Resume - LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9...

Misco Jobs

Resume #9439

CONTACT INFORMATION:
View contact information...

OBJECTIVES: LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.
EDUCATION:
M.S. Graduate 1996 - 1999. Iowa State University, Ames, IA 50010.
Courses Industrial Technology Department: Occupational Environmental Health and Safety and Toxicology. Total of 12 courses (=37 semester hours).
B. S. 1989 -1994. University of Puerto Rico, Cayey, Puerto Rico 00738.
Department of Natural Sciences

LANGUAGES: Read, speak, and write fluently Spanish and English.
WORK EXPERIENCE:
Laboratory technician of water analytical chemistry
Employer's name: Southeast Water Reclamation Plant. 3603 Guava Avenue
Lubbock, Texas 79457.
Supervisor's name: Neal J. Stone
Phone Number: 806.775.3242
Starting date: June 17, 2002 to June 9, 2004
Contact current supervisor: yes
Duties:
1. Perform analytical chemistry procedures and practices according to the City of Lubbock, Federal (United States Environmental Protection Agency), and State of Texas (Texas Commission for Environmental Quality) regulations for wastewater samples.
2. Wastewater samples from different treatment stations, septic haulers, and industries are analyzed for chemical determinations. Chemical determinations such as total/volatile suspended solids (TSS/VSS), total/volatile dissolved solids (TDS/VDS), chlorine residual, filtration test, feed sludge, digester pH and temperature, and 5 days Biochemical Oxygen Demand (BOD5) are the main and traditional wastewater plant commitment.
3. Quality control and assurance are followed to develop all laboratory practices from chemicals and samples receiving, lab environmental controls, reactions, and results.

Air Emission Specialist
Employer's name: Iowa Department of Natural Resources (DNR)
7900 Hickman Road Suite 1. Urbandale, IA 50322
Supervisor's name: Brian Hutchins
Phone Number: 515.281.4918
Starting date: January 02, 2001 through December 21st, 2001
Contact current supervisor: yes
Duties:
1. Assisted in the development of a statewide comprehensive air emission inventory for Iowa. The inventory included emissions of six criteria pollutants and 188 hazardous air pollutants from industries, commercial businesses, residential activities, and mobile sources.
2. Collected emissions data and processed descriptions from industrial sources using an Emission Inventory Questionnaire. Provided assistance to facilities in completing the questionnaire by participating in workshops and consulting. Calculate facility emissions by using emission factors, material balance, stack test data, and emission models such as EPA's Tanks 4.0 software.
3. Estimated the emissions from small businesses and residential activities using national, state, or county activity data following the methods outlined in the Environmental Protection Agency Emission Inventory Improvement Program technical documents. Worked with research activity data using the internet and other government agency sources.
4. Worked on assuring emission inventory data according to Iowa DNR procedures and guidance. Verified emission factors, control efficiencies, mathematics, and acceptable assumptions.
5. Assisted in maintaining an air emission inventory database for the DNR.

Analytical Crop Technician
Employer's name: Monsanto Corporation (Molecular Breeding Lab)
3022 Convenience Boulevard. Ankeny, IA
Supervisor's name: Devlina Lahiri
Phone Number: 515.963.4262
Starting date: October 8th, 1999 to December 22nd, 2000
Contact current supervisor: yes
Duties:
1. Measured crop protein content as total nitrogen content in corn and soybean by a substitution of Kjeldahl method by using the CN analyzer Carlo Erba NA 2100 and Flash Eager 200 (ThermoQuest CE Instruments).
2. Conducted assay of lysine oxidase on transgenic single seed of corn with determination by a colorimetric method by the application of Multiprobe EX™ instrument.
3. Conducted corn and soybean oil extraction by accelerated solvent extraction (ASE), with a Dionex system (modification of Soxhlet).
4. Worked on the analysis of data and participated in weekly reports.

Laboratory Technician
Employer's name: Iowa State University Veterinary Medicine School. Diagnostic Laboratory (Racing Chemistry Department).
16th Christensen Drive, Ames, IA
Supervisor's name: Dr. Katherine Kozack
Starting and ending dates: April 1999 through October 1st, 1999
Contact current supervisor: Yes
Duties: Worked with two different drugs screening methods: (1) a method for detection of quinine, tranquilizers, and primary and secondary amines as well as antihistamines, phenothiazine derivatives opiates, and cocaine, and (2) a method for the analysis of barbiturates, dypheyllydantoin, and gluthethimide. My mainly tasks in this laboratory was the separation analysis using thin layer chromatography and High Performance Liquid Chromatography for dogs and horses racing track urine samples.

Environmental Health and Safety Specialist-Internship
Employer's name: Unilever Corporation, Puerto Rico.
Supervisor's name: Wilson Davidson
Starting and ending dates: May 1997 through August 1st, 1998
Contact current supervisor: Yes
Duties:
1. While as I was a student at Iowa State University, I did an internship at Unilever HPC NA Manufacturing Corporation, which consist of two units: Q-Tips for common ear swab and Prince Matchabelli for perfume manufacturing process. I performed the Material Safety Data Sheet update and classification by toxicity and department handling for over 525 in house chemical compounds.
2. As part of my responsibilities, I lead an ergonomic assessment project according to associates' health concerns (proactive and active). Physical health problems were identified as repetitive injuries syndrome (RIS), carpal tunnel syndrome (CTS), and back injuries. Ergonomics design was applied as well as good and appropriate posture, biomechanical evaluations, and application of ergonomic devices.
3. I conducted a noise level assessment, which is one type of indoor workplace assessments, by using the db-3070 Noise Monitor.
4. I also worked on conducting indoor gases analysis (H2S, CO, O2, and LEL). These gases were measured at the horizontal centerline of suspected work area. We used the Aim Safety Co., Four Gas Monitor. The calibration and data obtained was kept on record at the company's environmental health and safety department. Hydrogen sulfide, carbon monoxide, oxygen, and low explosive level must be on reasonable range according with Occupational Safety and Health Administration (OSHA) 29 CFR 1910.

