Resume - QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, tran...

Misco Jobs

Resume #12811

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

A position in QA/QC/NDT training or management. Heavy overtime desired.
Will travel. Overseas assignments of one year or more highly desirable.

SUMMARY:

Over twenty-five years experience in QA/QC/NDT in the heavy construction fields of: structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate - Advanced training in management through Leadership Management International (LMI) - Excellent communication skills - CTM in Toastmasters International - A skilled trainer, public speaker, and writer.

EXPERIENCE:

JULY 04 to SEPT 04 Cardinal Football Stadium, ATL, Inc., Phoenix, AZ

Appointed QA Manager on the construction of a new all-purpose stadium with a retractable roof and playing field. Laid off due to company's loss of their contract.

JAN 03 to JUNE 04: QA Manager, New Convention Ctr., San Juan, PR
On contract to Moody International, Houston, TX
QA Manager on a new $billion, 600,000 sq. ft., convention center in "The Golden Triangle" area of San Juan. Supervised five inspection personnel - Wrote the Site Execution Manual consisting of ten site procedures - Responsible for the documentation of all inspections and non-conformances - Attended weekly construction and pre-construction meetings – Responsible for enforcing AWS codes (D1.1 and D1.3), drawings, AISC requirements, contract specifications and safety program. Contractors: Amer. Bridge (erector) & Hardin/QB (Constr'n. Mgr.)

JULY 01 to June 03: QC Inspector on the new adult and juvenile correctional facilities in Phoenix, Arizona.

AUG 00 to JULY 01: QA Seismic Bridge Inspector for San Fran Bay area, CA
On contract to Cal Trans
Performed source inspections on bolt assemblies, rebar installation, structural steel component fabrication and other materials. Also, performed surveillance of in-process welding, pile driving, coatings applications, bolting, and concrete pours related to retro-fitting of bridges by the state of California.
JUNE 99 – June 00: Sr. NDT Instructor for Saudi Aramco, Dhahran, Saudi Arabia. Designed training materials based upon principles of "Training by Objectives" and Saudi Aramco training standards. Also, performed classroom training in PT and MT NDT test methods to Saudi Aramco inspection and engineering personnel. Duties included administration of qualification tests. Attended Saudi Aramco's Trainer Workshop Series of classes on Training by Objectives. Certified as a Senior NDT Instructor by Saudi Aramco.

JUNE 98 – JUNE 99: Lead inspector on the Miller Park Stadium's retractable roof project, constructed by Mitsubishi Heavy Industries America, in Milwaukee, Wisconsin. Responsible for inspection of welded steel components and repairs of failed welds fabricated in Mainland China. Duties also included supervision of repair personnel; performance of UT, MT, and PT testing; and surveillance of welding per AWS D1.1 requirements.

OCT 91 - MAY 98: Cross-Cultural Training Specialist for the China Productivity Center, Taiwan's premier business consulting firm in Taipei. Duties included designing and teaching courses to assist personnel of international companies to improve globalization efforts. Later, appointed Project Manager of the new Department of Internationalization in the World Trade Center Taichung. Was concurrently the exclusive recruiting agent for Western International University, a fully accredited graduate school located in Phoenix, Arizona. Speech writer for mayor of Taichung. Also, designed promotional product brochures.

JULY 90 - JULY 91: Site QA Manager for NUC (Nuclear Underwater Constructors) on the re-rack project at the Kuosheng Nuclear Power Generating Station in Chin Shan, Taiwan. Was responsible for administration of the QA program per 10 CFR 50 requirements. Managed QC and NDT personnel and acted as liaison between contractor and client. Performed procedure writing, documentation control, as-building of drawings and resolution of quality related problems. Also, worked as a volunteer English teacher to Kuosheng personnel to promote good relations between client and contractor.

APR 85 - JULY 90: CONTRACT ENGINEER on numerous ambitious
Heavy-construction projects as follows:

QC Engineer on contract to GE Nuclear Energy (GENE)
Oyster Creek Nuclear Station, Forked River, New Jersey
Responsible for compliance surveillance and coordination of activities related to modification, repair and maintenance of re-circulation valves, hydraulic control units, control rod drives, and main-steam isolation valves. Also performed welding surveillance, documentation review, hydrostatic testing. (13R Outage)

Field Engineer on contract to Amspec International
Hess Oil Refinery, St Croix, USVI - Maintenance Shutdown
Performed the following: Isometric drawing walk-downs; visual weld inspections; welding surveillance and NDT of newly completed welds; and, UT thickness gauging of in-service piping, components, and vessels.

QC Inspector on contract to H. C. Price Co.
Prudhoe Bay - BP Exploration Co. - Maintenance Shutdown
Performed surveillance and final inspections of welds related to piping and related supports; administered welder qualification tests, bolt torque verification; and, hydrostatic testing of piping sub-systems.

QC Engineer contracted to Law Engineering for APS
Palo Verde Nuclear Station, Wintersburg, Arizona
Responsible for ensuring the integrity of structural beams and columns to be used in the construction of three new Command Control Centers. Authorized
Inspector of record for all welding related to column splices, moment connections and beam welding.

QC/NDT Inspector for Sergent, Hauskins and Beckwith
Casino/Hotel renovations and expansions in Reno, Nevada
Authorized Inspector for structural steel erection on statically loaded building additions per AWS D1.1 requirements. Also, provided UT inspection of all moment connections, column splices and beam connections.

