Resume - Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years exp...

Misco Jobs

Resume #1754

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
Jan 2004-May 07 Drilling supervisor Lukoil Server in northern Russia. Upgrading Russian rigs with Western equipment and drilling techniques to work under day work contracts. Improvements have been made in mud system equipment, mud, hydraulics, PDC bits and well control. Drilling time has been reduced %30

Nov.- Dec 2003 Chevron/Texaco Drilling supervisor on jackup in GOM.

Sept.-Nov 2002 Petrolog Inc. Lagos, Nigeria Rig Manager for Great Wall Drilling Co. Chinese owned land rig drilling horizontal development holes.

July 2001-Feb. 2002 Drilling Supervisor on semi for El Paso Energy and Fairway Exploration offshore GOM and Turkey.

July 1999-June 2001 ARAMCO Dhahran, Saudi Arabia. Drilling Supervisor and Bit Specialist. Did compressive strenght analysis. Stopped use of PDC bits in hard sandstone and replaced with hard formation, PDC enhanced tri cones. Bit run time was increased from one day to a week with tricones

August 1995- Dec. 1998 Tecpetrol, Argentina. Drilling Supervisor on deep high pressure exploration gas wells in Northern Argentina. Initial holes were exploration with foam and deep high pressure. Deeply involved in bit selection. Killed 5,000 PSI water kick.

November 1993- Aug.1995 Force Energy, Santa Fe, Pennzoil, CNG. Series of Drilling Supervisor jobs in GOM.

Feb. 1993-May 1993 Oxy Oil & Gas, Geoilbent FSU Drilling Supervisor in Russia

May 1991-Sept. 1992 AMOCO Congo, MER Engineering, Canadian Triton, GEMAN. Series of Drilling Supervisor positions in Africa, FSU, GOM.

Nov. 1988-Dec. 1991 Terra Verde Ranch, Athens, Texas. Worked 2,000 acre cattle ranch. Took 27 hours of computer science and Spanish in local JC.

June 1986-Nov. 1988 Ocean Drilling Program, TEXAS A&M UNIVERSITY Shipboard Operations Supt. on DP ship doing deep water coring for National Science Foundation.Introduced use of spud mud to core through unconsolidated sand

July 1985-April 1986 HUFFO Balikpan, Indonesia. Drilling Supervisor Balikpan, Indonesia. Drilling Supervisor. Oil went to nearly $ 10.BBL.

April 1985-May 1978 Tenneco Oil Co.. Lafayette. La. Senior Drilling Engineer and Drilling Supervisor GOM. Wrote original paper on how to drill under drive pipe and not lose returns. Credited with saving one million dollars.

April 1978-Jan. 1972 Continental OIL CO. Houston, Texas. Drilling Engineer and Drilling Supervisor OKC, Norway, Wyoming, Dubai, Scotland and Indonesia.Did a lot of pore pressure and well control work.

January 1967-Nov. 1971 Mobil Oil Corp. New Orleans. La. Drilling Engineer three years in GOM and Drilling Supervisor two years.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 15498)

Go to Search Parameters...

Brief Description

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

MINING ENGINEERING,M.B.A(MARKETING)

Construction project manager

PDS Frameworks, Autocad, Microstation

Well trained geologist in field mapping,structural geology and mineral exploration affairs

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

Mechanical Engineer having 15 years experiance in tubular n flat products of stainless steel like sheets, plates, coils, pipes in ss304, 316, 304L, 316L.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Instrument technician - PLC/DCS programmer

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Management and supervisory skills

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Experience in Pre-commissioning, Commissioning, Startup,Operation and Trouble shooting.Acquaintance in Panel operation. Experience in operating Distillation Columns; Experience in Water Treatment/Waste Water Treatment; Driving HSE performance; Knowledge in Computers and Operating System. Acquainta

I am an independent consulting Mining Engineer based in Perth, Western Australia. I specialize in temporary management replacement, mine design, and mine project evaluation in Australia, Asia, and Latin America. No job is too small and all inquiries will be responded to.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Process economist for complex chemical and metallurgical processes

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

With some 20 years of work experience,my research has focused on fish stock assessment and management. My interests include applied Statistics and ecological modelling to assist in analyses of various aquatic resources. He has a Bachelor in Zoology, and a M.S. and Ph.D in Fisheries.

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

- Head of electron microscopic laboratory (mineralogy, asbestos, x-ray-analysis) - Research staff member (electron microscopy, Material science) - Lecturer (petrologic, ore and electron microscopy, mineralogy) - Research assistant (petrologic and ore microscopy) - Exploration geologist

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

30 years experience in Metallurgical Investigations and Concentrator Operations processing base metals.

Road works

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Mechanical engineer, with 15 years experience in mining mobile equipment maintenance

Proect control enginner cost control and senior planner for EPC projects

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out