Resume - Discipline – Project Engineer/QHSE Summary Having worked in the Oil and Ga...

Misco Jobs

Resume #1228

CONTACT INFORMATION:
View contact information...

Qualifications

Caledonian University Master of Science; Energy and Environmental Systems.
Including
§    Environmental Pollution and Control
§    Workplace Environmental Management
§    Economics
§    Environmental Law and Policy
§    Thermal and Electric Power Systems
§    Environmental Management Systems
§    Risk Management

    Bell College    HNC Quality Assurance

    IQA    Institute of Quality Assurance Diploma

IOSH    NEEBOSH Diploma (part) modules in Risk Assessment and Safety Technology

    MIQA    Member Institute of Quality Assurance

    MSUT    Member of the Society for Underwater Technology

Discipline – Project Engineer/QHSE

Summary

Having worked in the Oil and Gas industry for over 25 years both onshore and Offshore from Design through the build, pre-commissioning, mechanical completion to first oil and gas. I have been involved in Project Engineering, Project Verification, Engineering support, and HSE contributing to all aspects of these disciplines, from writing and specifying Project Engineering requirements, CTR’s and Integrated Management Systems to implementing the systems for compliance and verification. I have extensive experience in Construction, Material call off, Planning, Onshore / Offshore Interface, Handover and Close out of projects for Fixed Installations and FPSO’s. My present position is that of QHSE Manager – FPSO’s and Deepwater Pipelines.

I have additional experience in critical assessment, risk study and HAZID and HAZOP routines.

I am computer literate working with a variety of databases, including MS Access, Excel, Lotus 123 and other programmes. In addition to this I have experience of statistical quality packages such as Quality Analyst from North West Quality Analysis, risk management packages such as Fig Tree and Sima Pro for life cycle analysis and inventory.

2000 to Present    Intec Engineering Inc – Houston

Position: -    Senior QHSE Engineer

Floating Storage Offshore – Deepwater GoM

Conceptual Engineering - Deepwater FSO in the Gulf of Mexico for the Mardi Gras Marine Transport Option:

Responsible for QHSE on the project and this assignment included:

•    HAZOP and HAZID
•    Environmental Impact Assessment
•    Compliance Standards
•    HSE Planning
•    ESD Philosophies
•    F&G Detection philosophies
•    Active and Passive Fire Protection Philosophies
•    Criteria for Project QRA
•    Project QA

Transferred to the Mardi Gras Transport deepwater pipeline (4500 to 6500 feet). My responsibility is QHSE and the duties include:

•    HAZOP and HAZID
•    Environmental Risk Assessment
•    Environmental Reviews
•    Environmental Reporting
•    Waste Management Procedures
•    Discharge and Emission Mitigation
•    Hazard Register Compilation and Maintenance
•    Regulatory Issues [Environmental]
•    Compliance and Permitting
•    QA project issues

1999 to 2000    Lloyd’s Register Integrity

Position: -    Senior Project Engineer (Asset Integrity) FPSO & Drilling Group

Responsible for the Risk Based Assessments and management of maintenance of inspection strategies, the implementation and execution of monitoring work scopes with regard to process facilities, risers, structures and sub surface structures. To provide support to the Integrity Team Leader, where required, with respect to planning, budgeting and reporting. To provide technical support to the Asset Engineer, operations and maintenance teams, Asset integrity team, corrosion engineers and the Asset Integrity Team Engineering assistants.

