Resume - Hard working Mining Engineer with 10 years experience in underground mine develo...

Misco Jobs

Resume #11423

CONTACT INFORMATION:
View contact information...

POSITION APPLIED FOR:
Mining Engineer

OBJECTIVE:
To be able to work for a reputable company and obtain a challenging position where I will be able to apply my experience for the service as a whole, for the benefits of its clientele and as a professional individual.

WORK EXPERIENCE:
Jun. 2000–Present Mines and Geosciences Bureau Manila, Phils.
Engineer II
Mining Environment and Safety Division
- Conducts regular monitoring of operating mines (underground and open cast) and quarries on proper mining methods, safety and health.
- Conducts regular monitoring of operating mines (underground and open cast) and quarries against adverse effects of mining activities on the environment. Recommends measures to protect the environment against the adverse effect of mining operation.
- Conducts lectures/seminars, information and education campaign (IEC) to concerned mining communities regarding the pertinent provisions of the Philippine Mining Act of 1995 and its Revised Implementing Rules and Regulations.
- Conducts field investigation on illegal mining activities and mining conflicts.
- Conducts periodic monitoring of areas covered by existing mining rights and exploration permits.
- Performs other special duties and responsibilities within the authority of the Mines and Geo-Sciences Bureau that may be delegated from time to time as the need arises.
- Prepares call up letters/correspondences in relation to the abovementioned activities.

Dec. 1997-Jun. 2000 Paramina Earth Technologies Inc. Makati, Phils.
Project Foreman
Underground Mine Development and Production
Philex Mining Corp. Project
Benguet, Phils.
- Implements instructions from the Project Manager and/or from the turn-over reports of outgoing mine foreman and shift bosses inquiring available equipment priorities, manning and other information to assure optimum performance.
- Check excavation headings for ground instability. Instruct and directs personnel to completely scale down loose debris and supervises the proper and effective installation of rock support, if necessary.
- Organizes, assigns and directs personnel in posting of guards on all approaches affected by blasting and inform other personnel working on adjacent areas to secure safe position during blasting.
- Ensures all equipment are retreated to safe distances before blasting to prevent any damage that might result from it.
- Inspects newly blasted face for bootlegs and misfires. Supervises the proper recovery of misfires and cleaning of face if any, to assure it is free from remnants of explosives.
- Make certain the proper and maximum utilization of development and production LHD's. Reports and make request for emergency equipment maintenance and repair when necessary.
- Prepares turn-over report for incoming shift and log all accomplishments during the shift into the provided logbook.
- Makes request for necessary materials and supplies to accomplish the task and follow-up delivery of the same.
- Enforce and ensure that all subordinates assigned to task follow established safety regulations and practices and that they use and protect themselves with personal protective equipment.
- Responsible for maintaining safe working conditions and for installing safe working habits on subordinates. Conducts safety pep talks during start of the shift and monthly safety meetings.
- Ensures proper orientation and training of new employees and develop their skills in accordance with the company policies and procedures.
- Takes corrective action when a work standard is violated and reports serious infractions to superiors. Makes recommendation concerning appropriate disciplinary action. Makes accident report, if any.
- Perform other duties that maybe assigned from time to time.

Apr. 1996–Dec. 1997 Paramina Earth Technologies Inc. Makati, Phils.
Project Safety Engineer
Underground Mine Development and Production
Philex Mining Corp. and Lepanto Consolidated Mining Co. Projects
Benguet, Phils.
- Formulate and submit Annual Safety Program to the Mines and Geosciences Bureau.
- Acts in an advisory capacity as the Safety Program Coordinator to ensure that all directives in the program will be followed religiously in order to have a smooth, efficient and conducive working environment in all projects.
- Responsible for the necessary training, skills assessment, documentation and record keeping to ensure that the registered legal responsibilities are met under Mines Safety Rules and Regulations.
- Collates and review monthly reports submitted by the Project Managers.
- Conducts regular safety inspections and submits report to the concerned Project Managers/Head Office for appropriate actions on safety recommendations.
- Coordinate safety activities and actively participate during local and national safety council meetings and conferences.
- Investigate and analyzes accident/s and recommend action plans to prevent recurrence.
- Maintains up to date safety and accident statistics.
- Submit Monthly General Accident Report to the Mines and Geosciences Bureau.
- Formulate emergency response preparedness program.
- Provides assistance to government agencies in the conduct of safety and health inspection, accident investigation or any other related programs.
- Perform other duties that maybe assigned from time to time.

Oct. 1995–Apr. 1996 Paramina Earth Technologies Inc. Makati, Phils.
Planning Engineer
Engineering Department
- Responsible for the preparation of cost estimates and contract proposals to prospective clients.
- Conducts time and motion studies of various activities in all operations to evaluate existing work systems, including but not limited to formulation of standard in drilling and blasting rounds, mucking and development of heading advances.
- Evaluates and recommends work improvement system to enhance productivity.
- Consistently monitor the actual project operational costs and prepares appropriate estimates leading to claim for contract rate adjustments.
- Collates all project accomplishments reports submitted to the Head Office and make billing reports to clients accordingly.
- Perform other duties that maybe assigned from time to time.

