Resume - 30 yrs oilfield experience, both onshore & offshore working in the Middle East (...

Misco Jobs

Resume #1833

CONTACT INFORMATION:
View contact information...

RESUME

POSITION APPLIED FOR: Toolpusher or Night Drilling Supervisor

PRESENT POSITION: Rig Site Company Man

PROFILE:

I am a drilling and completions supervisor with over twenty nine years experience (19 years as a Toolpusher) in the oil industry. I have extensive drilling experience with most drilling fluids including oil base, water & polymer base mud systems, foam and air. My experience extends to fully automative rigs, and Varco¡¦s TDS 3, TDS 4, TDS 9 & IDS. I have drilled and completed wells to a depth up to 23,000 ft. in Australia (All areas), Indonesia, China, Iran, Libya, Saudi Arabia and the North Sea, both on land and offshore. I have experience in directional and horizontal drilling using steering tools, MWD and LWD tools, AGN, and rotary steerable tools. I have experience in short and long radius horizontals; ¡§S¡¨ curved wells and extended reach wells (+70deg). I have a wide range of experience in completions on all types of wells ¡Ve.g. bear foot, dual, tandem, gas injection and single completion. Involved in projects and commissioning team in the construction of three drilling rigs, here in Australia (Atwood Oceanics Modular rig # 19, Woodside Petroleum¡¦s Goodwyn ¡A¡¨ modular rig) and Houston TX, (Helmrich & Payne / Atwood Oceanics rig # 200), including the load out of these rigs to their respective locations.
I possess excellent communication skills with all levels of people of different nationalities, computer literate and written skills, safety ¡ execution of procedures- and profit orientated. Self-starter, hard worker and team player.
Duties: -
Provide training and evaluation of employees under my supervision, serve as primary liaison between contractor and operator, and provide supervision of all operations on operators Jack-Up. Make recommendations on alternative methods or equipment when unusual situations are encountered and co-ordinate timely deliveries of material and equipment to the wellsite as required. Ensure that we, the operator meet all requirements of the contract and verify all operations by way of tour reports & field tickets. Ensure that the rig and equipment (plus third party equipment) are adequately maintained to maximise efficiency and minimise downtime. Ensure all operator & contractor safety rules and regulations are followed as well as modern drilling practices. I possess excellent communication skills with all levels & nationalities, computer literate (excell, word & outlook) and written skills, safety & profit orientated, a self starter, hard worker and team player.

CAREER HISTORY:

July 2002- Present ¡V SELECTIVE MARINE SERVICES LTD. (NETHERLANDS)
Work on Consultancy basis out of Dubai in relation to all aspect of the oil & gas industry as Company Man, Rig Manager, Drilling Supervisor and Rig Superintendant.
„h Operator working for Halliburton as their rig site company man in the Arabian Gulf

April 2002 ¡V June- ILI Corp.(Libya)
Rig Manager for ¡§ILI¡¨ overseeing the running & operation of the rig and to ensure that the work is carried out in accordance with the operator. Report to the Rig Superintendant and write programs for the operation.

October 2001- March 2002- SAUDI ARABIAN SAIPEM DRILLING
„h Operator ARAMCO
Rig Site Manager for Saipem overseeing the running of the rig, construction and commissioning of same. Ensure all work is carried out in accordance with the drilling program and contract as stipulated by ARAMCO.

July 2000- September 2001- GREAT WALL DRILLING COMPANY (QATAR)
Operator Qatar Petroeum ¡QGPC & RAS GAS
Rig Manager on Chinese Rig overseeing daily operation reporting to rig superintendant and management. Liase with operators representitive and deligate work to crews. Work involed drilling short radius horizontal wells (+12,000 ft) and redrills.