    My Primary Duties included:

•    Focal point for the Installation Inspection Engineers
•    Maintain the Structural Integrity Inspection Strategies
•    Prepare and produce mechanical and structural work scopes
•    Manage the execution, reporting and closeout of the work scopes
•    Control and closeout of engineering support with respect to anomaly assessments
•    Consult with the corrosion engineer and the Asset corrosion database with respect to preparing and producing vessel, pipework and structural inspection work packs
•    Manage the implementation, execution and closeout of vessel, pipework and structural inspection work packs
•    Prepare work packs for annual Riser Survey work scopes, manage, implement and issue summary closeout reports
•    Provide support to the Asset Integrity Team Corrosion Engineer with respect to in service failure investigations
•    Responsible for anomaly tracking with respect to progress and closeout corrective actions
•    Monitor areas of expenditure under my control against agreed CTR’s
•    Advise and assist the Project Manager with respect to activities impacting on Technical Integrity
•    Overview planning and budgeting
•    Assist in the updating the Asset Corrosion Management Strategy
•    Assist in developing and implementing measures to identify and mitigate fatigue failure on the Asset

1997 to Jan 1999    Aker Oil and Gas Technology – Banff FPSO

Position: -     Senior QA Engineer- Engineering Support (Design, Build and Commissioning)

As a member of a small client Project Engineering Group, tasked with the expedition of engineering deliverables, the objective of the group was to interface the engineering deliverables, ensuring targets are met for pre commissioning and commissioning priorities, reducing the lead time for the Handover. Ensuring verification and subsea legislative requirements were fully complied with, close out of the Project being successfully achieved, and carry over work was identified, job cards and work packs were put into place.

My achievements within the group have included the authoring of procedures for the Project Handover, Project As Building and the implementation of them. The achieved aims of the procedures have been to ensure that extraneous deliverables were not produced, the As Built phase of the Banff FPSO to the Duty Holder enabling the operational needs for PMR routines.

    My responsibilities included: -

•    Authoring Project Handover and Close Out Guidelines
•    Authoring Project As Building procedures
•    The co-ordination of discipline engineering
•    Ensuring compliance of As Built documentation
•    Timely availability of Manufacturing Record Books
•    Timely availability of Operational and Installation Manuals
•    Vessel Documentation reviews
•    Documentation compliance for Verification
•    Documentation compliance for Vessel Class
•    Key deliverables compliance in the As Built condition
•    Project Close Out requirements are achieved
•    Follow on engineering activities are fully identified

1994 to 1997    Quality Systems Ltd

Position: -    Quality and Environmental Manager

This position was consultancy work, within the Oil, Gas and Petrochemical Industry and related to the implementation of Integrated Management Systems, QMS, SMS and EMS.

    My responsibilities included: -

•    Consultation with engineering businesses to provide Safety Management Systems, Quality Management Systems and Environmental Management Systems for certification to BS EN ISO 9000 and ISO 14000 series
•    Audit current Safety, Quality and Environmental systems in line with QMS and EMS design for the client
•    Setting up Quality and Environmental Systems databases
•    Write and implement Safety Quality and Environmental procedures
•    Implement Safety Quality and Environmental training and awareness
•    Design and implement Statistical Process Control (SPC) procedures

1990 to 1994    JV APG/SALAMIS

Position: -    Project QA Engineer (Engineering and Maintenance support)

The contract was an MMSC contract with Shell in the Northern Fields. The offshore position called for allocation and formulation of job cards and activities, offshore construction, maintenance inspection and certification for 3 platforms, the North Cormorant, the Tern and the Eider

    My responsibilities: -

•    Monitoring of inspection programmes
•    Function test and commissioning programmes
•    Formulation of engineering programmes and plans for all the engineering and maintenance scopes of work
•    Reviews of all new work packs and job cards
•    Procedure test packs, certification packs and reporting progress for final system handover
•    The compilation of OIM’s, MRB’s and data record books for the asset owners
•    Authoring Project Handover and Close Out Guidelines
•    Authoring Project As Building procedures

1988 to 1990    Crosby Holmes Ltd

Position: -    Vendor Project Engineer QA

The company activities included, mechanical, valve, pressure vessel, pump and pipework installations and modifications for clients on and offshore. Contracts included Ince B and Fiddlers Ferry power stations, the BP Bruce SSIV isolation valves and steelworks projects.

