Resume - Energy conservation, energy audit

Misco Jobs

Resume #10906

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:
2+ Years Working Experience as Consultant in Andhra Pradesh Productivity Council (APPC), Hyderabad. Work involves consultancy services to industries in the following areas,
* Techno Economic Feasibility and Methods Improvement
* Establishing Work Norms and Manpower Planning.
* Energy Conservation and Audit Studies.

PROJECTS COMPLETED:
* 'Low cost Mechanization and Work Simplification' at M/S ORIENT PAPER MILLS, Amali, Madhya Pradesh
* 'Systems Study and Methods Improvement' at M/S HALDIA PETROCHEMICALS LIMITED, Haldia, West Bengal.
* 'Work Norms, Manpower Planning and Energy Audit' at M/s DUAL RINGS PRIVATE LIMITED, Nacharam, Hyderabad
* 'Capacity Assessment and Methods Improvement' at M/s BMF BELTINGS LTD, Patancherru, Hyderabad.
* 'Performance based Incentive Scheme' at M/s ANDHRA PRADESH HANDICRAFTS DEVELOPMENT CORPORATION LIMITED, Hyderabad.
* 'Potential Industrial Scan' in KURNOOL DISTRICT.
* Organised 'Energy Conservation Week and National Convention on Quality Circles'.

ACADEMICS:
* M.Tech (Energy Systems) from JNT University, Hyderabad in 2004 with 67.5%.
* B.Tech (Mechanical) from JNT University, Kakinada in 2001 with 65%.
* Intermediate (MPC) from Govt. Boys Jr. College, Kakinada in 1997 with 72.4%.
* SSC from Municipal High School, Kakinada in March - 1995 with 74%.

SOFTWARE:
* C, AUTO CAD, ANSYS 5.4 and Ms-Office.

ACADEMIC PROJECTS:
* 'Performance Calculation and Implementation of 21 MW Gas Turbine and Waste Heat Recovery Steam Boiler', (Six Months) at NFCL, Kakinada.
* 'Heat Exchanger Train for Methanol Reformer integrated with 50 KW Fuel Cell – Design and Scale-up Methodology', (One Year) at IICT, Hyderabad.

EXTRA ACTIVITIES:
* Participated in All India Inter University Sports Tournament conducted by Guru Nanak Dev University, Punjab.
* Participated in Entrepreneurship Awareness Camp Sponsored by Department of Science and Technology, New Delhi.

ACADEMIC ACHIEVEMENTS:
* First Prize in Nation Level Technical Symposium – 2004, Conducted by the Regency Institute of Technology, Yanam.
* First Rank in M.Tech entrance conducted by the JNT University, Hyderabad.
* Paper Presentation in National Level Conference – 2004, Conducted by the Jawaharlal Nehru Technological University, Hyderabad.

* Languages Known: English, Hindi and Telugu.

REFERENCES:
Provided upon request.

Thanking you and looking forward to a favourable reply.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9501 to 9550 of 15477)

Go to Search Parameters...

Brief Description

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

To do maintenance tasks and overhaul all types of mechanical equipment. This includes, but is not limited to, dismantling and stripping equipment, assembling and reconditioning equipment, faultfinding on mechanical equipment and the lubrication of bearings and all moving parts on overhauled equipmen

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

5 years extensive experience in spearheading entire gamut of manufacturing operations in areas of production design & maintenance in automobile ,automotive and packaging machines

Service Technician/Welder

Team work and Good communication skills

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Various Legal and Oil and Gas Administrative Experience

Profficient in surface, mineral and leasehold title research and reporting, lease aquisitions, due diligence, ROW, affidavits, oil, gas and mineral leases and other instruments.

Pipe Welder

Engineer petroleum

Electrical Engineering Manager/ Project Manager

NOV 2006 onwards. Production specialist. Petrofac Dubai

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

Graduated from Poltechnic ITB with GPA 3.05, Skill: Application Analytical of Chmistry, capable gor using GC, AAS,ICP, Petroleum Lab Instrument Oil and Gas

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

Coiled Tubing Supervisor and Mechanical Power Engineer with 5 years experiance in Schlumberge oil filed service company

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

Eight years experience as Planning Engineer/Project Control, with a broad knowledge on project/construction engineering, cost control, and estimating. Experienced in oil & gas industry ranging from concept selection, FEED, EPC, maintenance (shutdown & non-shutdown), and decommissioning

skilled in computer, having good communication skills.

Four years Engineering experience in Oil and Gas Industry. Recently completed Process Technology

experienced in oil refinery operations,tank farm

Analytical mind and Strong numerical skills

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Mechanical Engineer with eight years experience in constuction and maintenance field, Currently Maintenace Engineer in Oil and Gas field. AWS certified Welding Inspector

Skilled in Environmental Impact Assessment

5 years experience as a Mechanical Design Engineer includes project management, generating modeling using Pro-Engineer and determining stress analysis using finite analysis software Ansys 8.0, geometric modeling in Gambit to solve flow and heat transfer problems in Fluent 6.1 and energy-efficient HV

Qualified physician in oil fiel, long experiense in emergencies in remote areas and medevacs by road and by plane, good experience in safety and health risk assesment.

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

HSE SUPERVISOR AND MAINTENANCE PERSONNEL

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

Outstanding Engineer

Qualification: Diploma in Petrochemical Technology Professional Experience: Having11 years experience in Field cum DCS Panel operations in routine operations, start ups, trouble shootings, scheduled & emergency shut down operations of following petrochemical plants. Manufacture of Ammonia: Naphth

Mechanical/piping design experience with knowledge of several CADD tools and computed based softwares use in this field.

Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling

Energy conservation, energy audit

I am currently doing PhD at Osaka City University, Japan. My studies are related to metamorphic rocks. The studies include the analytical works mainly Field mapping, geochemistry, Mineral chemistry and Fluid inclusion

Skilled Engineering Project Manager for multidisciplinary EPCM services for the oil and gas industry, accountable for maintaining good client relations and satisfaction. Positions accountable for safety in design, time and cost/benefit management.

To obtain a Full Time Chemical Engineering, Chemist or Quality Control position starting from February 1, 2003.

An innovative and intelligent Electronic Engineering Graduate who is hardworking, self-motivated and responsible. An articulate and outgoing personality that remains confident and good-humored under pressure especially when meeting tight deadlines set by the oil industry.

My belief, in order to create a safe orientated working environment, the understanding of safe, danger and personnel safety must be mindset into every staff in the organization.

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

I am looking to gain experience at a mine site and go on to develop a career as a mine geologist.

I AM INTERESTED FOR WORK IN OIL AND GAS INDUSTRY-TEAM WORKER-

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Construction Project Manager

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 [ 191 ] 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out