Resume - I have had twenty years experience in the Petroleum Industry ranging from Drilli...

Misco Jobs

Resume #1419

CONTACT INFORMATION:
View contact information...

CAREER OVERVIEW

BRUNEL ENERGY - Bangkok Thailand

JOB TITLE: Well Services Engineer, Subsurface Operations UNOCAL (Thailand) Co. Ltd.

October 1, 2001 - June 30, 2002 9 Months
SUMMARY:

I was hired as a consultant in the Subsurface Operations - Well Services Department for Unocal Thailand. I was responsible for preparing and issuing well work requisitions WWR's for all UNOCAL's asset groups encompassing majority of production platforms in the Bay of Thailand. I completed approximately 162 work requisitions for conventional 3-1/2¡¨, 2-7/8¡¨ slim and ultra slim-hole completion (gas, oil and condensate) wells. These programs were used for water shut-off (tubing patches, cement squeezes, drillable/permanent bridge plug placement), tubing acid clean out, acid stimulation, perforation/re-perforation, swabbing, tubing cutting, single and multi flow meter surveys as well as total well abandonment. Other programs included wireline gauge and tool retrieval requirements using their heavy-duty wireline unit as well as detailed fishing operations using both their 150/250 TN snubbing units. I was also responsible for updating and maintaining their daily operational database for each requisition, I prepared one asset group operation budget for initial perforation and I helped whenever needed to support the junior Thai engineers.

ACCOMPLISHMENTS:

* Assisted in an operational cost saving of approximately $200,000 USD as a result of a change in work requisition from a second programmed subbing/fishing to a tubing cutting operation to retrieve/ eliminate a stuck dummy separation tool.
* Assisted in optimizing the perforating process.
* Updated well database for all the wells as requested.
* Performed multi tasks with all operating and asset groups to co-ordinate all the work order requisitions.

HOUSTON ASSOCIATES LTD. - Bangkok Thailand December 1, 1998 - September 30, 2001 2.5 Years

I worked as a consultant to generate system computer database and accounting system for financial advisor and currency trader. I continued to maintain the system as well as support the process.

SAUDI ARABIA OIL COMPANY LTD. - Saudi Arabia

JOB TITLE: Production Engineer

November 1994 - September 23, 1998 4.0 Years
SUMMARY:

I was transferred from the Drilling Department in Dhahran to field production operations in Udhailiyah.
I was responsible for seawater injection wells that were fed from two seawater injection facilities (WIP-4 and WIP-5). These wells cumulatively injected +1,000,000 BWPD in a portion of the giant Ghawar Field. My duties included forecasting and maintaining daily as well as future injection rates, work over design, acid stimulation programs, flow meter surveying and water flood sweep optimization activities using pressure transient nodal analysis Fekete software for 103 water wells and related pipelines. I prepared, coordinated with the appropriate operating groups, supervised all on-site activities and completed summary reports for all vertical, directional and horizontal wells that required falloff testing for Injectivity index (II¡¨s) analysis, clean-out/back-flow, acid stimulation, work over, flow meter PLT survey requirements as well as anything related to change in configuration of surface piping. The daily injection data PTT received is obtained from solar powered digital flow meters, which is collected once per month and downloaded to the mainframe data system. I provided training and guidance to the Saudi engineers wherever needed. I provided the yearly performance data for each area which was inputted into the yearly management overall field review summary.

ACCOMPLISHMENTS:

* Completed re-evaluation of all well injectivity index's (II¡¦s) which confirmed relative permeability and skin levels. This re-evaluation led further to possible fault/fracture interference in some of the wells, which was later substantiated through new 3D seismic.
* I was able to multi task all the pressure transient analysis's required for all the 103 wells.
* Completed study on multi rate flow meter PLT survey on existing horizontal wells. Conclusion indicated 80% flow went into the first 280 feet of the 2000-ft horizontal lateral section.

JOB TITLE: Senior Drilling Engineering/Operations - Vertical/Horizontal Oil Development

1993 - 1994 1.5 Year

I was responsible for AFE preparation, well design, drilling, completion and pre-stimulation programs prior to production for horizontal well program in the Ghawar and Ras Tanura oil producting fields. Other duties included training Saudi engineering staff, planning, reviewing/updating and generating third party contracts and on-site drilling engineering supervision for all wells programmed.

JOB TITLE: Drilling Engineering/Operations - Exploration

September,13 1991 - October 1993 2.0 Years

I was responsible for AFE preparation, well design (deep high-pressure gas), preparing drilling and testing programs as well as reviewing/updating and generating third party contracts for the exploration program. These exploration wells drilled and tested were located N. W. Saudi Arabia (south of Iraqi Border), Red Sea (Yanbu and Jedda) as well as in Jizan (north of the Yemen border). A total of 11 exploration wells were drilled to approximately +13,000¡¦ TVD (BHT 425 degree F) and evaluated. Other duties included training Saudi engineering staff and on-site drilling engineering supervision for all programmed wells.

