Resume - Monitoring and Scheduling the Projects

Misco Jobs

Resume #18098

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking a position to utilize my professional knowledge and experience, through the highest level of commitment, towards an organization's growth and profit

PROFESSIONAL QUALIFICATION
1998 January - B.Sc. (Chemical Engineering)
Institute of Chemical Engineering & Technology,
University of the Punjab,
Lahore, Pakistan.

PROFESSIONAL MEMBERSHIP
Pakistan Engineering Council – PEC, CHEM / 4331

TRAINING COURSES
Course of PLANNING & SCHEDULING organized by DESCON Engineering Ltd.
Primavera Training- Project planning & Scheduling (601/602/603) 1998

Training Program about the awareness of ISO 9000 by DESCON Engineering Ltd.
Project Management courses / Software 1998
DESCON Engineering Ltd. (In-house training)
Workshop on Activity Based Costing 1998
Training of loss prevention coordinator 2000
- H2S Awareness and Escape 2001
- Negotiation Skills
- Development Skills
Workshop on Effective Team Building & Leadership 2001
Computer Networking Essentials for Young Managers 2002

COMPUTER SKILLS
Comprehensive working experience on the following software:
Primavera Project Planner ver 3.1b
MS - Project 2002
MS - Office 2000
MS – Word
MS – Excel
MS - Access
MS – Power Point

PROFESSIONAL EXPERIENCE
October 2003 – Till – Present
PRESSON DESCON INTERNATIONAL (Pvt.) Ltd.,
Lahore- PAKISTAN

Principal Engineer Planning
Currently working as a Principle Engineer Planning for PRESSON DESCON INTERNATIONAL (Pvt.) Ltd
Monitoring and Scheduling the REHMAT DEVEPLOMENT Project Phase – I & II
Developing progress reports for Petronas Garigali Pakistan Ltd. (PCPL) on weekly and monthly basis.
Monitoring for the JABO PRODUCTION SEPARATOR Project.
Working on different Proposals and making Plans for the bids.

January 2003 – To – October 2003
CONTROL APPLICATIONS & EMIRATES (CAE)
Abu Dhabi – U.A.E.

Senior Planning & Cost Engineer
Worked as Sr. Planning Engineer, Cost & Schedule and Monitoring work
Worked for Zirku Supervisory Control System Project and developing cost basis monthly and weekly reports to monitor an EPC (Engineering, Procurement and Construction) project for Honeywell & Zakum Development Company.
Worked for Invensys Project for different off shore platform, NPS, WIP, WSP, SSP, GTP, PGP and generate monthly reports and schedules.
Developed the EPC schedules and preparing cost & monitoring setup for different proposals.

June 2002 – TO – February 2003
PRESSON DESCON INTERNATIONAL (Pvt.) Ltd.,
Lahore- PAKISTAN

I/c Planning & Cost Control
Worked to develop the Project Management Systems for Budgeting, Planning and Scheduling for the projects of PRESSON DESCON INTERNATIONAL (Pvt.) Ltd., Head Office
Monitored the Bhit Gas Development Project - Building Works, Sawan.
Worked as I/c Planning, cost & Schedule for the Mazarani Gas Field Project, an EPC Project for Pakistan Petroleum Ltd.

July 2001 – TO – May 2002
DESCON Engineering Ltd.
Lahore, PAKISTAN.

Proposals Planning Engineer
Worked to analysis the Proposals Planning and cost effect of the projects with DESCON Engineering Ltd., at Head Office.

April 2000 – TO – June 2001
BOROUGE Petrochemicals Projects, DESCON Engineering Ltd.
Ruwais, Abudhabi, U. A. E.
For BOROUGE (UAE) / BECHTEL at Borouge Petrochemicals Project
For (TECNIMONT Spa.) Mechanical and Electrical discipline for Tecnimont Project

I/c Planning and Scheduling
Worked as I/c planning for cost & schedule to prepare budgets, schedules, and monitor the cost & progress for the project
Developed Level II, Level III and Level IV plan for measuring the progress through P3.
Responsible for planning progress on daily/weekly/monthly basis, cost & progress monitored in the construction of the project*
Prepared and Monitored the four-week look-ahead plan for cost and progress analyzing the material, drawings and available works front
Provided Field Engineering support, Document and Data Management during the execution phase*
Approved the Method Statements, Procedures, Inspection and Testing Plans (ITP, S) and Hydro Test pack by the client for execution.

April 1999 – TO – April 2000
ASAB Gas Development Project, DESCON Engineering Ltd.,
ASAB, Abudhabi, U. A. E.
For Abu Dhabi National Oil Company ADNOC (UAE) / SNAMPROGETTI Spa/ HYUNDAI

Planning & Cost Engineer
Responsibility included preparing control budget for the project, and establishing cost monitoring system as well as Progress measurement and monitoring system. Responsible of Planning & schedule on daily/weekly/monthly basis and reporting status on versus plans for schedule and cost.
Prepared and Monitored the four-week look-ahead plan for cost and progress analyzing the material, drawings and available works front
Developed the cash flow forecast and updating cost reports to the management*
Handled Field Engineering Issues and maintaining the record according to the company and client requirement and to fulfill the requirement of ISO 9001.
Approved the Method Statements, Procedures, Inspection and Testing Plans (ITP, S) and Hydro Test pack by the client for execution.
Prepared Master Hydro testing Plan for all the lines of the gas plant.
Coordinate with client for preparation of pre commissioning packages for Turbines, pumps, vessels and heat exchangers.
Supervised pre-commissioning activities like flushing, reinstatement and final check for box up.

