, as a Junior Production Engineer,

I am currently working with the National Environment Agency as an operation engineer in an incineration plant. Had obtain Degree in Electrical Engineering, and is a Australian PR

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Able to do minor mechanical, plumbing and electrical work. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Specialist in Telecom looking for a job in CIS

CMA (USA), ACIA (USA), ACMA.Internal/ext audit,budgeting and forecasting, project execution and evaluation, financial reporting,Accounts finalization (IFRS & US GAAP), Financial Analysis, Control self assessment, ERP implementation & dealing for financial arrangement.ERP SAP/Spiridon/Atlantis

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Document Control

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Professional with Ten years of total work experience out of which Seven years in cost estimating, cost control, and project management. Proven record of success analyzing all aspects of a project or area of responsibility, project scheduling investigating and improving efficiencies of operations.

Diverse background in construction, logistics, remote location activity that can be used to meet your company's immediate and long-term needs. 15 years of increasing responsibilities in the construction industry. Multiple job responsibilities including blueprint reading and project layout.

SALES PROFESSIONAL with an impressive record of top performance and the proven ability to achieve solid sales growth….to effectively capitalize on both new and existing market opportunities

HSE Advisor with 10 years international QHSE work experience (Oil Industry)

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

To obtain a position in computer science/computer information systems field, telecommunications field and as well as in any other business field where I will be able to develop my skills.

I am a experienced safety coordinator, I am a (CSO) national construciton safety officer and have completed the UofA Occupational Health & Safety Program.

Operations engineer on aviation refuelling operations, design and maintenance management in the airport depots, quality assurance manager on SHE issues, supply management for aviation fuels

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

With over 14 years experience in Camp and Catering Management and a long practice of difficult countries ( Nigeria, Angola, Myanmar(ex Burma), Iran, Algeria, Kosovo, and Afghanistan), I believe I could make a significant contribution in helping The Company achieve its goals and objectives..

i am holder of MBA degree, i was working in lebanon as consultant of UNDP then left to Shanghai and work as vice president of a manufacturing company and now i am currently in Saudi Arabia as project cost conrol of petrochemical construction company

Experience of greenfield project, Production of iron ore and diamonds. Mine planning. Implementation of ISO-14001. Safety management. Management as well as Supervision of all mining activities viz. drilling, excavation, haulage, dozing, grading etc. Quality control and management

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

Free! I am very interested in a career in economic geology. Available for Willing to relocate both domestically and internationally. Available to work immediately. Over three months experience in Alaska doing geologic mapping/sampling for major gold mining company (summer 2008).

Humility, Availability, dynamism, versatility and team spirit are my main assets

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

Associates Degree in Electronics Technology. No work expierience, graduated in 12/06. Ready to work!

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Rigger crane op scaf

Power plant engineer involved in a variety of power plant equipment design and commissioning.

B.E (Mechanical) with 3 years of experience in automobile industry (sheet metal), good working knowledge of Pro/Engineer, Pro/intralink and exposure to Catia V5.

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out