Resume - Over twenty-five years of work experience in the Oil, Gas and Petro

Misco Jobs

Resume #17761

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

Overview:
Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry, employed with Exploration and Production Companies, Cost of Service Companies,
Engineering Companies and National Oil Companies in South America, Central America, and North Africa.
Work Experience has encompassed Process Engineering, Production Engineering, Safety
Engineering, Fire Protection, Environmental Conservation, and Loss Control Engineering.
Broad experience and leadership capacity in: design, construction, pre-commissioning commissioning, operations, and maintenance of a variety of oil and gas treating facilities, pipelines and their associated equipment.

REFINERY, OIL & GAS PLANT OPERATIONS, DESIGN and MAINTENANCE
EXPERIENCE:
Employment with Operating Companies and Engineering Firms has provided experience with large capacity refineries, oil & gas plants encompassing a wide variety of processing equipment and gas treating processes. This experience has included design and construction, pre-commissioning, commissioning, start-up, process trouble-shooting, process optimization studies, plant de-bottlenecking, plant revamps and modifications.

A solid founding in refinery, petro-chemical and gas plants equipment, piping and pressure vessel integrity management programs, and project management of plant turnarounds has also been provided through this employment.

Involvement with environmentally sensitive projects has provided insight into the Environment Regulatory Requirements.

PROJECT MANAGEMENT EXPERIENCE:
A solid background in Project Management including the Regulatory Approval process has been provided through participation on several Design and Construction Projects including Refineries, Gas-Oil Separation Plants, Oilfields, Compressor Stations, Oil and Gas Pipelines and Gas Processing Plants.

INTERNATIONAL WORK EXPERIENCE:
Overseas assignments have included North Africa (Libya), Central America (Gulf of Mexico), and South America (Colombia and Venezuela). This experience has provided an exposure to a variety of operating cultures and climates.

EQUIPMENT EXPERIENCE:
Process Equipment: Instrumentation, Relief Systems, Storage, Separators (three phase separators), Fired Equipment, Heat Exchangers, Air-cooled Exchangers, Cooling Towers,
Pumps and Hydraulic Turbines, Compressors and Expanders, Steam Boilers, Absorption
Towers, Distillation Towers

Refinery:

Paraffin (Wax) Plant)
Ethane Treatment Plant
Natural Gas Treatment Plant
Ethylene Plant
Polyethylene plant
Catalytic Cracking Unit

Conventional and Heavy-Oil Handling Equipment:

Slug Catchers, Separators, Treaters, and Desalters, Storage Tanks and Shipping Facilities, Produced Water Treatment and Injection.

Rotating Equipment:
Centrifugal Compressors: 30,000 HP
Reciprocating Compressors: 4,000 HP
Turbo-Expanders: 8,000 HP
Centrifugal Pumps: 1,200 HP
Reciprocating Pumps: 500 HP
Electric Motors: 30,000 HP
Gear Boxes: 30,000 HP
Gas Turbines: 25,000 HP

Pipeline Systems & Equipment:

Scrapper Trap Launchers and Receivers, Oil Pump Booster Stations, Gas Compressor,
Booster Stations,

EMPLOYMENT HISTORY SUMMARY:
2003 – Present: Safety and Process Engineer: Arabian Gulf Oil Company "AGOCO" -
Loss Prevention Department. Teknica UK.
1994 – 2002: Production and Process Engineering Coordinator - British Petroleum
Exploration Company Ltd. (BPX Colombia, BPVenezuela and BP Gulf of Mexico).
1993 – 1994: Senior Project/Process Engineer - Engineering Department. - Distral S.A.
1991 – 1993: Process Engineering Department - Technical Manager - ESSO Ltd.
1990 – 1993: Chemical Engineering Professor - Pontificia Universidad Javeriana
1990 – 1991: Health, Safety & Environment Department Manager - Proficol S.A.
1988 – 1989: Process Engineer for Oil & Gas Treatment Plants - Move Ltd.
1976– 1988: Operations, Process Engineer, Safety Coordinator - Colombian Petroleum
Company "ECOPETROL"