September 1998 – TO – April 1999
Attock Oil Refinery Up-Gradation Project, DESCON Engineering Ltd.,
Attock Oil Refinery Rawalpindi, PAKISTAN

Planning & Cost Engineer
Worked as a Cost & Planning Engineer at Attock Oil Refinery Up-Gradation Project, Rawalpindi with SANZO MATSUI ENGG. Corporation - JAPAN. Took Care of Cost & Schedule Planning and Monitoring for Mechanical (Equipment & Piping), as well as Electrical Scope of work, progress of that project.
Prepared weekly and monthly schedules and cost reports preparation and submission to Client and in house management*
Monitored of the cost & Progress on weekly basis.
Invoiced to Client on monthly basis for the project.

I/c Hydro Testing & Chemical Cleaning Process
Worked as an I/c Hydro Testing and monitor the Chemical Cleaning Process of CS pipelines of the Project. I/c Pre – Commissioning*
Worked for the Project Pre-Commissioning activities as an in-charge.

March 1998 – TO – August 1998
DESCON Engineering Ltd., Head Office,
Lahore, PAKISTAN.
Worked as Assistant Engineer in Project Monitoring & Construction Department (PMAC) and did Estimation of Resources, budgeting and monitoring of cost & schedule of the Projects.
Contributed in the development of Bidding System in Information Technology Services Departments (ITS).

May 1997 – TO – October 1997
FFC – Jordan Fertilizer Complex Project, DESCON Engineering Ltd.,
Bin Qasim, Karachi, PAKISTAN
Worked on internship and took contribution to define Project budget and expense head in the system.
Worked on project budgeted vs. actual cost on cost center and expense head wise and generated reports for the project.
Worked on analyzing and controlling of the Cost of the Project.

August 1995 – TO – September 1995
Pak – China Fertilizer Ltd.,
Haripur Hazara, PAKISTAN.
Worked as Training Engineer at
Ammonia Plant
Carbon Dioxide Plant
Urea Plant
Water Treatment Plant
Utilities
Responsibilities covered equipment such as Fired and Waste Heat Steam Raising Boilers, Associated Water Treatment Plant and Gas Turbine, Air Compressors and Cooling Water Systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9751 to 9800 of 15508)

Go to Search Parameters...

Brief Description

Experienced business professional specializing in the development, engagement and closure of long term service business opportunities. Key strengths include strong strategic thinker, planner, managing complex infrastructure bids, managing multi-disciplinary, cross-cultural virtual teams

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.

5 Years of SAP Experience in Enterprise Planning, Corporate Strategy Management, Supply Chain Metrics, Data Warehousing (SAP NW – BW, BI), Strategic Enterprise Management (SEM) and Integrated Planning (IP) on NW 7.0 (2004S) & Enterprise Planning on NW07 platform , spanning industries like Oil & Gas

Diploma in chemical technology with 10 over years of experience in petrochemical industry , DCS OPERATION(YOKOGAWA CS-3000), FIELD OPERATION,Now as SENIOR PROCESS TECHNICIAN in singapore

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Highly motivated and experienced Production Supervisor. Ability to supervise large and small operation teams. Computer literate. Multi tasking ability. Safety awareness within the oil and gas industry. Managment of major emergency

More than 13 years experience in design and operations. Knowledgable in Process Simulation softwares such as HYSIS, PIPESIM, PIPEPHASE and PIPENET and line and equipment sizing calculations. Preparation of P&IDs, datasheets and Cause & Effect charts. HAZOP, HAZID participation.

Welding Inspection, QA/QC Documentation, Pipeline construction, Fabrication and Installation

Monitoring and Scheduling the Projects

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

Licensed Mining Engineer

B.Tech in Mech Engg

I will be graduating this April 2009... hoping to get a job.

Time served apprentice trained mechanical fitter, with experience of large fixed plant in quarries, factories, foundries and cement plants

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

PLANNING , MOETHODS MAINTENANCE ENGINEER

Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.

Health & Safety Inspections (OSHA, MSDS)

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

Human Resource management, Auditing and Account management. B. Sc in Accountancy, Associateship- ICAN, Graduate member, Nigeria institute of Management and Student member, Chartered Institute of taxation of Nigeria.

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

I am Bachelor of Commerce with superior working familiarity.

Well testing Senior Operator.

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

Motivated, quick learner who is willing to put forth my greatest effort in completing any task.

3 year s experience underground , i have 2 years experience with a maclean bloter and 1 year with jackleg and stoper

DRILLING MATERIAL COORDINATOR

Fresh Graduate Quantity Surveyor

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 [ 196 ] 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out