Resume - Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw]...

Misco Jobs

Resume #18681

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATION:
B Sc Chemistry Passed In Year April 1996 From South Gujarat University With 58%.

EMPLOYMENT HISTORY:
1] PRESENTLY I am with Reliance Industries Ltd. [Petroleum Division] World Largest Grass root refinery – 550 KBPSD unit capacity being revamped to 650 KBPSD crude processing capacity at Jamnagar, India. WORKING AS PLANT OPERATOR SINCE 28.12.98
2] Guajrat Refinery (a division of Indian oil corporation ltd) with capacity of 13.7 mmtpa of crude processing capacity worked as apprentice operator form 28.04.97 to 27.10.98

PROJECT (COMMISSIONING) EXPERIENCE:
I was involved in successful precommissioning/commissioning & Startup of Light Naphtha Unionfiner (Cap.: 29000 BPSD) & Merox units which include Sat LPG Merox (Cap.: 19000 BPSD), Unsat LPG Merox (Cap.:60000 BPSD), Light Kerosene Merox (Cap.: 35000 BPSD) & Gasoline Merox (30000 BPSD). During this period I was mainly involved in

1] Review of PFD, P& ID, and equipment datasheet.
2] Going through plant specific operating manual and standard operating procedure manual
3] loop punch list preparation & dilution of punch list.
4[ Precommissioning & commissioning activities like hydrotesting, flushing, leak test, drying, final box up purging, acid pickling etc.
5] Checking Fire and Gas Detection System and also fire water deluge system on various pumps and fin fans
6] Plant start up activities like hydrocarbon inventory, oil flushing, cold circulation, long circulation etc.
7] Inter lock loop checking
8] Plant normalization, optimization & demo run (performance run)
9] Plant normal shutdown & emergency shutdown.

PRESENT WORK PROFILE:
I am working as a FIELD OPERATOR in

1] UOP designed LIGHT NAPHTHA HYDOTREATER UNIT having capacity 29000 BPSD
2] LINDE designed HYDROGEN PLANTS [two train] having capacity 181 MTD each
3] HYDROGEN COMPRESSION UNIT which include three numbers of Reciprocating compressors
4] REFINERY FUEL GAS DISTRIBUTION UNIT which is designed to collect the uncondensed off gases from various units of Refinery and distribute them as fuel and pilot gas to fired heaters in different units.

MY JOB AND RESPONSIBILITIES IN STEADY PLANT ARE AS FOLLOWS
- Continuous monitoring of throughput
- Continuous vigilant in the field by taking rounds at regularly interval.
- Chemical injection rate controlling in HP BFW & Condesate stripper.
- Note down field readings for cross check with DCS. (I.e. LT/FT/PT etc.)
- Pump & Compressor change over / isolation for maintenance.
- Monitoring the smooth and safe operation of rotating equipment like pump, compressor fin-fan cooler, and ID/FD fan of heater, etc.
- Lighting of burners using BMS, Burners change over, Taking Tube Skin Temperature
- Various Field Tests for assessing plant performance like weathering / lead acetate test for LPG, H2s check with dragger tubes, doctor test, taking closed and open loop samples for laboratory testing.
- Checking of firebox and burner flame pattern.
- Ensuring all standby pumps are always in healthy and warm up condition.
- Maintain the record for the future/past shut down job.
- Ensuring strict compliance with safety procedure, work permit procedure.
- Check lube oil/ seal system and oil level in reservoir in RFG compressor.
- Following proper housekeeping to ensure clean and safe work area.
- British Safety Council [BSC] checklists fill up periodically. & Safety Audit checking. Other job instructed by shift incharge and panel operator.
- Punch points list out & rectified as per P& ID, OTHER DRAWINGS.

I have an experience of start up and normal shutdown of the unit successfully. I have also tackled emergencies successfully several times.

VARIOUS EUIPMENTS HANDLED INCLUDE:
- Two stage Double acting Reciprocating compressors [Make: M/S Thomssen International BV, Nehterland] – 3 nos. of 5.3 MW each having capacity of 185,000 Nm3/hr for pure H2 supply to refinery.
- Single stage double acting Reciprocating compressors [Make: M/S Thomssen International BV, Netherland]-2 nos. of 1.3 MW each having capacity of 50800 NM3/hr at gas mol wt. of 5.01.
- Multistage centrifugal pump of 366KW rating [Make: Ingersoll Dresserrand]
- Diaphragm pumps of Capacities ranging from 0.4LPH to 1360LPH.
- Liquid full absorbers & Extractors.
- Single casing two stage Centrifugal Compressor for RFG [Make: Demag Delaval] of 3.5 MW having capacity of 22 TPH of RFG.
- Top Fired Balanced Draft Reformer [Make: M/S Selas Fluid Processing Corp. USA] with 288 tubes & 84 burners. Heat duty of reformer is 195 MMKcal/hr.
- Process Gas Boilers & Steam Generator [Make: M/S Sruthers, USA] both combine capacity to produce HP Steam to tune of 130 T/Hr @ 44.0 kg/cm2 pressure & 392 deg.cent. temperature.
- Pressure Swing Adsorption System. The flow rate through this system is 1,20,000 NM3/hr. of Reformate gas.
- Flue Gas Blower [ID Fan] Cap.: 260000 kg/hr, Combustion Air Blower [FD Fan] Cap.: 19400kg/hr, [Make: Howden]

TRANING PROGRAMM INCLUDES
- Under gone various training modules designed by Reliance, Jamnagar covering all the Process Details/ Operational Training.
- Attended FIRE & SAFETY training imparted by Health Safety and Fire Dept. in Reliance Petroleum Ltd. at Jamnagar.
- Undergone Vocational Training for 06 months at Advanced Training Institute, Sion, Mumbai

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9601 to 9650 of 15477)

Go to Search Parameters...

Brief Description

Service Engineer, Completed Aircraft Maintenance Engineering (3 Yrs)

Over three years title experience in the Barnett Shale. Experience leasing in the Barnett Shale and Fayetteville Shale. Advanced experience using ESRI GIS mapping software.

Instrument Technician with maintenance and commissioning experience

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.

Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.

Looking for a bright career in the field of Supply chain Management.

I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.

Currently attending Saint Tech College and will be graduating in may.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

Operations manager with 30 years experience in the mining industry.

Application for the post of Safety Officer

Project Manager / Engineer, Private & Public Sector Experienced

Safety Supervisor

Application for the Post In Engineering Department

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Interpersonal abilities, Communication skills, 25 years of supervisory experience, Organizational strengths, Analytical/problem solving skills, Administrative, coordination, and management skills, Strong initiative

Seeking a challenging career with in a reputed Company

Proficient in Document Management System & Secretarial Functions

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

Mechanical Engineer with 3 years of experience in electrical instalations

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Senior Qa/QC For Oil/Gas Projects

Senior Electrical/Design/Project Engineer for HV and MV substations

Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

About eight years of solid experience in designing and implementation(execution) of structural works

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 [ 193 ] 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out