DETAILS OF EMPLYOYMENT:

ARABIAN GULF OIL COMPANY "AGOCO" - Safety and Process Engineer.
Providing information or advice for all the projects in the oilfields regarding organisation, responsibilities, standards, procedures, codes, or regulations on safety and loss prevention engineering insofar as they relate to any project for upgrading, modification, or provision of new plants, equipments and other facilities at all AGOCO locations. Loss Prevention Engineering include: fire prevention, fire detection, fire protection, fire and spill containment, fire integrity of building structures and materials, provision of access and facilities for fire fighting purposes, and of adequate life safety facilities.

BRITISH PETROLEUM EXPLORATION COMPANY LTD. (BPX Colombia, BP Venezuela and
BP Gulf of Mexico) - Production and Process Engineering Coordinator.
Based in the Field Offices at Central Production Facilities in Colombia, Venezuela and Gulf of Mexico. Providing Engineering support to the operations of oilfields, gas-gathering system and several Gas Processing Plants.

Main responsibilities:
- Technical integrity of process design.
- Overall effectiveness and efficiency of process design.
- Capturing and dissemination of process engineering knowledge.
- Managing and reviewing output of conceptual design into feasibility studies, functional specifications, and Basis of Design for utilities related to production and processing facilities.
- Leading identification, creation and/or adoption of appropriate discipline engineering standards, with appropriate consideration of specific international standards and norms.
- Identifying and assessing new technologies and systems to facilitate improvements in design and operability of the process systems.
- Supervising and directing Design Contractors in the selection and design of correct hydrocarbons processes in the project, leading towards optimization in terms of technology, time of implementation and cost. The focus was mainly on mixed fluid gathering,oil processing, gas processing, single and multi phase oil and gas transportation.
- Undertaking technical integrity and HSE reviews/audits.
- Participating in process safety management, including hazard identification and HAZOP
activities.
- Advising on equipment standardization, availability, and sparing philosophies in order to achieve maximum plant operability.
- Verifying and endorsing process simulations.
- Producing and keeping updated the project Basis of Design/Statement of Requirements.
- For selected development schemes, verifying the production of block diagrams, PFDs,
P&IDs, heat, mass balances and process reports.
- Verifying the issuing of equipment lists, data sheets (including sizing of equipment and pipelines for each development scheme) and contributing to cost estimation.
- Contributing to feed a data-base about size, weight, cost and delivery time of major equipment and utilities.
- Leading and directing specialists and engineering contractor studies related to such units.

DISTRAL S.A. Andean Multinational Company – Bogotá, Colombia - Senior
Project/Process Engineer: Acting as the Consultant and reporting to the Client (BPX
Colombia). Several projects regarding design production facilities, Act as lead discipline engineer of projects, managing discipline design teams of designers and engineers.

Typical Work Activities:
- Applying the principles of mass, momentum and heat transfer to process and equipment design;
- Designing, installing and commissioning new production units, monitoring development (i.e. modifications and upgrades), and troubleshooting existing processes;
- Conducting process development experiments to scale in a laboratory;
- Using computer modelling and simulations to design and evaluate processes and operating systems for the manufacture of products;
- Preparing reports, flow diagrams and charts;
- Assessing the availability of raw materials and the safety and environmental impact of the plant;
- Managing the cost and time constraints of projects;
- Supporting the conversion of small-scale processes into commercially viable large-scale operations;
- Assuming responsibility for risk assessment, necessitating hazard and operability
(HAZOP) studies, for health and safety of both company staff and the wider community;
- Monitoring and improving the efficiency, output and safety of a plant;
- Making observations and taking measurements directly, as well as collecting and interpreting data from the other technical and operating staff involved;
- Assuming responsibility for environmental monitoring and ongoing performance of processes and process plant;
- Liaising with other process engineers, perhaps working on associated plants;
- Working closely with other specialists including scientists responsible for quality control of raw materials, intermediates and finished products, engineers responsible for plant maintenance, commercial colleagues on product specifications and production schedules, and the operating crew.

