Resume - Trade and degree qualified welding engineer and m,etallurgist with 25+ years exp...

Misco Jobs

Resume #10809

CONTACT INFORMATION:
View contact information...

Qualifications
2003: International Welding Engineer
WTIA
2002: MIE Aust
Institute of Engineers Australia
1989: University of the Witwatersrand, Johannesburg
MSc (Eng) (Welding)
1984: Engineering Council of South Africa
Registered Professional Engineer
1977 – 1981: University of Strathclyde, Glasgow
BSc (Hons), Metallurgy (Upper Second)
1976 – 1977: Stow College of Technology, Glasgow
ONC Metallurgy (with Distinction)
1974 – 1976: Kirkaldy Technical College
CGLI, Fabrication and Welding Technician
Part II (with Merit), Part III (with distinction)
1971 – 1974: Kilmarnock Technical College
CGLI, Fabrication and Welding Technician
Part I (with Distinction)

1967 – 1971: Ayr Academy
SCE 'O' Levels in English, Arithmetic, Maths, Technical Drawing and Biology

Career History
May 2003 to date: Welding Engineer
Mitsubishi Motors Australia Ltd.
Based in the Body Shop, duties included providing expert technological assistance to both Body Shop and Hardware divisions within MMAL.
During commissioning of new welding equipment, to ensure that the process was fully functional and produced product meeting all necessary specifications.
The main processes within MMAL included MIG, resistance welding and wire seam welding, for both robotic and manual applications.
Carry out vendor audits to ensure product conformed to contract specifications.
Assessing new equipment and providing appropriate technical reports for management to consider for potential process implementation.
Performing PFMEA analysis on components and Risk Analysis on work stations

Nov 1998 - April 2003: National Technology Advisor/Manager – Qualification and Certification Board
Welding Technology Institute of Australia
Providing expert technological assistance and engineering consultation on all welding and related metallurgical matters to Australian Industry in general. This may simply be a telephone conversation or conducting on-site investigation and reporting. This would also include expert opinion in legal cases.
Advising on welding requirements relating to Australian and International Standards, e.g. welding and weld procedure qualification and welding co-ordination.
Conducting technology reviews in Australian Industry and assisting in the implementation of AS/NZS ISO 3834, Welding Coordination.
Liaison between WTIA and other organisations, e.g. with the Australian Greenhouse Office and the implementation of the Greenhouse Challenge in the Australian welding Industry.
Providing opinion on technology levels and application of the various welding related software programmes available worldwide. Typical programmes covered PQR and WPS documentation, distance learning, estimating and through to full traceability welding systems for compliance to National Standards.
Managing the WTIA Q&C Board. Producing and implementing a Quality Assurance System for WTIA Qualification and Certification Board under IIW guidelines.

Drawing up and producing appropriate examination papers for the various levels of welding qualifications offered, from AS 2214, AS 1796 Certs 1 – 10, Inspectors to post graduate diplomas. Ensuring the marking and moderation process is carried out in accordance with system requirements.

July 1995 to Nov 1998: Manager – Centre of Technology, Welding
Southern African Institute of Welding

Liaison with the University of the Witwatersrand in the implementation of, and lecturing, on a post graduate course leading to the award of GDE, or with further research work, an MSc. This course was accreditation by The Welding Institute (UK), and led to the further award of European Welding Engineer by the European Welding Federation (EWF). Duties includde ensuring both course content and duration conformed to the requirements of the EWF.
Preparation and presentation of new welding oriented courses. For example, an overview of Surfacing (hardfacing and cladding), inclusive of wear and corrosion phenomena, associated basic metallurgy, metallurgy for wear resistance, welding and allied processes (MIG, TIG, SUB ARC, Flux Cored, Thermal spraying etc.).
Consulting to Southern African industry in general, in all matters associated with welding, welding metallurgy, heat treatment and the various multinational welding specifications.
Qualification of welders and welding procedures to all national codes, e.g. ASME IX, ANSI B31.1, B31.3, AWS D1.1, EN 287 and 288.
Carrying out engineering investigations on all welding and related failures, reporting and giving recommendations on rectification and/or solutions. When required, giving assistance on welding matters relating to contractual obligations.
Consulting on computer-based weld documentation control systems and their benefits on the shop floor.

