Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #15575
next resume »»
CONTACT INFORMATION:
View contact information...
EDUCATION:
2001 * MASc. Environmental Engineering ¡V University of Windsor, Windsor, ON, Canada
1994 * PGD Environmental Technology ¡V Loughborough University of Technology, UK
1983 * B.Sc. Chemical Engineering ¡V University of Engineering & Technology, Pakistan
SKILLS:
Technical:
* Experience in pollution assessment, emission inventories / monitoring process-engineering support, characterisation of sources, receptor and concentration of pollutants, exposure assessment
* Conduct industrial survey, assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.
* Determination of ground level concentrations, effective stack height, emission rate from monitoring data, emission factor and mass balance
* Use of R308 / CAP air dispersion model
* Apply engineering methods for energy /material balances and analyse equipment, process, design parameters and operational parameters
* A thorough understanding of the pollution monitoring and control technologies.
* Knowledge of environmental regulations and quality standards of Canada and EPA's
* Knowledge of application of chemical thermodynamics/ kinetics in the assessment of environmental processes
* Understanding processes, operating parameters of the chemical industry
Communication/Organization:
* Demonstrated skills of project development / management and preparation of technical reports utilising effective written communication skills
* Co-ordinate work details with superiors and review work of staff of environmental engineers, scientists and technicians
* Plan, organise and co-ordinate a variety of technical and general information meetings regarding environmental issues
* Possess interpersonal communication, organizational and leadership skills
* Proficient with a variety of computer software applications such as windows, Microsoft word, Excel, Power point
RELATED EXPERIENCE:
1991 ¡V 1999 Environmental Engineer
2001¡V 2002 Pakistan Environmental Protection Agency (EPA) Islamabad,
Pakistan (Environmental Regulatory Authority)
„X Evaluated and processed permit applications of national and international projects including Power plant, Cement Plants & other Industrial units and coordinated compliance activities to maintain permits.
„X Applied engineering methods for energy /materials balances, to analyze equipment, processes, design parameters, operational procedures to determine environmental and socio-economic impacts of these projects.
„X Designed, coordinated and completed environmental assessment projects including World Bank funded "Environmental Protection and Resource Conservation Project, "Pollution Release Inventory of Industrial Units and SMART program.
2000 ¡V 2001 Graduate Teaching Assistant
University of Windsor, Windsor, ON, Canada
„X Prepared course material, lab instructions, delivered recitations, supervised review sessions of the students, supervised & evaluated the labs work, assisted the supervisor with grading exams, labs, and other assignments and with everyday operation of various courses offered by the environmental department of the university
1985¡V 1991 Chemical Engineer
Fertilizer Manufacturing Corporation of Pakistan
„X Over six years working experience in fertilizers manufacturing environment to monitor daily unit operations, coordinate and provide technical support to ensure proper operation of the plant parameters.
„X Worked as a team member in installation, start up, test run, commissioning of the Ammonia plant.
„X Developed and successfully conducted "industrial pollution control" course designed for experienced plant engineers and middle level industrial managers.
„X Imparted hand¡Von training to process operators/ and technician on Ammonia Plant Operation and its equipment including valves, pumps, compressors, heat exchangers, Cyclone Separator operation.
„X Sampled and analyzed pollutants and other plant parameters of the plant in the Chemical Laboratory.
„X Imparted in house training on Environment and Safety in process industry including attack oil refinery in Pakistan
„X Conducted safety and fire fighting drills and imparted training on the use of fire extinguishers for chemical plants
„X As a member of Safe Operation Committee (SOC), I was responsible for the environment and safety of the plant.
RELATED PROFESSIONAL TRAINING:
2003 * Environmental Site Assessment for upstream oil and Gas industry (course) ¡V University of Calgary, Calgary, AB
1999 * Environmental Assessment & Monitoring Certificate ¡V National University of Science & Technology, Pakistan
1998 * Monitoring Environmental Conditions (International Seminar) ¡V World Health Organization, Damascus, Syria
1997 * Economic Evaluation & Physical Quantification of Environmental Impacts (Workshop) ¡V GIK Institute of Engineering Sciences and Technology Pakistan
1996 * Environmentally Sound Indicators Economic & Social Commission for Asia and Pacific (ESCAP) Bangkok Thailand
1996 * Gas & Liquid Chromatograph Certificate ¡V UNICAM, Cambridge, UK
1993 * Waste water management (Asia Pacific Seminar)¡XSingapore
1992 * Energy Development and Climate Change¡XUnited Nation Environment Program (UNEP) Cairo Egypt
1992 * Environmental Management of Urban Environment¡X Institute of Public administration Malaysia
1990 * Industrial Production, Planning and Control (Course)¡XNFC Training Centre Pakistan
1989 * Industrial Corrosion & Control (Course)¡XNFC Training Centre
1989 * Pollution monitoring & Control (Course) Petroman Karachi Pakistan
RELATED RESEARDH AND TERM PAPER:
* Air Pollution in Windsor as per Pollution Release Inventories
* Environmental Assessment process /Law in Canada
* Environmental Impact Assessment of waste water treatment plant.
* Detoxification of volatile organic compounds by using extractive membrane bioreactor
PROFESSIONAL AFFILIATION AND AWARDS:
* Registration with APEGGA is under process
* Professional Engineer of PEC # CHEM / 1476
RESIDENTIONAL STATUS: Canadian citizen
REFERENCES: Excellent references will be provided at the interview
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 8151 to 8200 of 15509)
Go to Search Parameters...
Brief Description
Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit
I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.
Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining
Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.
I have worked as a Driller and Tour push for the last 27 years.
Coded pipe & pressure vessel welder with valid certification
Construction superintendent/construction manager
Diesel fitter, supervisor, work shop planner
Automation, control engineering in industrial plants
Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.
Area Maintenance Static Supervisor
SCM Logistics and Materials Managment
Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.
ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.
Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.
Dual Post Graduate with Mechanical + Management with 8 years of Industry Experience is looking for fresh chanllenges.
Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation
Asphalt Plant Manager/Foreman 38 years in asphalt production field
Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...
11 years experience in various projects includes design, costing, construction and control. Project support experienced working in fast-paced environmental demand strong organization, technical and interpersonal skills
AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE
Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in
Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.
Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge
Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry
Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge
My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.
Engineering, cadd designer, autocad, microstation
Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.
13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.
project in erection, maintenance and up gradation project of 40 MW power station and
Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "
Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA
i m the student of BS GEOLOGY 7TH semester nd looking for job.
More than 8 years HSE experience.
1yr Apprenticeship in BHEL,Trichy
Desktop technician
Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations
A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.
Highway Laboratory / QC Manager with 25 years experience in materials
marine engineering steam ship,maintenance fitter,malaysia maritime academy
Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.
Electrical and electronics engineering
Metallurgist with heat treatment and quality control exp. as a technican.
Working knowledge of PLC's
A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement
I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.
I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.
Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)
Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I
First
Prev
151
152
153
154
155
156
157
158
159
160
161
162
163
[ 164 ]
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com