Resume - I am a Mechanical Engineer with Master degree in Mechanical Engineering,

Misco Jobs

Resume #1270

CONTACT INFORMATION:
View contact information...

PRESENTATION:

Dear Sir.

I would like to apply for the post advertised on your web page. I am a mechanical engineer with a Master degree in Mechanical Engineering (Msc), my mother tongue is Spanish and I have a good standard of spoken and written English.

My previous experience includes giving advice in mechanical design with the most important Finite Elements Analysis (FEA: Nastran and Patran) and other simulation stress and strain softwares (more than 6 years), I can also use the most importants Computer Aided Design (CAD: Mechanical Desktop and pro/ENGINEER).

I am specialist in hard metals and have good skills in chemical processes, metallurgy techniques and Electronic Microscopy (SEM) and have worked and made publications in the most important Petroleum Company in Venezuela (PDVSA) about mechanical design on Drilling equipments, selection and studies of new drilling system for specific places, planning and supervision of major overhauls and maintenance of drilling equipment, I have worked in drill bit design in one of the best Venezuela´s company manufacturer of drills bits.

I can work in Field or R&D departments. , my field experience includes selection, design and studies of new drilling systems for specific areas, planning and supervision of major overhauls and maintenance of drilling equipment, I have experience of development projects, early phase value assessment of subsea installations/systems, marine operations or drilling and well operations. Finally, I have worked in drill bit design and complex mechanical components for one of the best company manufacturers of petroleum drill bits and core bits, also I have worked in Environmental Engineering for INTERPROIL in application of techniques in drainage and recuperation of hydrocarbons in petroleum pits and water treatment

I have good communication skills; I am professionally responsible, confident and enthusiastic. I also have Basics communication skills in Italian, German and French.

You can see part of my works like R&D engineer in my web page

I enclose a CD copy of my CV.

I hope my application will be considered favourably and look forward to hearing from you.

Nationality: Venezuelan.
Profession: Msc. Mechanical Engineer.
Age:     30 Years old.
Marital Status: Single.
Born: 4 July 1971

I am a Mechanical Engineer with Master degree in Mechanical Engineering, my previous experience includes giving advice in mechanical design with the most important Finite Elements Analysis (FEA: NASTRAN and PATRAN) and other simulation stress and strain softwares (Over 7 years experience), I am proficient in the use of Computer Aided Design (CAD: Mechanical Desktop and pro/ENGINEER 2D and 3D modeling). I am a specialist in the use of hard metals for oil industries and I have solid experience and knowledge of chemical processes, metallurgy techniques and Electronic Microscopy (SEM). I have worked and made publications in the most important Petroleum Company in Venezuela (PDVSA) about mechanical design, my field experience includes selection and studies of new drilling systems for specific areas, planning and supervision of major overhauls and maintenance of drilling equipment, I have experience of development projects, early phase value assessment of subsea installations/systems, marine operations or drilling and well operations. Finally, I have worked in drill bit design and complex mechanical components for one of the best company manufacturers of petroleum drill bits and core bits, also I have worked in Environmental Engineering for INTERPROIL in application of techniques in drainage and recuperation of hydrocarbons in petroleum pits and water treatment.

October \1988-December\1993University. Certificate Obtained: Mechanical Engineer
Instituto Universitario Politécnico de las Fuerzas Armadas Nacionales. IUPFAN (qualification 7,11/9)
January\1995-May\1999 Magister Scientarum on Mechanical Engineering (Msc) Simón Bolívar University. USB (qualification 4,39/5).

CERTIFICATE OF COMPLETION: Analysis and Mechanic Design
1.    Course of CNC for turning and milling machine of numeric control. Instituto de Ingeniería.
2    Course of pro/ENGINEER V.17, Basic. AT-Group. Mechanical Computer Aided Engineering (MCAE) and Computer Aided Design (CAD)
2    Course of Software: Nastran for Windows V 2.0 (FEA: Finite Elements Analysis). AT-Group. Software for analysis and simulation of Stress in mechanic systems.
3    Advance course of Working Knowledge into Mechanical Desktop 4.0. (CAD and FEA). Abstract Group.
4    Advance Course of software PATRAN (FEA). INTEVEP.
5    Advance Course of AUTO CAD 12 2D – 3D. Instituto de Ingeniería
6    Advance course of Mechanical Desktop 4.0 (CAD), Abstract Group.
7    Advance course of de Visual Nastran 6.2 (FEA), Abstract Group.
8    Management of Microsoft Word, Excel, Power Point, Windows 2000, Windows 98 - 95, Windows NT, UNIX, Tools in FEA analysis, Tools in design CAD and others.
9    Knowledge and management in network and computational equipment, Hardware and Software, INTERNET, Visual Basic 6.0 and several graphic design software.