Nov 1994 to June 1995: Site Welding Engineer
Babcock Africa Energy (South Africa)

On contract to Babcock via AB Engineering based at Matla Power Station. Responsible for all aspects of welding, heat treatment and NDT. Ensuring all aspects of the job were properly qualified to the applicable codes and that all production targets were met.
The contract involved the replacement of H.P. headers and outlet piping in the superheater and reheater systems. Materials involved an upgrading from a 2-1/2 Cr 1 Mo to A335-P91 martensitic 9 Cr, X20. At the same time, all boiler steam raising elements underwent a G.O. on one unit and a Mid Term Inspection on a further two units.
Maintaining a computerised welding documentation control system and providing problem solving/trouble shooting, both practical and metallurgical was undertaken.
Responsible for 50 welders, 6 supervisors, data clerks and 2 sub-contract companies (heat treatment and NDT).

March 1994 to Oct 1994: Site Welding Superintendent
Babcock Construction Contractors (South Africa)

On contract to BCC via AB Engineering, employed as a welding superintendent on the Acrylo – Nitrile relocation project which involved the dismantling, shipping and re-erection of the plant from Austria to Sasol III, Secunda.
Responsibilities included the daily supervision of all aspects of welding production in the re-erection of piping, tanks and vessels.
Ensuring the correct P.Q.R's covering ADM, BS EN 287/288 and ASME IX where applicable and properly executed. Liaising with the client Linde/Sasol III, in all aspects of welding, heat treatment, NDT and statutory code requirements for vessel reinstatement.
Lastly, providing a metallurgical back-up on site, providing solutions when required and maintaining a computerised welding documentation control system.
Responsible for a staff of approximately 30 welders and 3 supervisors.

Sept 1991 to Feb 1994: Manager, Welding Engineering
Babcock Construction Contractors (South Africa)

Responsible for the management of the Welding Department for all Babcock construction sites and workshop. Development of new welding techniques and processes and the transfer of the appropriate technology to the workface.
Training and qualification of welders to most international standards, E.G. ASME, BS, DIN, TRD etc. Providing an engineering welding service to various departments within Babcock. e.g. R & M, Projects, Engineering and Estimating. Assessing the capabilities of various Sub-Contractors, including heat treatment and NDT companies. Trouble shooting on all Babcock sites, including Refineries and Power Stations. Providing a metallurgical input where necessary.
Development and implementation of a computer based welding Documentation Control System. The size of the program + 57000 Lines 200 integrated programmes.

Jan 1990 to Aug 1991 Site Welding Engineer
Babcock Engineering Contractors (South Africa)

Complete technical responsibility for all welding on the Babcock Mossgass Onshore Contract. Value R650,000,000. Responsible for qualification of all P.Q.R's and W.P.S in compliance with both ASME IX, ANSI B31.1 & 3 and Synfuels specifications. Total number of P.Q.R's required + 70.
Qualification of all welders, to ensure correct code requirements and correct mix of Alloy and Carbon Steel Welders.
Liaison with client and Babcock Site Managers on all welding NDT and heat treatment matters. Providing a metallurgical and trouble shooting service on site. Materials included cryogenic, stainless, inconels, nickel, carbon steel, low temp carbon steel, chrome moly (1.5, 2.25, 5 and 9) and others.
Responsible for the training and qualification of 200 local category 4 welders in conjunction with the East Cape Training Centre. Total welders on site 400.

Feb 1986 to Dec 1989: Technical Sales Manager
Welding Alloys S.A. (Pty) Ltd.

Responsible for the technical sales of Tubular Welding Wires including Submerged Arc, Open Arc, Flux Cored gas assisted types in both hardfacing and fusion welding processes and for all associated technical and engineering matters. Advising customers of performance characteristics and metallurgical considerations of the above materials and providing direct assistance when using these wires and the development of new alloy welding wires.

July 1984 to Jan 1986: Welding Engineer
Airtec Davidson (South Africa)

Responsible for devising and implementation of welding procedures, developments and processes and ensuring all welders are trained and qualified to the appropriate standards with regard to the fabrication of industrial fans.
Maintaining welding standards within recognised international specifications e.g.: ASM IX, AWS D1, 1, BS 4870 etc. Client liaison on welding and all related matters on individual contracts. Failure investigations and supervising research work where needed.

Oct 1981 to June 1984: Senior Scientist
Mintek (South Africa)

Alloy research, including some work on 3CR12 and hardfacing weld deposits. Full time research leading to MSc with the University of the Witwatersrand.

Oct 1977 to June 1981: University of Strathclyde, Glasgow.

Sept 1975 to Aug 1977: Welding Engineering Technician
R.D.L. Methil (Oil rig Fabricators)

Work included, preparing welding procedures with references to client and international welding specifications. Client liaison on welding progress, quality and procedure testing.

