Resume - I have extensively worked with world renowned engineering firm

Misco Jobs

Resume #18390

CONTACT INFORMATION:
View contact information...

I have extensively worked with world renowned engineering firm like Vetco Aibel Norway, Weatherford process systems, Mott McDonald, Kvaerner and have received best performance award for the year 1998. I am well versed with all Engineering recommended practices, standards & codes including NORSOK. I am presently serving in the position of System Lead Engineer - Process for Vetco Aibel Norway in oslo for marathon fpso project. I am on a work permit as a SPCIALIST process engineer for Vetco Aibel Norway.

Being best performer at my previous employment and university rank holder, performance is assured/guaranteed.

QUALIFICATION B. E in chemical Engineering – University Rank
Present Position-System Lead Engineer Working with Vetco Aibel in Norway (Oslo)

WORK EXPERIENCE ~ 10 Years
Job Profile
- Process flow diagram with material & energy balance
- P & I diagram
- Design of heat exchangers, vessels, pumps, columns, etc.
- Equipment process datasheets
- Instrument process datasheets
- Equipment list
- Specification of Safety Relief Valves
- Conceptual equipment layout
- Utility summary
- Electric drive list, emergency power required
- Trip schedule (cause & effect matrix)
- SAFE Chart & SAT tables
- Control philosophy
- Hazardous area classification
- Thermal ratings of exchangers
- Line list (putting operating data on list prepared by Piping)
- Specification for flare system, water treatment plant,
Effluent & chemicals dosing system for cooling tower
- Checking of utility distribution diagram prepared by Piping
- Checking of flare network for back pressure on safety valves
- Hydraulic check for critical lines
- Functional input to DCS vendor (including graphics).

PREVIOUS PROFESSIONAL EXPERIENCE:
SM0E –Singapore
Nov 2002 to September 2004

Weatherford Process System & Solutions-Singapore
Jan 2002 to Nov 2002

Kvaerner India ltd.
June 2000 to Jan 2002 Position held: Lead Process Engineer

Detail Engineering for:

- Bongkot Field Development Project – Gulf of Thailand
375 MMSCFD sour process platform for Total
- HalfDan Field Development Project – North Sea for Maersk Oil
- Dan FG field development for Mearsk Oil in North Sea

Basic & Detail Engineerign for:

Position held: Lead Process Engineer

- FPSO for Prosafe Norway for their aBO field development Project
- Woolybutt field development for Vanguard – Australia.
- FPSO for Ranger Oil – Etame Field Development
- Gas Injection & Buffer Gas compression system for CPP3 for vietsopetro-vietnam.
- Detail Engineering for offshore facilities for Cairn Energy
- Study for relief and blowdown for Enron Oil & Gas Ltd. Offshore facilities at Panna Offshore of Mumbai.
- Detail Engineering for 5000 TPA Ethyl Acetate Plant for SASOL South Africa. Scope of work involved safety relief valve network calculation and development of Hazardous area classification drawings.
- Basic & Detail engineering for BASF butandiol & Maleic Anhydride at Kuatan (Malaysia) with technology from Kvaerner Process.
- Basic & Detail Engineering for preharvest fungicide plant for Hikal Ltd with a capacity of 1000 TPA based on basic engineering information given SINGENTTA (Switzerland)
- Basic & Detail Engineering for 150 kg/hr polypropylene & poly ethylene plant for Sanghai Petrochemical Corporation (China) & Aristech Corporation (Texas-USA) Research Centre.
- Detail Engineering for sulfur recovery unit based on technology from Jacobs-stork.
- Engineering studies for flare 7 TPD Flare gas recovery unit for Midland refineries (Darussalam).
- Precommissioning & Commissioning Activities for 10 TPD dithiocarbamate plant & 50 TPD lube blending facilities for Indian Oil Corporation – Mumbai.
- Involved in extensive preparation of operating manuals for Halfdan Field development for Maersk Oil.

