Resume - Master Qualified Instrument Engineer with 10 years experience of detailed design...

Misco Jobs

Resume #10571

CONTACT INFORMATION:
View contact information...

OVERVIEW

Professional Instrumentation Engineer, skilled in a variety of Instrumentation areas from estimation through to design completion, including vendor and package unit control, requisitioning, specifications and design team liaison.
Extensive experience of Hazardous and safe area instrumentation specifications, requisitions and data sheets in a variety of formats.
DCS interface and I/O allocation for a number of systems,
Understanding and administration of a variety of instrument database software packages, including INTOOLS, Access and PARADOX

CAREER SUMMARY
2000 - 2004 Jacobs Engineering Ltd (contract)
Control /Instrumentation Engineer

September 2004 - present.
Jacobs Manchester, on-going review of 'moth-balled' pharmaceuticals facility P&ID's and Instrument schedules plus associated activities. To enable costing of project completion and estimate impact on current systems and 'on-hold' instrument requisitions

October 2003 - August 2004.
Jacobs, (Leiden - NL) Clean Diesel Refinery project for Conoco-Phillips (Honeywell DCS). Instrument Specifications and data sheets for Pressure, Temperature, Level and analyzer instruments. On-going database administration and 'live' piping / mechanical interface for 3D model and instrument installation contractor.

Sulphur Recovery Unit for Shell (France).
Main tasks were Instrument, Analyzer & valve specifications, data sheets, requisitioning and purchase. Database control, inter-discipline liaison (including 'live' Piping/Mechanical interface for 3D model)
Also completed part-time work on two Front End design packages, including the development of datasheets and specifications for in-line instrument & valves, VESDA and F&G system investigation and cost estimation.

August 2002 - Sept. 2003
Located in the Manchester office, completed a 10% estimate before beginning the detailed design phase of a pharmaceuticals project for Novartis (Emerson Delta V DCS – Foundation Fieldbus). Tasks included instrument datasheets & specification (including all Relief and breather valves) instrument requisitioning, package unit liaison, Access database control and piping mechanical liaison for 3D model.

May 2001 - August 2002
Worked in Jacobs, Leiden (The Netherlands) office, on a Shell petrochemical project (Emerson Delta V DCS, Yokogawa FSC SGS), after completing the cost and man-hour estimate phase in September 2001, main tasks included Instrument and Analyzer specifications, data sheets and requisitioning. Inter-discipline work (including Piping/Mechanical interface and review of 3D model and process liaison), administration of in-house EDB (Engineering Data Base) software to produce all project datasheets and a variety of instrumentation, cable and termination schedules for instrument designers.

October 2000 - May 2001
Conducted a survey of existing instrumentation, analyzing its conformance to process conditions at Rhodia's Holmes Chapel site. (3months) Prior to that I spent 5 months located at Astra-Zeneca's Macclesfield site, working as part of an integral design team, upgrading a Pharmaceuticals plant (SRP). Major tasks include instrument & valve specifications & data sheets, requisitioning, installation contractor liaison, installation contractor scope of work development & package unit control and interfacing.

1996 – 2000 Simon-Carves Ltd
Control /Instrumentation Engineer

Reporting to principal/chief engineer, I undertook a number of tasks throughout the detailed design process for a variety of process chemical plants. (Clients including Astra-Zeneca, EVC, Bechtel, Exxon, Kemya & Kodak). Projects have included:

1999-2000 Astra/Zeneca P4 Agrochemical Project
Design & construction of a Brownfield Agrochemical facility (Emerson Delta V DCS and hard-wired trip systems)
Instrumentation and Valve Specifications and data sheets, Interface rack, Local panel testing & DCS I/O allocation and control, client PCS team liaison.
Design, development and control of instrumentation database, producing all necessary design team schedules, including cable, termination and instrument index.

1999 Exxon/Kemya LPDE Project
Design & Construction of a Greenfield LPDE process facility.
Specification / purchase of a variety of hazardous area equipment for a Saudi Arabian LDPE project. Tasks also included client/vendor liaison, package unit control and database administration. Administration / control & development of INTOOLS database.

1999 Kodak VOC Rejuvenation Project
The upgrading of an existing plant including the addition of VOC unit.
Instrument Engineer involved in all aspects of instrumentation from rack /field instrument layout, installation specification, development of control loop diagrams, specification and purchase of a variety of items (including monitoring equipment), man-hour/cost estimation and control.
Managing change at all stages of the detailed design through to the construction phase.

1997-1998 Astra-Zeneca Az2 Agrochemical Project
Design & Construction of an Agrochemical process facility, (Emerson Delta V DCS and hard-wired trip systems)
Instrument engineer with responsibility for all aspects of the instrument database (PARADOX format). Control of DCS I/O allocation, control room layout and valve specifications and control.

1996-1997 EVC/Bechtel PVC Rejuvenation Project
Working as assistant Instrument engineer, carried out various database tasks before spending 6 months on site at EVC's Runcorn installation. Major task undertaken was an instrument survey, ascertaining the actual plant condition before a rejuvenation project was implemented on a PVC facility.

EDUCATION
1989 - 1995 Coventry University
MSc. Control Engineering
B.Eng. Combined Engineering

References
On Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7001 to 7050 of 15339)

Go to Search Parameters...

Brief Description

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

If you are looking out for someone who can 'Make a difference', Daring, Challenging, 'Thinking out of the box', Multi-tasking ability, is not afraid to speak up his mind plus Business Development, People Management proven experience & skills, please read this application.

Exploration geologist in oil company. Structural geologist

Ph.D., Zoology (Commanded) Bharathidasan University, Tiruchirappalli, Tamilnadu, India, Thesis title-Oil effluent toxicity and detoxification responses in the freshwater mussel, Lamellidens marginalis

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I have 22 years of experience in the mining industry, Blasting Certificate For Open Cast Mines; Blasting Certificate For Scheduled Mines; Detnet Blasting Certificate.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Looking for Mud logging Geologist Position

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 [ 141 ] 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out