ACCOMPLISHMENTS:

* Recommended the use of full bore testing tools in conjunction with casing perforating guns. The introduction of these tools further led to surface readout equipment, which saved operational time, cost and was safer and more efficient for the HPHT wells that we drilled and evaluated.
* Provided support in the modification of the polymer drilling fluid used to handle the extreme high BHT and CO2 content.

GULF CANADA RESOURCES LTD., Calgary Alberta Canada

JOB TITLE: Senior Drilling Engineer
November 1990 - May 1991 8.0 Months

SUMMARY:

Reported to the Manager of the International Operations, responsible for offshore drilling and production in co-ordination with the Exploration and Law Departments. This included liaison with the drilling and production operations department of Asamera a subsidiary of Gulf Canada Resources located in Borneo.

JOB TITLE: Senior Drilling Engineer

July 3, 1982 - November, 1990 8.0 Years
SUMMARY:

I was responsible for assisting in preparing the drilling and testing operational manuals, AFE preparation and on-site drilling engineering for Gulf's drilling activities in the Canadian North West Territories and Beaufort Sea. This included a total of 7 wells drilled onshore (2), offshore (3) and man made drilling island platforms (2). The offshore wells were drilled using Gulf Canada's drilling vessels Kulluk and Molikpaq. During this time I assisted the development for the use of full bore testing tools along with improving multizone/co-mingle perforation using 4¡¨ perforating guns. I assisted in the incorporation of using turbo drills dressed with diamond bits, which dramatically increased the ROP in both the 12-1/4¡¨ and 8-1/2¡¨ hole sections. I assisted in the development of the glory hole bit, which allowed the hole and steel caisson to be drilled and set at the same time.

I was seconded/transferred to Mobil Oil's St John's office to work offshore as an on-site drilling engineer for a one-year period (1983-84) in the Hibernia field. I was responsible for on-site drilling, coring, testing and abandonment requirements for Hibernia K-14 and C-96 the last two exploration wells drilled in the Hibernia field. Both the Smedveg West Venture and Sonat John Shaw two semi-submersibles were contracted to drill these wells. I reported to Mobil's St. John's office during this period.

Gulf Canada Resources contracted the Sonat John Shaw and drilled one exploration well located south of the Hibernia field. I was responsible for the on-site drilling, testing and abandonment requirements for South Mara-C13 well.

ACCOMPLISHMENTS:

* Assisted in generating GCRI's operational procedure manuals for subsea drilling and testing, AFE and third party contract preparation.
* Provided engineering input for the DA (drilling authority) as well as the EIS (Environmental Impact Study) for GCRI's operations in the Beaufort Sea presented to COGLA.
* Prepared and provided input into subsea and onshore drilling and testing programs.
* Obtained drilling engineering on-site supervision experience locations-Canadian Beaufort Sea and offshore East Coast Canada on semi-submersibles, man made islands, drillships, onshore N.W.T. (North West Territories).
* Worked with both 10M and 15M psi. subsea BOP systems.
* Ran Cameron 10M psi. tie back spool caisson system with shear joint in Hibernia. This was a test run system to see the operational capabilities for possible future use in the development of Hibernia.

JOB TITLE: Drilling Engineer
August 13, 1980 - July 3,1982 2.0 Years
SUMMARY:

As a new graduate I reported to the Drilling and Production Operations Department in Calgary. My duties included development of drilling and work over programs to increase gas development in the foothills of the Rocky Mountains (Alberta and British Columbia). After one year I was transferred to the Offshore Drilling and Exploration Department where I was responsible for all Gulf Canada's partner-operated offshore activities in the Beaufort Sea (Dome Petroleum Operator) as well as East Coast of Canada (Mobil and Petro Canada Operators). During this period I spent several months providing on-site drilling engineering support on Dome Petroleum-Canmar drill ships 1-4 in the Beaufort Sea. I attended Gulf Oil Mud School in Houston, Halliburton production training in Duncan Oklahoma as well as Schlumberger School for production and log analysis as well as many other related schools. I obtained and kept it up to date my well control certification and medical training.

STRENGTHS
* Ability to work and communicate both at a management and engineering level.
* Ability to accept, adapt, and help others facility change in the work environment.
* Ability to work calmly, logically, and quickly in priority one high-pressure situations.
* Strong ability to logically trouble shoot complicated technical problems alone or as an ensemble with other employees and departments.
*

BIOGRAPHICAL DATA

PERSONAL Birth date: July 3, 1952 Birthplace: Calgary Alberta, Canada
Citizenship: Canadian Martial Status: Single (Divorced)

EDUCATION 1980 University of British Columbia, Vancouver, British Columbia, Canada
- Bachelor of Engineering in Chemical Engineering

AFFILIATIONS - Association of Professional Engineers, Geologist and Geophysicists
Of Alberta (Registered 24th December 1982).