ESSO LTD. – Bogotá, Colombia - Process Engineering - Technical Manager:

- Providing design engineering support during project proposal, detailed design, commissioning & start-up of new FCC unit.
- Providing routine support of Refinery Fluid Catalytic Cracker and other major Refinery
Process Unit (answer technical inquiries and make recommendations: provide trouble-shooting assistance).
- Support commissioning of new plants and projects.
- Monitor and optimize process variables. Conduct unit process/energy optimization studies.
- Assists in developing and implementing advanced and multi variable FCCU controls.
- Develop and review FCCU and Hydrogen related process procedures and standards.
- Provide transfer engineering skills and technical knowledge to younger Engineers.
- Develop FCCU HYSIS simulations and on-stream equipment monitoring programs.
- Develop turnaround work scopes and associated engineering packages.
- Evaluate hydrocracker and hydrogen catalyst alternatives based on cost, performance, and product objectives.
- Perform FCCU debottlenecking studies and performance test-runs.

PONTIFICIA UNIVERSIDAD JAVERIANA – Interdisciplinary faculty – Bogotá Colombia
Duties: Professor of Chemical Industries and Chemical Engineering.

PROFICOL S.A. Petro-chemical Products – Bogotá Colombia - Health, Safety and
Environment Department Manager (H.S.E.).

MOVE LTD. Engineering, Design and Advisory – Bogotá Colombia - Process Engineer for
Oil & Gas Treatment Plants: Process Engineer involved in CPF (Central Production
Facilities) activities for the design and construction of oil and gas facilities.

EMPRESA COLOMBIANA DE PETROLEOS. "ECOPETROL"– Bogotá Colombia
Specific duties were as follows:
Operations and Process Engineer (Construction, Commissioning, Start Up) in Petrochemical
Plants:
- Paraffin (Wax) Plant: Hydrogen Generation Unit, Hydrogen Treatments plant, Disasphalting Unit with Propane, Disparaffinning Unit with Metil - etil - Ketone (MEK), LubricantsOils Treatment Plant with Phenol.
- Ethane Treatment Plant by "Turbo expander" Process
- Natural Gas Treatment & CO2 Absorption Units
- Ethylene Plant
- Polyethylene plant
- Aromatic, Polymerization, Alkylation.

Process Engineering Coordinator in the next areas:
- Heavy Crude Treatment Plants: Demex and Visbreaking
- Hydrogen Unit Generation
- Treatment Plant with Hydrogen, by Unibon Process
- Catalytic Cracking Unit, by UOP Process
- Amine Treatment plants
- Sulphur Production Plant
- Industrial Service plants: Water Treatment Plant, Electrical Generation plant, Steam
Generation Plant.
- Storage Tanks: Fuel Oil, Kerosene, Gasoline, Light Cycle Oil
- Hot Storage Tanks: Heavy Crude.

Loss Prevention Technical Coordinator: Safety, Fire Protection, Industrial Hygiene and
Environment Conservation (HSE):

Accountabilities:
- Safety engineering: including fire and gas detection systems, alarm systems, fire protection systems, escape and evacuation, fire walls, etc.
- Development of safety philosophies
- Hazard identification (HAZID)
- Review and input into the process design
- Hazard and operability studies (HAZOP)
- Risk assessment (Quantified Risk Assessment) (QRA)
- Risk management - assessment of appropriate controls
- Development of Safety Management Systems (SMS)
- Development of Safety Procedures (Safe Operating Procedures)
- Development and maintenance of the facility's Safety Case
- Development and provision of training, including emergency response training
- Fire Risk Analysis
- Flammable Liquid Spill Fires
- Water Mist Systems
- Fire Sprinkler Systems
- Fire-related permits: Cutting and Welding, Fire Protection Equipment, Flammable Liquids, Solids, and Gases; Liquid Propane Gas; Oil Burning Equipment, Tanks and Containers, etc
- Loss Prevention, Safety and hazards analysis: Accident simulation and investigation,
Vapor cloud explosions, Detonation, Flare Dispersion and Radiation and flame arrestor performance, Risk assessment.
- Environmental Risk Monitoring and Assessment Emission monitoring: Trace contaminant analysis, Health risk assessment, Site assessment and audits, Industrial hygiene surveys, Waste disposal technologies, Site remediation modeling and technology, Pollution control process evaluations, Pollution prevention analysis.