October 1999 ¡ July 2000 ¡ CHERRINGTON GROUP HDD
Project Superintendent for Cherrington Australia.
Duties were to oversee and direct all aspects of construction on project, responsible for executing the work according to the contract specifications, resolve all site issues, and coordinate with the Project Manager to ensure that changes during construction are accurately reflected in change orders, and ensure all equipment was on site to minimize down time.
Description of Work: The work involved drilling of horizontal bores (26¡¦ hole size) for installing the pipelines & conduits under rivers, roads, environmentally sensitive areas or other obstacles where conventional pipeline installation methods won¡¦t work. Job was for the South Eastern Gas Line Project for DUKE ENERGY from Sydney to Esso¡¦s gas plant at Longford, Victoria

1988 ¡V June1999 - ATWOOD OCEANICS
September 1996 ¡ June 1999 - Atwood Oceanics Platforms Pty Ltd (Sale, Victoria)
Operator-Esso Australia (Bass Strait) West Tuna Platform November 1996 ¡V July 1999.
Senior Toolpusher [Australia], Rig #200. Duties included planning and supervision of rig, daily liaison with operator¡¦s representative, Drilling 38 directional wells-Horizontal, ¡¦S¡¦ curve, deviated, and completions- in 2 years. High angle wells of 76 degrees. Experienced in drilling operations with integrated drilling system and star racker system (SRS 2).

July 1996 ¡September 1996 - Atwood Oceanics Inc, Houston -
Commissioning & Load out Supervisor [Houston, TX], Completion and commissioning of rig up of H&P rig 200

August 1993 ¡July 1996 - Atwood Oceanics Services, (Perth, Western Australia) - Operator-Woodside Petroleum (North West Shelf) Goodwyn¡¦A¡¦ 1994 to 1996 as
Senior Toolpusher [North West Shelf, Australia], Rig Goodwyn ¡A¡¨. Supervise drilling and delegation of work on rig, liaise with operators drilling supervisor and Platform Supervisor (PIC). Accurately documenting daily operation, writing procedures, making daily decisions to increase efficiency of time and ensuring safety is kept at a premium. Supervise all operations related to drilling and completions but not limited to Coring, Fishing for lost tools, pipe and junk, Running Casing and Liners, Directional and Horizontal Drilling, and Controlling kicks while drilling.

February 1992 ¡ August 1993 - Atwood Oceanics Australia, (Perth, Western Australia) -
Construction Supervisor, Kiwana-Perth [Australia]. Supervise with the construction of Woodside petroleum¡¦s Goodwyn ¡A¡¦ drilling rig, and the commissioning of the rig after completion, also the load out and the eventual rig up/final commissioning on the Goodwyn Platform.

March 1988 ¡ February 1992 - Atwood Oceanics Platform Pty Ltd - Formally Shelf Drilling (Sale, Victoria) ¡Operator-ESSO Australia (Bass Strait) Bream¡¦A¡¦ Platform
Senior Toolpusher [Australia], Rig # 19. Liase with oil company supervisor advising of current operations and possible situations. Delegate work to employees and maintain safe and environmentally friendly work environment. Relief Drilling Superintendent.

1984 ¡V1988 - SHELF DRILLING PTY LTD: -
December 1987 ¡ March 1988 - Shelf Drilling Pty Ltd (Sale, Victoria) / Ricther Drilling International (Brisbane, Queensland)
Operator-CSR & Chinese National Oil Co. Hianan Island, China.
Operations Manager (Relief) [China], Supervision of drilling on day work basis contract, selection of third party services to perform for company, liaise with operator, accurately documenting daily operations and cost, daily communication with head office in Australia.

August 1987 ¡ December 1987Shelf Drilling Pty Ltd (Sale, Victoria) [Australia]¡
Senior Toolpusher [Australia], Rig #19, Oversee the construction and commissioning of rig and load out of same.

May 1984 ¡ August 1987 - Shelf Drilling Pty Ltd ¡
Operator-ESSO Australia (Bass Strait)
Toolpusher [Australia], objectives are to ensure the health, safety, and welfare of employees under my supervision. To provide a quality service to the client while maintaining company policy and integrity without compromising considerations for our environment.