References will be provided on request.

CERTIFICATES, COURSES AND TRAINING

1. MS WORD Office - Aramco - December 1994
2. Pressure Transient Analysis - FEKETE software Preliminary to Advanced - April 1995
3. MSWIN(95/NT) - Aramco - May 1996
4. UNIX - Aramco - May 1996

I know how to use Schlumberger's perforating software programs as well as Adobe PageMaker, Illustrator, Corel Draw. I have some experience with AutoCAD and Aris drawing software.

WELL CONTROL

Location Date Cert. No.

Bangkok, Thailand October 9, 2002 ---
Dhahran, Saudi Arabia June 13, 1996 ---
September 3, 1994 ---
Calgary, Alberta May 18, 1990 10014
Petroleum Industry Training Service October 17, 1988 1354
June 17, 1985 959
July 27, 1983 089
February 14, 1981 ---

FIRST AID

Location Date Cert. No.

Calgary, Alberta February 15, 1989 24901
Petroleum Industry Training Service March 13, 1985 8232431
February 20, 1981 34195

H2S ALIVE

Location Date Cert. No.

Calgary, Alberta February 20, 1989 12137
May 4, 1982 1058

CERTIFICATES, COURSES AND TRAINING (Cont¡¦d)

FIRE FIGHTING AND BREATHING APPARATUS

Location Date Cert. No.

Dhahran, Saudi Arabia Dec 11, 1997 In House
Udhailiyah Gas Plant October 25, 1995 In House
Calgary, Alberta June 19, 1987 In House
Gulf Nevis Gas Plant July 5, 1982 In House
Halifax, Nova Scotia
Halifax Fire Department November 19, 1983 ---

OFFSHORE SURVIVAL TRAINING - Survival Systems Ltd.

Location Date Cert. No.

Halifax, Nova Scotia October 21, 1983 0043
Dilbert Dunker - Halifax October 20, 1983 ---

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 15478)

Go to Search Parameters...

Brief Description

Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.

OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.

M.Sc with 15 years Laboratory experience in Analytical Lab.

Excavator-grapple, mobile shear, excavation, demolition, scrap handling, stripping, quarry work

Instrumentation technician with 20+ years of experience

I have 32 years of millwright and supervisory experience with gyro and cone crushers,ball and sag mills up to 36 ft. Knelson concentrators, CIL leach systems, gold and copper systems, conveyors, screens, gold refining equipment.

Chief engineer, marine with 14 yrs. of sailing exp.hands on exp. in maintenance of diesel engines,power plants,air conditioining,pumps and turbines.etc.

I am a consultant working for Devon Energy in the Ft. Worth area and have worked for several major oil companies doing directional wells and taking them from start to finish, building locations and put them on production.

Over 30 years as supervisor.

Mechanical Designer with over 20 years experience preparing process piping layouts, hydraulic and pneumatic schematics, isometrics, assembly, P&ID’s, and detail drawings, as well as laying out the placement of mechanical equipment. Adept at performing field walkdowns, surveys, and meeting with clie

10 years as maintenance manager, 10 years in africa. congo, mali. and guinea.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

Working on Marion 8050 and 8200 draglines. Responsible for safe operations, following mine plans and maintenance of machines.

Thirty-One years of experiance in manufacturing

Primavera Scheduler P3 to P6 and certified in P6

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Senior drilling supervisor with 30+ years project experience in remote areas of the world.

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Well Test Engineer HP/HT

Industrial Electrician

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

Electrical Engineer

To obtain a full or part time position as an Estimator with a growing company where my years of experience and professional skills will be utilized

Telecommunications with over 30 years

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I have been in the oil & gas industry for 34 years in working in differenece fields.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

Qualified applicant with years of experience in the material handling related to Oil & gas construction project. I have good knowledge of the methods, materials, equipments and tools used in the petrochemicals projects. Also conversant with ASTM and API specifications

Qualified Experienced Senior Construction Inspector

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I have been working in the mining industry for the past 30 years.

MEP Project Manager, Estimator, Procurement, Mechanical, Electrical, Civil, Plumbing

Qualifications include over 25 years experience in management/supervision positions on various domestic projects and various international projects in countries such as Iraq, China, United Arab Emirates, India, Saudi Arabia, Bahrain and in other locations such as Puerto Rico, US Virgin Islands etc

A result oriented professional with over thirty broad-based years of international experience in the drilling and workover industry. Major strengths in team building, planning, contractual verification, rig design and operational supervision.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

CFO & Treasurer - publicly traded oil & gas & mining company

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

Results driven environmental professional with broad-based experience in consultative sales, project management, and operations administration.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out