SOFTWARE:
Familiar with and owner of Engineering Software Programs such as:
- HYSYS, HYSYS.Plant, HYSYS.Process, HYSYS.Refinery, HYSYS.Pipe.
- Instrument Engineering Programs: INSTRUCAL PLUS
- Groth Calc – Q – Size: Sizing Calculations per API – 2000
- Line Sizing and Hydraulics Programs
- Fluid Flow Analysis for Piping System Design – Professional Designers & Engineers Inc.
- Kaldair, Flare Design Considerations
- Flowserve PumpSel.
- AutoCAD LT - 2004
- Master Converter Program by Savard Software
- GPSA Electronic Data Book
- Exxon Engineering Practices
- NEC, National Electric Code
- NFPA, Fire Prevention Code
- Saudi Aramco Engineering Standars
- NOC, General Engineering Specifications
- Windows XP, Microsoft Office XP, Microsoft Project, Microsoft Visio, Microsoft PowerPoint.

EDUCATION:
1976 - B.Sc. Chemical Engineering University of America
1971 – Sergio Arboleda College - Bogotá Colombia

PROFESSIONAL TRAINING:
- Fire Detection & Protection in Oil Facilities – Ibero-American Organization of fire Protection OPCI and Empresa Colombiana de Petróleos "Ecopetrol".
- Environmental Pollution: Causes, Effects and Solutions – Ecopetrol.
- Risks management – Colombian Safety Council.
- Participation in Safety Congresses, Hygiene and Medicine of the Work. National
Congresses of Occupational Health – Ecopetrol and Colombian Safety Council.
- Conservation and Saving of Energy – Ecopetrol.
- Mass Balance and Heat Transfer – Ecopetrol.
- Lubricants treatment with phenol – Ecopetrol.
- The Computer as Tool of the Modern Auditor – Systems Colombian Auditors Association.
- Electrical Facilities in Explosive Areas – Ecopetrol.
- Investigation Methodology – Universidad Industrial de Santander "UIS".
- Operational Investigation – UIS.
- Operation and Maintenance of Pumps, Turbines and Compressors – Ecopetrol.
- Operation of Boiler Programmers – Ecopetrol.
- Mechanical Seals – Mechanical Seal School, EG & Sealol.
- Cracking by UOP process – Ecopetrol
- Transportation and Storage of Low Temperature Products (Criogenics) – Ecopetrol.
- ASME B31.3 Piping Code – ASME Sponsored Course
- Gas Turbines & Centrifugal Compressors – Solar Turbine Company
- Natural Gas Processing Course – University of America

PROFESSIONAL AFFILIATIONS:
Association of Chemical and Petroleum Engineers of Colombia

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 15508)

Go to Search Parameters...

Brief Description

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

HVAC PROJECT MANAGER

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

ISO Compliance, 6 Sigma, Asset Mgmt, Vendor Mgmt, Catering, Transport, HK, Costing & Budgeting, HR, Employee welfare, FBT, Guest house mgmt, PF, ESIC, Medical, Fire drill, Security, Solving Employee feedbacks, Auditing, Billing.

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

13 years in quantity surveying

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.

I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada

Structural Designer

To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.

diploma in mech.eng, NVQ-level -3

Experience Drilling Supervisor, Land & Offshore

Dependable, motivated and organized hard worker who learns new procedures quickly, and meet schedules

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra

Career Maintenance Manager Mining

Rig Manager / Mechanical Engineer

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

Senior construction manager

Electrical estimator in industrial and commercial construction. Proficient in WinEst and Excel.

Diamond Drill Operator, surface drilling with the use of various types of machinery

Oil & Gas Landman

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.

20 years signalling experience with IRSE licenses and Signal Maintainer certificate. SPONSORSHIP PREFERED.

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out