Oct 1974 to Aug 1975: R.D.L. Methil

Completed fourth year as an Apprentice Draughtsman.

June 1971 to Oct 1974: Newton Welding Ltd
First year apprentice welder at training school. Second year in workshop. Third year apprentice structural draughtsman in drawing office.

University Vacation Employment
Summer 1981 R.D.L. WESTBURN – WELDING ENGINEER
Summer 1980 WEIR WESTGARTH – WELDING ENGINEER
Summer 1979 FOX DIVING, GLASGOW – CONTRACT WELDER
Summer 1978 R.D.L. METHIL – WELDING ENGINEER

Papers Presented
Foundry Welding and Production (1983)
A Market Survey of Hardfacing Methods, Consumables and Microstructures
Author: J.L. Henderson

First International Conference on Surface Eng. ( The Welding Institute) 1984
Experimental trends in the assessment of composition and process variables for weld deposited hardfacing for abrasive wear resistance.
Authors: Garrett, Wright, Henderson and Ellis

Mintek Report No M258 (1986)
A market survey and alloy classification of hardfacing materials available in South Africa
Authors: JL Henderson and J Dalton

SAIF Surface Engineering Seminar (1986)
Microstructure versus Application.
Author: JL Henderson

Journal of the S.A. Institute of Mining and Metallurgy (Nov 1986)
A assessment of the factors responsible for the abrasive wear resistance of some weld deposited hardfacings
Authors: Garrett, Wright, Henderson and Ellis

R&M of Large Face Shovels SAIW Seminar (July 1987)
Components Subject to Wear.
Author: JL Henderson

Fusion - SAIW (Nov 1995)
Welding Modified 9 Chrome Steels.
Author: JL Henderson

Mechanical Technology (Nov 1996)
Structural Steel and Radiographic NDT in Terms of AWS D1.1 in South Africa.
Author: JL Henderson

Mechanical Technology (Feb 1997)
The development of power sources for welding aluminium
Author: JL Henderson

Mechanical Technology (May 1997)
Joining Dissimilar Metals By Welding and some Metallurgical Considerations.
Author: JL Henderson

Stainless Steel SASSDA (Sept 1997)
Purging for piping systems.
Author: JL Henderson

Mechanical Technology (Aug 1998)
MIG welding thin stainless steel sheet
Author: JL Henderson

Australasian Welding Journal (2nd Quarter 1999)
Back - to Basics, Important considerations when welding carbon to stainless steels
Author: JL Henderson

Australasian Welding Journal (3rd Quarter 1999)
Back - to Basics, Joining more dissimilar metals
Author: JL Henderson

WTIA 47th ANNUAL CONFERENCE
Monitoring NDT for Conformance Using Computer Assisted Management of Weld Records
Authors: JL Henderson and M Lewin

Australasian Welding Journal
Welding and the Environment in Australia
Author: JL Henderson

IIW Asian Pacific International Congress
The Greenhouse Challenge for the Welding Industry
Author: JL Henderson

Australasian Welding Journal (3rd quarter 2000)
Back-to -basics, Traceability and conformity assessment
Author: JL Henderson

Australasian Welding Journal (4th quarter 2000)
Back-to-basics; Aspects of welding thin stainless steel sheet
Author: JL Henderson

WTIA 50th Anniversary Conference (August 2002)
What Standard am I to use - AS 1556 Part 6?
Author: JL Henderson

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 15341)

Go to Search Parameters...

Brief Description

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Five tears of experience in the field of industrial environmental monitoring specially related to petroleum and petrochemical complexes.I have sound knowledge of US EPA regulation. I can also design air air polltion control systems.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

M.Sc Applied Geology. M.Tech Min Expln,PG Dip In Envt Mgmt & PGDip In Env Scs, 22 years of experience in govt industry. opte vrs ,desg Manager (Environment)

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Technical / Lead Safety Engineer

NDT inspector LVL II

reclamation and quarry

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Close supervision of projects handle and monitoring

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

Extensive field application and R&D experience in hard rock drilling rigs, rock tools, DTH hammer, strong trouble shooting skills of hydraulics

I have basic education, knowledge and experience as for Project Metallurgist

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

A result oriented and self-motivated M.Tech Civil Engineering Professional with over 18 years of rich & qualitative experience in Project Management, Civil Engineering and Construction Management of infrastructure projects including Airport Terminals, Buildings Roads and Flyovers.

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

Human resources

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out