Abstract is a Training Center from Autodesk.
AT-Group is a Training Center from Parametric Technology.

Environmental engineering
“Problems and solutions for management for Oil waste spill”. INTEVEP
“Estudio del impacto ambiental de derrames petroleros”. INTEVEP.
“Management of toxic waste for petrochemical industries”. INTEVEP.

Chemical and processes
Evaluation in Landfarming process: recuperation of land from petrochemical wastes. Universidad Simón Bolívar USB.
Process in Biorremediation. Universidad Simón Bolívar USB.
Course of Characterization and improvement of petroleum. INTEVEP.
Course of physical and chemical process on treatment and improvement of petroleum. INTEVEP
Mechanic and chemical process of separation in petroleum. INTEVEP.
Course of water analysis. ADVANCE.
Course of management of spectrophotometer DERL 2010. ADVANCE.
Analysis of oil and full oil. Venemaica.
Processes of treatment of water. ADVANCE
Course of Chromatography de gas, Instituto de Ingeniería.
Course of espectrofotometria, Instituto de Ingeniería.
Electronic Microscopy (SEM), Instituto de Ingeniería.

Management and projects control.
Economical evaluation of projects. Instituto de Ingeniería.
Management and control of projects. Instituto de Ingeniería.
Projects evaluation. Instituto de Ingeniería.
Management of staff. Instituto de Ingeniería.
Technical evaluation of projects. Instituto de Ingeniería.

Experience in Brief

INTERPROIL. (Engineering Area and Mechanical Design).
    From: January/1997 To: MARCH/2002
Area: Research and development in mechanical complex components for petroleum industries, manager of basic and conceptual engineering (project manager).

DIAMOND BITS AMERICA, DBA. (Venezuelan company manufacturer of Drill Bits and Drlling operations)
    From: February/1998 To: March 2002
Main responsibility Stress analysis engineer, specialist with CAD and FEA technique, adviser on tungsten powder and hard metal application.
Area: Specialist in hard metals, carbides and diamonds, specialist in design and analysis with CAD and FEA software for system and sub system design, destructive and nondestructive tests, failure study in mechanical components, research and development in special mechanic components for oil drilling industry, application of PDC (Polycrystalline Diamond Compacts), planning and supervision of major overhauls and maintenance of drilling equipment

FUNDACIÓN INSTITUTO DE INGENIERÍA (Center of Research and Development for National Industries)
From: April/1993 To: August/1998
Main responsibility Engineer in Research and Development
Area: Specialist on: Mechanical Computer Aided Engineering (MCAE), Computer Aided Design, (CAD) and specialist in Finite Element Analysis (FEA), Modeling in 3D, Stress analysis with FEA techniques, Design of specials and complex components, Failure analysis, hard metal specialist, research and development engineer, simulation of mechanical parts, management of projects on research and development.

INTEVEP - PDVSA. (National Center of Research and Development in Venezuela).

Main responsibility Work of degreed with the HDHTM project on treatment of heavy weight hydrocarbons in mechanical engineering area.
Area: Assigned to Center of Design Modeling and Simulation (CDMS), INTEVEP - PDVSA, worked with CAD, FEA and CFD Software, Modeling on 3D. Development of Pressure vessels and letdown valves for control process in HDHTM system. Works Published on the main database of PDVSA.

LANGUAGE SKILLS.
Spanish: Mother tongue
English: Good. Studies in Brighton England.
German: Basic.
Italian: Basic..
French: Basic.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5851 to 5900 of 15509)

Go to Search Parameters...

Brief Description

Process Engineer (Chemical Engineering)

To seek holistic and enriching exposure in the field of technology and management with an organisation that is dedicated to say in the forefort of excellence.