May 1984 ¡ August 1987 - S & T DRILLING: -
Position held Toolpusher [Australia] August 1983 ¡ May 1984

1980 ¡ 1983 - OIL DRILLING & EXPLORATIONLTD: -
Position Held: Toolpusher [Libya] 1981 ¡ 1983.
Position Held: Toolpusher [Australia] 1981
Position Held: Driller ]Australia] 1980 ¡ 1981

1976 ¡ 1980 - SANTA FE DRILLING: -
Position Held: Driller [Libya] 1978 ¡1980 Position Held: Assistant driller [Libya] 1976 ¡ 1978

1974 ¡1976 - OIL DRILLING & EXPLORATION (AUST): -
Postion Held: Assistant Driller [Iran] 1975 ¡ 1976
Position Held: Assistant Driller [Indonesia] 1974 ¡ 1975

1973 ¡ 1974 - SANTA FE DRILLING
Position Held: Assistant Driller [Indonesia]

1970 ¡ 1973 - OIL DRILLING & EXPLORATION (AUST): -
Positions Held: Roughneck to Derrickman [Australia]

EQUIPMENT FAMILIARITY

IDECO Super 7-11 Derrick, IDECO Jr.Super 7-11 Derrick, Lee C. Moore Derrick, Lee C. Moore Standard Derrick, Woolslayer Boot Strap Derrick, National 10-P-130 Mud Pumps, National 14-P200 Mud Pumps, Gardner Denver PZ 11 Mud Pumps, Ideco 1250, Varco TDS 3, TDS 4, TDS 9, IDS. Continental Emsco Drawwork 2000,National 1625 UE Drawworks, National 80 B Drawworks, National 110 Drawworks, National 110 UE Drawworks, National 1320 UDBE Drawworks, National C-375 Rotary Table, Cameron 13 5/8¡¨ Type U BOP¡¦s c/w GK annular Preventer, Vetco Diverter System, Dril-Quip Diverter System, Varco Pipe Deck Machine and Conveyor, Star Racker System, Varco AR 3200 Iron Roughneck, Varco Flush Mounted Spider, PS-16 Air Slips. Varco Block Control & Zone Management Systems, Varco M/D DAQ System, M/D Visualogger & VIP Data Logging M/D Spectrum1 1000 & Varco Mud Watch.

SPECIAL TRAINING AND SEMINARS

IWCF -Well Control (Surface Stack) Supervisor, conducted by WELLCAP ¡ expires January 2003.
First Aid Level III and CPR ¡expired November 1999
Fire Fighting (ESSO)
Hotwork / Confined Space entry (Woodside Pet.)
QA & QC trained (Woodside Pet.)
Emergency response (Woodside Pet.)
Job Safety Analyst (JSA) (Woodside Pet.)
Dogman / Crane Driver Certificate (Victorian Government)
Forklift Certificate ¡ 8A1-(Victorian Government)
HUAT & Sea Survival ¡ conducted by ESSO (1998) and I.F.A.P. (1995)
Man Management Seminar (Australian Institute of Management)
Basic Computer Course (Australian Institute of Management)
Industrial Relations Course with CSR Ltd. Australia.
Safety Training Course with both Santos and Woodside Petroleum.
Stuck Pipe Course with Aberdeen Drilling School.
Well Productivity Awareness School conducted by B.P. Petroleum
Supervisory Development Seminar with CSR Ltd
Interaction Management Course conducted by Shelf Drilling
Emergency Response Procedures [EPR 16] Conducted by Awood/Woodside Joint
Managing HSE Workshop conducted by Woodside Offshore Petroleum
Wilmead-Winch Operator conducted by Wilmead Australia

Education: Graduated Higher School Certificate St. Gregory¡¦s Agricultural College, Campbelltown, NSW Australia 1969.