My responsibilities included: -

•    Vendor appraisal
•    Procurement to predefined requirements
•    Monitoring of inspection activities
•    Vendor audits and assessments
•    Formulate quality procedures and plans
•    Monitor receipt inspection activities
•    To ensure the update of document and client specification and liaison with client and certification authority
•    The compilation of document handover certification

1984 to 1988    UIE Scotland Ltd

Position: -    Construction Project Engineer

The areas of responsibility at UIE, was construction scheduling, meeting construction and contractual milestones, planning and interfacing, competency issues, inspection activities, vendor appraisal and material procurement to project requirements.

My duties included: -

•    The writing, the definition and implementation of fabrication and erection procedures and systems to client specifications and requirements
•    Programming controls and inspections throughout stages of fabrication
•    To support the certification department in dealing with discrepancies
•    The departmental responsibilities provided for material traceability, ensuring that test procedures and inspections were correctly carried out
•    Monitoring ultrasonic testing and NDT
•    Final acceptance of radiographs and the verification of welder qualification
•    Certification close out prior to sail away

1981 to 1984    BP Magnus

Position: -    Project Engineer (Engineering support)

•    Review of work packs and job cards
•    Specifying of equipment and material for procurement to project specifications
•    Organizing systems for DCC
•    Planning inspection regimes and arranging mobilizations of personnel
•    Vendor appraisal of competence

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 15508)

Go to Search Parameters...

Brief Description

Experienced onshore/offshore subsea installation and construction manager

Commissioning Manager/Operations/Construction

Discipline – Project Engineer/QHSE Summary Having worked in the Oil and Gas industry for over 25 years both onshore and Offshore from Design through the build, pre-commissioning, mechanical completion to first oil and gas.

Looking for offshore employment

Date of birth 19th Oct 1949,Pakistan

I have been working in the construction field since 1972. I have extensive knowledge in construction of residential and commercial buildings.

Electrical supervisor for oil and gas industry.

Permanent (long term) employment in the construction industry. Equipment Manager or Master Mechanic position.

Have gained experience offshore on FPSO with minimum manning policy, hoping to develop this experience further.

Highly diversified, knowledgeable, creative, adaptable and people-oriented technician with over twenty-three years of experience in the oil/gas, precious metals, industrial minerals, coal and land surveying business. A great deal of domestic and international project experience.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

Looking for position as Rig Superintendent on DP Vessel or Semi(Worldwide).

i live in Pakistan now is my age 50 years old I want to work on Qater as a a/c technician.

30+ years Underground Silver, Gold, Lead and Zinc mining. Supervisory in Production, Development and Construction.

Having experience in Maintenance and Management of large Caterpillar Equipment working in Copper Open Cast Mining. I am extremely confident that with my experience, I can do a thoroughly professional and highly efficient job in any related assignment.

* 25+ YEARS EXPERIENCE IN THE OIL & GAS INDUSTRY * PAST MANAGMENT POSITIONS * CERTIFIED INSTRUCTOR OF VARIOUS SAFETY COURSES

Miner with twenty-three years experience seeks employment.

20+ years oil/gas experience. Drilling/completions supervisor, environmental/regulatory/safety specialist. Worked in Rockies, Permian Basin, Anadarko Basin and East Texas on wells from 2,000’ to 23,000’.

Worked in oil fields for 22 years - from floors to tool pushing. Am presently looking for a position in the United States or overseas.

Mechanical superintendent/equipment manager skilled in all aspects of mining equipment, preventative maintenance, purchasing and procurement of equipment and parts, and the hiring, training and supervision of mechanics.

To be considered for a responsible position such as, but not restricted to, a plant manager, project manager, operations and maintenance manager and/or a mobilization manager in either the utility and/or petroleum sectors.

30 years experience: project development -- operations management. Experience: alternate delivery -- design/bid/build; design/build; CM@Risk; program management. Work type: direct hire and subcontract management. Profit and loss responsibilities. Will relocate domestically for right opportunity.

Hi Please consider my resume for future construction Procurement positions.

I would like to continue my career in the Mining industry or other heavy industry with an organization that will utilize the mineral processing and leadership skills I have gained in leading both the operation and maintenance of world class mining companies.

