Resume - I have retired from the US Army so I am not looking for a benefit package, ie… m...

Misco Jobs

Resume #19487

CONTACT INFORMATION:
View contact information...

1998-Present TRANSOCEAN
West Africa
Mechanic
Working offshore as a Mechanic on an Ultra Deepwater Dynamic
Positioning (DP) Drillship. Involved with the maintenance, inspection and repairs of the following drilling equipment:
Varco:
Pipe Racking Systems (PRS-6I)
I have replaced upper and lower drive shaft and bearings, lower and upper cam followers. Lately I have the opportunity to assist in using a column jacking kit.
Top Drive - TDS-4S
I have good experience troubleshooting hydraulic system.
I have overhauled Upper and Lower IBOPs and is familiar with the procedures in replacing the Upper IBOP in record time.

Continental Emsco:
Drawworks Electrohoist V
I have overhauled clutches and replaced gears and driveshafts.
FC-2200 Mud Pump. I have replaced crankshafts, connecting rods and crosshead liners. Also experienced in alignment of the extension rods and liners.

AmClyde Crane: Unit 20000 & 35000 series
Brandt: Mud Agitators, Vacuum Degasser and Shale Shakers.
General: Nissan Forklift, Centrifugal Pumps, and I have overhauled engines of different makes, etc.
I have also maintained and repaired/overhauled Automated Roughneck (AR-3200),
Automated Fingerboards, Hydraulic Power Units, Hydraulic Actuated
Elevators, Conveyors and Automated Casing Roughnecks.

Mechanic
I have retired from the US Army Watercraft field with an honorable discharge.

Responsibilities:
Transported and installed the rigs on the locations.
Exploitation, maintenance and equipment repairs, such as:
All diesel and gasoline Engines (Caterpillar, Detroit, Lambordini,
Mitsubishi) Power Units, Drawworks, Hook Traveling Blocks, Crown Blocks
Mud Pumps (TMS-500), Rotary Tables, Air compressors (SULLAIR).
Assuring a good function of all mechanic and hydraulic equipment's
I worked as a mechanic in automotive shop having the following responsibilities:Repairing and maintenance of different types of cars like; NISSAN, TOYOTA, IVECO, ASTRA, KENWORTH and Halliburton Cementing
Units.
Involved in all aspects of drilling equipment servicing, inspection, repair and overhaul.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7951 to 8000 of 15341)

Go to Search Parameters...

Brief Description

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry

To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.

Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience

Senior Drilling Engineer & Supervisor

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL

Bachelor of science degree holder with skills in mineral exploration

am energetic agrresive,have interpersonal skills good communication skills,profficient in microsoft suites and a bsc degree

2 yrs exp in piping engg and pdms ,mechanical engineer

.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.

Document controller, 2-year experience with the largest private master developer in the UAE

B.E.S (Equivalent to Master) Environmental Sciences

Plate welder (SMAW,FCAW,GTAW)

Bsc Environmental Health, certificate in advanced project management,2years experience in the field of environment, computer literate

Mechanical, Fitter, Basic Welder and Electrical

8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.

Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008

Exploration geologist with two years of experience in the uranium exploration field.

Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project

Ship Design Engineer - Piping & Machinery

welder

Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.

Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.

BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Three year working experince in field of hydrogeology and hydrochemistry.

Project Manager

Experienced sandblaster/painter/foreman/safety tech

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.

Control room operator-process operator-gas-lift operator-gas dehydration-..

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

Heavy machinery operator, foreman

PhD and MD in Mining Engineering, Environmental Pollution due Mining Activity, Assesment Impact of the Mining Industry on the Environment

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

Hydraulic Design, Troubleshoot, Repair and Manufacture

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

Fire Marshall or fire Captain

Construction Engineer with core skills in Project Management, Contracts, Facilities and Value Engineering

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

25 years experience in mining Supervisor / Management positions. Proven skills of managing, organizing,planing,problem solving. Proven leadership, communication and decision making skills. Troubleshooting and resolution of mechanical problems.Budgeting, scheduling. Team building, leadership.

I have a lot of years of hands on experience in the plumbing industry I can lead large groups of technicians effectively through out all phases of any construction project. I strongly believe that I can easily handle any job regardless of size

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.

Project Planning & Coordination, Cost Control & material Procurement

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

Reservoir development, geologic modeling Landmark

I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA

First Prev 151 152 153 154 155 156 157 158 159 [ 160 ] 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out