Born: January 23, 1951 in Sydney Australia -
Marital Status: Married with 3 Children ¡
Nationality: Australian ¡
Passport:Valid Australian Passport (expires July 2009).
Interest: - Investing, golf, surfing, fishing, travelling, sport, computers.

References: -

References are available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6751 to 6800 of 15497)

Go to Search Parameters...

Brief Description

RESUME SUMMARY: Experienced mechanic looking for a Experienced company

Experienced Health & Safety Manager/Officer. Experienced Mechanical Engineering Technologist. Experienced Power Engineer.

This resume contains my experiences in truck driving and heavy equipment operating.

Drilling consultant Tunisia, offshore Ecuador, the Permian Basin, the US Gulf Coast. Expatriate in Saudi Arabia. Directional Driller for Sperry-Sun. Drilling Supervisor Texaco E & P. Computer literate. B.S. in Petroleum Engineering.

New Graduate with BS ChE and Geol. Industry experience!

The wellsite supervisor is responsible for directing and co-ordinating all employers at the wellsite to achieve the goals of the work planned by the operator and ensure compliance with all legislation pertaining to that work at the wellsite.

I have 28 years experience in the drilling & completion industry. I have worked as a operations manager, drilling superintendent, drilling consultant, directional & horizontal supervisor. I have 10 years offshore experience. I have hpht, 25000'+, h2s, deviated hole experience

I wish to apply for a position as an Instrumentation or/and Electrical or a Process Technician. I have 22 years experience in the Instrumentation and Electrical field. I complete my T4, I pass my Instr. trade test. I write my wireman’s license and also my Elect trade test.

AREAS OF SPECIALTY Project Supervision, Resource Estimation and Delineation,Grade Control, Geostatistical and 3-Dimentional Computer Modeling, Hydrogeological investigations, Environmental Site Assessment, Remediation, Well Installations.

Senior bilingual mining geologist/analyst available on contract basis, international project management, Exploration & Mining, training, business development.

RESUME Directed seeking Driving position, Cover Page attached, to Resume

OBJECTIVE To offer total drilling management experience in radial, multi-lateral, horizontal, underbalanced, directional and conventional drilling techniques.

I am having total 15 years experience in design field, 5 years in manufacturing detail designing in valve industry-fouress, 5 years in hvac & pollution control field- abb/flakt, 5 years in design consultancy firm - chemtex- pds 4+ years exposure.a

Engineer with 25 years experience working with pumps, compressors and gas turbines in offshore, petrochemical, refinery, power generation and water injection projects

30 yrs oilfield experience, both onshore & offshore working in the Middle East (at present) Libya, Indonesia, Iran, Saudi Arabia and Australia. Have TDS experience and have worked on fully Automatic Rigs. For more information please see full resume.

electrical design/project engineer with 14 years of work

Mechanical engineer and safety engineer diplomas , I’m looking for a safety position in an oil and gas company worldwide ....available , and able to relocate , preference Africa and Middle east ( UAE, Saudi Arab , Brunie, Qatar, Kuwait , Algeria ...) ,

A professional with over 31 years of work experience in exploring for precious and base metals in Precambrian terrains in South America. A field geologist with good records of mining discoveries and achievements.

Twenty years of varied experience in Sales and Marketing. Excellent communication skills in Spanish and English and acknowledged for having exceptional sales and management skills.

To obtain a career in the chemical or environmental fields. I have the acquired the experience, education and skills required for a variety of positions.

During 20 plus years of progressively responsible experience in the oil and gas industries, I have worked in many positions, such as transportation, drilling, exploration, production, purchasing, budgeting, and management. In my last position as an Operations Manager.

- Well planning (drilling & completions): casing design, programming, operations supervision – onshore and offshore. - Project management - Expert adviser on wellbore stability and stuck pipe issues. - Quick log interpretation and other wellsite petroleum engineering responsibilities

Materials/ Logistics Supervisor with 30+ years experience. Extensive knowledge of Drilling , Completions , Workover , Civil Engineering. Good all round computer skills. Good team player with hands on approach to supervision. Ability to work &live in remote locations .