I have over twenty years of experience, comprising of mechanical, piping and HVAC design, project management, construction supervision, mechanical systems startup and commissioning and board /computer drafting including PDMS, Intergraph ISDP 3D, AutoCAD and FLEX CAD on various marine, offshore pet

Ph.D in Biotechnology with experience in biological control seeking a suitable job in R&D or Production

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

A management position in a results-oriented company that seeks an ambitious and career conscious person, where acquired skills, experience, and education will be utilized toward continued growth and advancement.

Safety Pro with a wide range of experience in the oil and gas sector both on and offshore

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

I have degree in Civil engineering and 6 years experience with Oil & Gas Industry(Kuwait,Qatar,U.A.E,Georgia).I have valid driving licence of Qatar/U.A.E/Oman.Execution of Pipe rack foundations,Static/Rotary euipment foundations,Turbine,Boiler,Flare foundations, Control bldg and Sub station bldg.

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

• Over 15 years of experience in Petrophysics (Exploitation and Reservoir characterization)in clastic and complex carbonate reservoirs. • Detailed experience of acquisition, quality control, interpretation and evaluation of petrophysical (wireline, LWD and core) data.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

Chartered Accountant

Anywhere that needs help in storage, treatment, or disposal needs for hazardous waste, wastewater treatment, remediation, air quality issues, or safety in the workplace.

Over Fifteen years experience in the execution, engineering, tendering and management of offshore construction projects in the Middle East Asia, India and Caspian Sea regions at various levels of responsibility within the organization.

Geological modelling, Vulcan expert user, JORC reporting Project management Quality control, reconciliation RC/diamond/environ drilling, remote exploration Tenement applications Contract/tender documents, capital justifications Traditional Owner liaison Training indigenous people (military)

Fifteen years in human resource (HR) leadership roles. Certified by SHRM as a SPHR, MBA with experience administering/interpreting HR policies and developing/implementing innovative people practices to increase profitability. Certified Team Leader/Facilitator and TQM Tools Trainer.

Seeking a challenging and rewarding Chemical Engineering position with a progressive company.

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Engineer with 14+ solid years of domestic onshore and offshore O&G experience; drilled or lengthened 30+ horizontal wells; expertise in cost control, field practices, safety training, RRC permits and reporting

Public Relations Officer

Chemical Engineer w/15 years experience in environmental compliance, waste management, environmental permits, ISO14001, and safety (HAZCOM) training.

handle the Project Independently, Installation Instruments* Loop Checking* Site Design *F&G System *Pre Commissioning Activities Erection of DCS,PLC *Knowledge of Analyzer System *Experienced in Senior levels *Good Leadership quality *Good interpersonal relationship

Underground and surface mine development, construction and operations. Mechanical engineering background, involved in maintenance and efficiency studies of mining equipment including excavation and haulage systems. Overseas experience.

I have fifteen (15) years of professional experience in Project Control activities as a Senior Planning/Scheduling/Control & Cost/Contracts Engineer in multidiscipline projects. My experiences have been in the Oil & Gas Industry, Infrastructure Development and Building Construction.

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

pipelines engineer, mechanical engineer

I am presently working as a field service representative for Ecolochem International,Inc. Presently assign in an Onshore Gas Plant for Shell Exploration Philippines. I work also as a assistant driller for Sedco Forex Sclumberger.

AS MENTIONED ON THE RESUME BODY COMPLETE AND UPDATED

I am a Mechanical Engineer with Master degree in Mechanical Engineering,

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

Objective Secure employment in the petroleum industry working in reservoir exploitation, well planning, and/or completion operations.

Experienced Contracts Engineer with more than 15 years of experience

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

PhD candidate with experience in hardrock and softrock

plant operations/project management in power, petrochemical industry

Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My responsibility is Panel operaton.

Coil Tubing/ Petroleum Engineer/Supervisor )

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

I've 16 years experience in oil and gas field as mechanical engineer with Sonatrach oil & gas company and as maintenance mechanical supervisor with ADMA-OPCO Offshore AbuDhabi.

I have 15 years experience inpetrochemical plant.

To secure a challenging position in an environment which provides opportunities on acquired expertise and experience as well as a position with career growth potential in a competitive aerospace.

Responsible all electrical installations, wiring, piping, motor control

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 [ 118 ] 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out