Laboratory Technician-Internship
Employer's name: Ames Water Plant and Pollution Control. 300 E 5th St. Ames, IA.
Supervisor's name: Phil Propes
Starting and ending dates: June1995 through August 1st, 1995
Contact current supervisor: Yes
Duties: Hardness, Softness and Bacteriological Analyses of city water.

HONORS AND AWARDS:
Chesebrogh Pond's Manufacturing Co.
Shering Plough Pharmaceutical
Mac Neil Pharmacies
Las Piedras Johnson & Johnson
Municipality of Las Piedras, Major's Award
Iowa State University academic outstanding performance

TRAINING AND WORKSHOPS:
The Tenth Annual Emission Inventory Conference
The Sixteenth National Pesticide Forum
Hazard Analysis and Risk Assessment Seminar
Foodborne Pathogens and Bloodborne Seminar
Environmental Protection Seminar Organizer

USEPA Air Pollution Training Institute Courses:
Mathematics Review for Air Pollution Control
Prerequisite Reading on Control Technology
Fabric Filter Operation Review
Electrostatic Precipitation Plan Review
Wet Scrubber Plan Review
Air Pollution Control Orientation Course
Air Pollution Control Systems for Selected Industries

PROFESSIONAL SOCIETIES AND MEETINGS:
American Chemical Society Member
American Society of Safety Engineer Member
American Association of Cereal Chemist
Texas Water Utilities Association
General Natural Sciences Association President

COURSE WORK AT THE UNIVERSITY OF PUERTO RICO, UTUADO REGIONAL COLLEGE AND CAYEY CAMPUS.

During my five years at the University of Puerto Rico, Cayey Campus, I successfully completed many courses in wide range of disciplines including: Organic Chemistry, Analytical Chemistry, Inorganic Chemistry, Spectroscopy, Biology, Genetics, and Statistics. The B.S. chemistry courses and laboratories introduced the theory and principles of different instrumentation, and included practice sections (e.g. Atomic Absorption (AA), Flow Analyzer (FA) and Ion Chromatography (IC)).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 2396)

Go to Search Parameters...

Brief Description

See below

Experience in stream assessment, macrobenthic ID, wetland delineation, Section 401/404 permitting, NEPA and SEPA, protected species. formal training in wetland delineation, extensive field experience, in Texas, North and South Carolina, Virginia, and Venezuela.

M.Sc. Applied Environmental Science B.Sc. Geology Houours Expertise: Waste Management, EU Environmental Legislation, Environmental Impact Assessment, Ecology, Communications, Project Management

B.E., Exp-1 year, Elect. Maintenance Dept. in BOSCH Ltd.

working in sales industry as sales representative

Educational Qualification

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

Doctorate in Science, Ecotoxicology, marine pollution, Enzymes, Biomarker, biomonitoring of pollution,

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Bachelor of Engineering graduate in Electronics & Communication in honours. Now working as a RF Engineer in CDMA optimization Project driven by Wipro Technologies, Gurgaon. Our client is Motorola Japan Limited. Skills: RF Planning and Optimization

Senior Instrumentation & Control Systems Engineer

My objectif Is to prove my skills experience and obtain challenging position in which I can utilize my abilties to meet the need of the organization in which i'm employed.

a good team player,skillfull in environmental resourse management and higly inteligent

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

I was worked at PT. Pusri Palembang,INDONESIA (Bulk Carrier Shipping Division), responsible for maintenance diesel engine

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

To obtain gainful employment in the Software Engineering field with an organization that will benefit from my knowledge and experience.

Seeking a challenging position in Environmental Engineering field, Environmental safety and Health, Environmental Quality Monitoring, Water and Waste Water projects where I can apply the knowledge that I have learned and gained practical experience and serve the organization.

Strengths in project management, problem solving, team leadership, instrumental analysis, laboratory techniques, analysis data, research proposals, design interactive website, poster, oral presentation, Stella computer modelling, Outlook, MS Office Suite, Adobe Photoshop, and Fusion.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

Recent college graduate with experience in environmental education, natural resource conservation, advocacy and consulting work.

Design eng. in solid works, ideas, and ug & b-tech in mechanical eng.

Application post for welder

To be a part of a progressive organization that gives scope to enhance my knowledge, skills and confidence to achieve my goals with the combination of honesty, sincerity and hard work

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.

Training, education and experience in health, safety and the environment.

I am a talented and hard-working individual, committed to the environment, seeking to gain experience in an environmental field.

Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants

Obtaining a position as an Electrical Engineer or Designer to utilize my strong technical, analytical and organizational skills.

COO - Director of Business Development - VP/General Manager

B.Sc. Natural and Health Science, B.Tech Environmental Health, Health, Safety and Environmental Management

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Skilled in Environmental Impact Assessment

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

Outstanding Engineer

I am an experienced research chemist specializing in analytical chemistry using chromatographic instrumentation for the analysis of petorleum, environmental and food samples

Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling

Translator

Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.

To obtain a civil/environmental engineering position with the opportunity for promotion to project management

Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out