DCS Start-Up and Commissioning Field Engineer I&C Field Engineer I&C Technician

Over 20 years experience in drilling, completion and workover.

I have been working in qatar petroleum as senior operator in onshore based

Looking for world wide employment as a Drilling Fluids Engineer, Salesman or a stock point management position for expediting chemicals and materials to drilling locations.

14 years Oil & Gas Industry experience in electrical maintenance, Low Voltage and High Voltage, normal and hazardous areas, on-shore and off-shore, grounding systems, UPS´s , PLC´s, engines ignition systems, heat tracing, HVAC. General acknowledge in Process and Instrumentation.

Diploma Chemical Engineering. Trained and experienced in Well Operation, Otis Panel, Production & Gathering Station, refinery, petrochemical process operations, Communication skills, Computer education, organizational skills. Giving training to Omani line staff.

8 months running mud motor, 3 years pushing tools, 18 years drilling, 2 years derrickman, 1 year floorhand-certified diesel mechanic

Production Adviser/Relief Superindent: over 20 years exp in the Oil& Gas Industry

Twenty-eight (28) of experience world wide in the drilling of exploration and production wells, also in work-over and completion operations. Looking for either a well site supervisor position or superintendent of operations.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

Results oriented person whose proficient in Metallurgical,Safety, Other Technical and Management Systems, Experienced in Quality, Health, Safety and Environmental (QHSE) & Management Systems also Good written, verbal, Communication and presentation skills.

Mining and Petrolium

I have experience in mining as Technical Cataloguer and Material’s Activator in Grinding Line Project I worked in Production, Planning, Engineering, Projects, Quality & SPC I am a Engineer with solid technical training, resolution of problems, proactive and versatile. I am Spanish citizen

More than 26 years of experience in the Oil & Gas industry, with particular specialisation in Contracts and Procurement disciplines. Braod International experience, good technical and managerial skills, good knowledge of foreign languages.

25+ years of Chemical Plant experience. Veteran. Innovative thinker and problem solver. Excellent communications skills and I work well with others. Limited gas/oil experience, but, a fast learner and looking for a chance to learn new things.

Experience of controls system for example: DCS, ESD, F&G, HIPS. OFFSHORE, ONSHORE, FPSO, DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE, HAZOP, SIL, FEED.

organized, efficient, self-motivated, hard working, cooperative, respectful of others

I am looking for work in the mining industry as an Equipment Manager.

I have 30+ years experience in the Electrical/Instrumentation field, primarily involved in start-up of various types of facilities including LNG, oil refineries, chemical plants, automobile assembly plants, paper/steel mills, pharmaceutical clean rooms, and environmental clean-up sites.

Summary of skills Industrial Electrician Certificate(Canadian Interprovincial Standard ) Electrical Engineering Diploma Fluent in English, Russian, Ukrainian

During past years I have held positions ranging from Aircraft Pneudraulic Technician to Field Service Engineer and Manager to Product Support Coordinator. I am seeking a new association with a firm where I can contribute to its cost effective profitability.

Seek position as a maintenance superintendent in the mining field.

A very experienced professional in the oil industry (20 years in Cabinda, West Africa),with over 20 years of experience in various aspects of Purchasing, Traffic, Logistics, Warehousing and Information Technology.

I AM INTERESTED IN A POSITION INVOLVING MATERIALS/INVENTORY OR WAREHOUSING. I AM WILLING TO TRAVEL OR ACCEPT A POSITION OUT OF THE USA.

Certified Safety Professional with 10 years of manufacturing, management, and underground mining experience.

Experienced onshore/offshore subsea installation and construction manager

Commissioning Manager/Operations/Construction

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 [ 136 ] 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out