Mar. 1994–Apr. 1994 Marcopper Mining Corp. Marinduque, Phils.
Mine Trainee
- Familiarization with the geology, mining method and milling operation (open pit mining method).

1986–1994 Family Business Laguna, Phils.
Woodcarver
- Part-time job as woodcarver of religious icons.

TRAININGS/SEMINARS ATTENDED:
1. Training on Safety and Emergency Response for DENR Brigades, March 29 to April 1, 2004, Department of Environment and Natural Resources – Region-4 (DENR-4)
2. 4th International Environmentally Friendly Mining, Minerals, Energy and Allied Industries Exhibition and Conference "Towards a Revitalized Minerals and Allied Industries", February 19 to 20, 2004, Chamber of Mines of the Philippines
3. Safety and Health Environment Training, January 30 to 31, 2002, Mines and Geosciences Bureau – Region-IV (MGB-4)/Provincial Mining Regulatory Board-Laguna/Association of Quarry Operators of Laguna
4. 9th Seminar on Environmental Management in Mining, January 24 to 25, 2002 Japan International Cooperation Agency (JICA)-Department of Environment and Natural Resources (DENR)/Mines and Geosciences Bureau (MGB)
5. 46th Annual National Mine Safety and Environment Conference, November 26, 1999, Philippine Mine Safety and Environment Association (PMSEA) and Philippine Society of Mining Engineers (PSEM)
6. Fan Performance and Tunnel Applications, October 1, 1998, Matthews & Yates (UK)
7. EJC 100 Operation and Maintenance Training, September 10, 1998, Tamrock Philippines
8. Environmental Success in Philippine Mining, June 25, 1998, Chamber of Mines of the Philippines
9. 44th Annual National Mine Safety and Accident Prevention Conference, November 27, 1997, Philippine Mine Safety and Environment Association (PMSEA) and Philippine Society of Mining Engineers (PSEM)
10. Dam Engineering Technology, June 4 to 6, 1995, Energosystem & Geosciences, Inc.
11. Power Train Efficiency Mechanical Drive vs. Electrical Drive; Do Biological Connections Exist Between Seagrass and Mangrove Ecosystem: A Case Study in the Philippines; and Pumps for Coarse Solids Applications, April 22, 1994, PIMMGE Marinduque Chapter
12. Safe and Efficient Blasting, January 26, 1994, Philippine Explosives Corp/Orica Explosives

EDUCATION:
1990–1995 Mapua Institute of Technology Manila, Phils.
- Bachelor of Science in Mining Engineering

Examination Taken:
August 1995 Professional Regulation Commission Manila, Phils.
- Licensure Examination for Mining Engineers, Board Topnotcher. License Mining Engineer, registration no. 2553.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8701 to 8750 of 15507)

Go to Search Parameters...

Brief Description

Rotating Equipment Mechanical Engineer

Civil Engineering,Construction Manag., Geotechnical, structure, Design of steel towers

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

I am currently working in a Water Utility Company as a Project Development Manager with exposure in designing pipe network, supervision of pipelaying works, and pipe maintenance, handles customer service operation, and Customer and Billing computerization project.

Looking to join a company that has the need for civil engineer and offers opportunities for advancement.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Electrical instrumental and electronic tecnician with 16 years experiences with very good knowledge mechanical and hydraulical system, Spécialized in open pit mining operation

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Experienced in mining industry equipment, mechanical, electrical, hydraulic skills.

Education: Bachelor Degree in Economics

BE CIVIL, SPECILIZATION IN ENVIRONMENTAL, MDBA

Hard working Mining Engineer with 10 years experience in underground mine development, mine prodution and monitoring including safety, health and environment aspect of underground and open cast mining operation.

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Mechanical fitter, Snr SHE Officer & Mining Eng 2nd year Honours Degree at Leeds University

detail drawings to be prepared from design drawings or from the data available as per site or workshop or offshore, civil steel structural, fabrication, electrical and drainage piping design works experience in India and Saudi Arabia for bldgs, strl towers, elect control panels, factories, furnaces

A results-oriented professional with experience planning and directing executive-level administrative affairs who combines strong planning, organizational and communication skills with the ability to work in an extremely fast-paced environment

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

Objective I am looking for an environment that provides a challenge and growth opportunities. My ideal company would utilize my 15 years of experience in all aspects of the mining industry.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

With a proven record of exemplary senior management, and delivering efficient and productive operations strategies within corporate environments, I am seeking to utilize my comprehensive experience with an innovative and high growth company.

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Drilling specialist and Mech. diesel fitter

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

9 yrs of experience in people management, time management coordination.

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

CNC programming, unigraphics NX4/5, Catia V5, Autocad

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Sales Management Executive providing leadership in hiring, directing, and motivating a sales force consisting of direct / indirect channels in the pursuit of increasing revenue, profitability, and market share.

MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 [ 175 ] 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out