Equipment Maintenance Manager with extensive experience in the repair of all major plant and heavy equipment (open pit/underground.). I am a Journeyman Electrician with both open-pit and underground experience. My Mine Foreman and Mine Examiner Certificates are from Wyoming and are current.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Drill Stem Testing, Downhole Tool Supervision, Packers, Open-hole, Cased-hole, Driller, 4-Point Testing, Heavy Industrial Manufacturing, Computers, etc. These are just some of the areas in which I have a solid background in.

I wish to be considered for a senior engineering or mine management position in an open pit mining environment. I am willing to work overseas, but would prefer a residential placement where I could bring my family.

proven TEAM leader who can mentor, motivate and improve the functions of all depts. Excellent references to include the CEO, Presidents and Vice Presidents hands - on type of manager with a strong mechanical, customer, quality and administrative background. Total P&L resp.

My resume summary containing the interest letter, my contact information, education and information about my background and skills.

Experienced offshore hand with mechanical and electrical background looking to re-enter the oil field. Recently completing a course in Technical Limits, an efficiency program to help manage and facilitate supervisors, and workers alike to improve overall performance of the well program.

A highly motivated technician experienced in a broad range of disciplines. An effective communicator at all levels, adaptable and dedicated with proven record in maintenance, installation, management. An enthusiastic and ambitious achiever promoted by examination and personal recommendation.

I have a college degree in construction management, general construction estimating, plan reading and technical information, project and job site management, codes norms and regulations, health and job security, employee relations, construction law.

I am a Journeyman Electrician with both open-pit and underground experience, Worked as Lead Hand and Acting Boss as required. I'm looking for a remote fly-in job, or an ex-pat position.

I am a Journeyman Heavy Duty Mechanic with supervisory experience. I am looking for overseas employment preferably contract work. I have some computer skills which include MS word, excel, access. I have developed and implemented preventive maintenance programs which proved very successful.

I have 22 years experience in the oilfield I have drilled for 7 years pushed tools for 2 years and have been a directional driller for the last 2 years. I have app. 12 years overseas work and 3 years offshore.

Drilling Subsea Engineer with a wealth of experience.

Seeking an opportunity in the petroleum market in which my skills, strong dedication and technical abilities will benefit a progressive energy company.

I am a certified Maintenance Manager. While in the military I have operated numerous battalion maintenance facilities, trained personnel and foreign troops in several fields and was the NCOIC at the embassy in Dar EsSalaam, Tanzania.

16 years experience in gas distribution, wet utilities, general construction site work and excavation 25 years experience in oil & gas pipeline and plant construction. Dependable, self-motivated, organized, accurate and very detailed, hard working and results driven

Operations Commissioning Petrochemical Oil Gas experience. 29 Years In Industry

Extensive Oilfield knowledge and experience in all categories of more than 20 years. Worked offshore for the last 15 years as a crane operator but am not limited to that.

21 years in construction

To obtain a career in supervision or management with a growth oriented organization that will allow me to utilize my expertise in the areas of retail or safety management and administration.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

Am looking for a possible job within the same field or fields that I have been training and worked in with the potential of growth and further education. I’m willing to travel within or out side the US for short or extended terms if needed for the positions. Depending on the pay.

Multi-skilled Individual seeking long term employment with company that has stability, and is committed to caring for its employees.

I have 20+ years of experience in the EPC arena, specializing in Project Controls. I have extensive experience in CPM , EVM & ERP. I have 14 years of experience with Primavera Software (administrator & superuser with Primavera P3, P3c, P3e & Teamplay).

British gas approved Grade-2 Painting Inspector since 1995 having over 20 years experience in Oil/Gas industry. Worked in Oman/UAE/Qatar as Painting Inspector cum Supervisor for Major construction and Service Contracts involving Major shutdowns.

Heavy Equipment Maintenance Manager with extensive experience in the repair of all major plant and heavy equipment (open pit/underground.)

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out