Start-up Engineer on contract to Caltest for APS
Palo Verde Nuclear Station, Wintersburg, Arizona
Cognizant Engineer responsible for field surveillance walk-downs during low power operation for detection of design problems that be detrimental to safe operation of the plant under full power. Also, performed Hot Functional Testing, Steady State Vibration, Dynamic Transient Testing, drawing walk-downs, and documentation review. Later, part of a team assembled to process data from the start-up testing phase into a usable baseline profile.

AUG 83 - APR 85: Field Engineer on contract to Tech Aid Services
Diablo Canyon Nuclear Station, Avila Beach, California
Member of a special engineering team assembled to upgrade large bore piping and related supports, rupture restraints, snubbers and hangers to meet newly established seismic requirements. Duties also included as-built drawing review for verification of existing conditions. Was later assigned to a task force to expedite resolution of discrepant documentation items in preparation of N5 requirements for licensing.

OCT 77 - JULY 83: QC/NDT Inspector on contract to WPPSS
Hanford Nuclear Reservation, Richland, Washington
Responsible for certifying the integrity of completed welds related to ASME code class piping, components, and pressure vessels including NSSS, Reactors and steam generators. Supervised in-process welding to assure adherence to controlled procedures. Verified compliance related to materials trace-ability, filler metal control and cleanness requirements. Also, performed surveillance of final settings of large vessels. (i.e. - reactor, steam generators, etc.)

RECENT ACCOMPLISHMENTS:

* Solo bicycle trip from Prudhoe Bay, AK to San Diego, CA (4300 miles).
* Sr. NDT Instructor, Aramco Oil Co. Saudi Arabia.
* Visiting Professor at three Taiwan universities: Shih-Hsin, Tong Hai, and Taiwan Culture University.
* Very active in the Toastmasters (TM) movement in Taiwan and Saudi Arabia: creator and Charter President of the CPC TM Club in Taipei - Secretary, Public Relations VP, and Newsletter Editor of the Prestige TM Club in Taipei; Newsletter Editor for the Beast TM Club in Taichung; and a member of the Oasis TM Club in Dhammam, Saudi Arabia.
* Exclusive Recruiting Agent in Central Taiwan for Western International University, one of the leading graduate schools in Phoenix, Arizona.
* Writer of a paid monthly feature article for Strategic Productivity Magazine,
* Contributing editor, The China Post, Taiwan's English language newspaper.

PAST PROJECTS:

* Cardinal Football Stadium, Phoenix, AZ
* New Convention Center ($billion and 600,000 sq. ft), San Juan, Puerto Rico
* Saudi Aramco Oil Company, Training and Development Group
* World Trade Center, Taichung, Taiwan
* China Productivity Center, Taipei, Taiwan
* Miller Park Baseball Stadium retractable roof project, Milwaukee, Wisconsin
* Las Vegas casino construction (Venecian, Excalibur, Luxor)
* Fifteen Nuclear Power Generating Stations:
Construction: Beaver Valley; Calvert Cliffs; WPPSS units II, III, and V (at Hanford/Satsop); Shoreham; and Diablo Canyon.
Maintenance or special projects: Oyster Creek; San Onofre; Dresdin; Zion; Trojan; Palo Verde; Plant Hatch; Kuosheng II
* Hess Oil Refinery in St. Croix, USVI (world's largest petroleum refinery)
* Alyeska Pipeline Project, three tours of duty during construction
* Prudhoe Bay Oil Field processing facility on the north slope
* Hanford Nuclear Reservation - 100N and 300N areas - "Q" Clearance
* Kuosheng Nuclear Power Station, Taiwan - Spent Fuel Re-rack Project

MISC:

5'10" - 190 pounds - excellent health - passport current - Speak, read, and write Spanish and some Mandarin Chinese. Possess an intimate knowledge of Chinese, Saudi Arabian and Mexican cultures. Extensive travel in 30 countries in the Middle East, Far East, Latin America (including ten Caribbean Islands), and Kenya, Africa.

EDUCATION: Four complete years of accredited university studies.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6151 to 6200 of 15497)

Go to Search Parameters...

Brief Description

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I have spent 23 years in the extractive and minerals processing industries.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

Computer knowledge, documentation, teaching, research works and quick learner.

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Exploration Geologit experience in Gold, Base metal Experience

Facilitator for maintenance departments. Business Process mapping, maintenance performance assessment, Installed and directed a successful planned maintenance system that has improved equipment availability and significantly decreased direct operation cost. Meeting federal and state environmental re

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Diploma mechanical eng.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

hold a Bachelor's Degree in Biomedical Engineering ,

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

„Ï 9+ years experience in PRODUCTION FIELD.

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Good organizational & management skills and able to work in team environment and independently.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

Heavy Duty Mechanic

EHS Management Expert with 14+ years of Experience

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

My training as a professional Accountant, coupled with my three years on-hand experience as an ‘Finance / Operations Officer’. (B.Sc Accounting and PE II ICAN)

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

I skill work the wireline logging services onshore and offshore.Experience prepare and maintenance tool pre-job and post-job,rig up and rig down, logging open hole,case hole,production logging,fishing tool,perforating and logging TLC ( logging with drillpipe ).

Senior level Operator with strong computer skills, team building strength, and highly adaptable.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

Primavera P6/P3, MS Project, MS Office

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

GRAUDATE.AND DIPLOMA HOLDER IN INDUSTRIAL SAFETY MANAGEMENT AND ALSO HAVE 6 YEARS 4 MONTHS EXPERIENCE.

NDT level II, piping fabrication and errection, welding inspection etc.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 [ 124 ] 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out