March 1995 to June 2000
Mott McDonald ltd
- Position held: Senior Design Engineer (Process)
- Job responsibilities included Process development along with customer's R & D team by conducting Pilot Plant trials. Basic & Detail engineering, debottlenecking, Preparation of Operating/maintenance manual, Precommissioning, Commissioning activities for major multinational viz:
- ICI limited for Polyurethane's
- Novartise Enterprise
- Ranbaxy & Rhone poulenc
- Engelhard Highland ltd.
- Lubrizol India limited

Membership & General Membership of professional organization:
- Associate member of Indian Institute of Chemical Engineers
- Trained Quality Assurance Auditor by LRQA for ISO 9001 system (certificate attached)
- Received Best engineering performance award for 1998 from previous employer (certificate attached)

Process Software Exposure
BJAC, HTFS, HTRI – Heat Exchanger design & rating
HYSYS, PIPESYS, PRO-II, OLGA, PIPESIM, WINSIM – Process simulation
FLOWMASTER, INPLANT, PIPENET – Hydraulic Piping network analysis.
FLARENET – Flare network analysis
FLARESIM: Flare radiation analysis

Testimonials & References are Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8051 to 8100 of 15341)

Go to Search Parameters...

Brief Description

Seeking assignments in sales and marketing/Business Development/Client Relationship Management with a growth oriented reputed Organization. I want to excel and grow in an organization and imbibe all the better qualities to become a member of the core team of the organization.

For my 2 years relevant experienced in contracting and other related industries lately job projects in Oil and Gas , I encountered major job aspects in the field of Safety Laws and Regulations implementation internationally wherein I joined the company with the project of Sulf

Senior manager with more than 10 years of experience the Marine response field. ICS trained and proven, at EPA Super Fund sites, as well as emergency response. A strong background in the development and delivery of training, tailors training style to whomever the audience (Responders, Managers, or

BSc (chemistry-physics-math)

Quality Assurance/ Quality Control Inspector

1.B.E. in mining engineer

Ironworker, sheetmetal mechanic

Skills in CadWorx P&ID Pro, CadWorx Plant 2008, Microstation V8. 3 years field experiance. 8 years AutoCad Experiance.

I'm a metallurgical engineer seeking for a challenging position in the mining industry to further enhance skills and analytical abilities while at the same time giving value to the company of which I am working with

I was a Commissioning Engineer at the Rio Tinto Cape Lambert 80 MTPA Port Upgrade in 2008. In 2007 I was the Electrical Engineer responsible for the decommissioning of the original inloading and outloading circuit at the Dampier Port Upgrade Phase B. I excel in a team environment and have a very goo

S1 Teknik Perminyakan UPN "VETERAN" Yogyakarta, IPK 2.76. Pernah bekerja di bidang IT selama 2 tahun. Saya tipe orang yang sopan dan sabar, cepat belajar, good listening, analitis. Karakter tersebut sangat membantu dalam pekerjaan dan tanggungjawab yang saya emban.

Skills in 2D/3D modelling of Piping / Mechanical works using Autoplant Bentley 2004 & Autocad 2006

Last seven years working in the field of QA\QC & Non-destructive testing.

Mechanical engineer, fast learner, good communication skills, social and leadership qualities

HSE Management

Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Field Engineer with knowledge in petroleum and geology

Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.

Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.

Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience

Good with Microsoft for Windows. I regard with my self as a communicator both English and Indonesia with high level motivation and self reliance and able to apply both analytical and creative solution to problem solving. Have a good educational background in operation, marketing in Banking & Export

I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)

35 years experience in open pit mining, started as operater worked my way up through the ranks to head of department mining, present employment.

BGAS/CSWIP Painting Inspector Grade 2

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Diesel fitter, supervisor, work shop planner

Automation, control engineering in industrial plants

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

Area Maintenance Static Supervisor

SCM Logistics and Materials Managment

Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Dual Post Graduate with Mechanical + Management with 8 years of Industry Experience is looking for fresh chanllenges.

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

Asphalt Plant Manager/Foreman 38 years in asphalt production field

Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...

11 years experience in various projects includes design, costing, construction and control. Project support experienced working in fast-paced environmental demand strong organization, technical and interpersonal skills

First Prev 151 152 153 154 155 156 157 158 159 160 161 [ 162 ] 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out