Resume - PhD in physical chemistry. 8 years experience in environmental management, monit...

Misco Jobs

Resume #21502

CONTACT INFORMATION:
View contact information...

QUALIFICATION
Dr Massimiliano Porcelli's primary fields of research specialization are computational chemistry and modelling and physical chemistry with particular emphasis on biological system and environmental problems. After getting his degree he participated to different research project carried out by the NMR group of the Cagliari University increasing his experiences in the analytical field using different instrumental techniques (GC-FID, GC-MS, ASE etc..). During this period the collaboration with CRS4 staff provides him the experiences in using chemometric analysis tools and different type of simulation packages
In 1996 he started his collaboration with the Battelle memorial institute foundation and from that year he has been collaborating with them (up till now) on different type of projects, always related to environemtal problems, varying from the development of specific instrumentation for monitoring pollutant in environmental matrix to the development of remediation programs for contaminated areas.
In particular in the period 1996-1999 he worked as researcher for the development of air monitoring instrumentation and after that he continue the collaboration with battelle developing air quality plan proposal for Milan, Cagliari, Naple in Italy and remediation plan for different other site in Italy regarding the soil and water compartment.
In the last 5 years he increased his experience and expertise in GC-MS and GC-FID techniques used in the enviromental forensic field for the fingerprinting of the Petroleum Hydrocarbon Spill with Battelle. He worked as Senior Chemist in the UNCC project in Saudi Arabia related to the damage claim for the 1991 Iraqi Aggression and actually he is the Lab Operation Director in Central Enviromental Laboratory in Kuwait managing the analytical activities related to the Kuwait claim for the environmental and health damage due to the 1991 Iraqi Aggression.

EDUCATION
1996-2001
Università degli Studi di Cagliari, Facoltà di Scienze
PhD course in chemistry
Thesis: "Determination of the solution secondary structure of two cyclic pentapeptide antagonist of the neurokinin"

1995
Università degli Studi di Cagliari, Facoltà di Scienze.
Master
Study of the correlation between activity and structure in molecules having biological origin (grant from Sardinia Regional Office)

1989- 1994
Università degli Studi di Cagliari, Facoltà di Scienze.
Degree in chemistry, final evaluation 110/110 cum laude.
Thesis: " Structure determination of cyclic polypeptide using NMR techniques and molecular dynamics simulation"
Specialities: Physical chemistry and theoretical chemistry (Computational techniques both empirical and quantistic, molecular mechanics and dynamics, and other simulation and correlation techniques), NMR (1D and 2D) and other spectroscopic techniques, ITMS, and also analytical chemistry with practical experience in using GC-MS, GC-FID and extraction techniques (like ASE).

ACTUAL ACTIVITIES
- Scientific Consultant and collaborator, for the Battelle Memorial Institute foundation activity in the Mediterranean area.

- Supervision and consulting activities in the analytical chemistry area with particular attention to GC application and extraction techniques in the determination of soil and sediment contamination.

EXPERIENCE
2004 up till now
Lab Operation Director in the CEL (central environmental laboratory) Lab in Kuwait. The operation include the management of 55 employee for carrying out the analysis of different chemical parameter related to the UNCC claim of Kuwait for the 1991 gulf war. The Chemical Parameters cover organic and inorganic analysis with particular attention to GC-MS and GC-FID techniques for the determination of PAH, TPH profile and biomarkers, and GC-ECD techniques for the quantitation of nitroaromatics and Pest/PCB's compounds in groundwater, seawater and soil/sediments. The lab was recently accredited ISO 17025.

2003
Senior chemist and lab supervisor in the Battelle-PME (presidency of meterology and environment laboratory in Saudi Arabia (Dammam) for the development of the UNCC project related to the evaluation of the environmental damage due to the 1991 Gulf war. The collaboration finished on the 31 of October 2003. During the period I trained the staff, and coordinated, supervised and managed all the activities of the lab, reviewed all the SOP's and prepared the SOP for the trace metal analysis of soil and fish tissue sample.

2001-2002
- Consultant for the Soltec scarl that provides services in the environmental sector.
- Consultant for the SACESV and Maim Engineering for the management of the incinerator wastes of the Ottana industrial area

- Consultant for the consortium Venezia-Battelle for the co-operation activities in the Balkan region supported by UNOPS

- Consultant for Cooperazione Italiana and UNDP in the Balkan region for the development of the air monitoring system for the Pancevo industrial area

- Proposal manager and supervisor for the consortium Battelle21 and Battellemed

- Employed by the company Soil Restoration Srl for carrying out the activities related to the MURST project: a) Ambiente & Territorio, b) Kenaf Valorization

1999-2001
- Delegated administrator of the company T&Tnet scrl (1999-2001) having as company objective the development of research and services in the environmental, health and agrochemical sectors

- Scientific Consultant and collaborator, for the Battelle Memorial Institute foundation activity in the Mediterranean area.

1998-1999
Scientific Responsible and human resource manager at the INNOVA Consortium

1996-1999
Researcher at the Consortium CRA (SARAS Spa, Battelle, Sofinter, Florys) for the development of air monitoring instrumentation, air quality plan and soil remediation plan getting experience in the analytical chemistry finalized to the characterization of the contamination in different environmental matrix

1996-1997
One year training at Columbus Battelle Facilities centre in environmental sciences to develop new air monitoring devices (1996-1997). Practical experience in the use of the GC-MS and GC-FID instrumentation, for analytical purposes, and in using extraction techniques with particular attention to ASE.

1996-2001
PhD thesis and research work on two cyclic pentapeptide antagonist of the neurokinin (NMR, 3D structure modelling, chemometrics and molecular dynamics calculation.

1995-1996
Researcher in Studies for the determination of the geographical origin of the olive oils using the SNIFF techniques and the PCA (1996)

1993-1994
Bachelor Degree Thesis work: Studies on the structure determination of polypeptides in solution using both NMR (1D and 2D techniques) and computational techniques (from 1993)

FOREIGN LANGUAGES
Mother tongue Italian, fluent in English

COURSES
- Course on the pesticides in the Mediterranean food 1999
- Computational techniques course (Bristol) 1997
- National School on Synchrotron light1995
- Study on the application of Mass spectrometry in environmental matrix1995
- English course (12/95 - 03/96)

COMPUTER
Good acknowledgement of VMS, UNIX, WINDOWS 95/98/NT, Mac environment, Fortran and C programming language.
Good experience with statistics type of program (Sigmaplot, chemometric analysis program, clustering program etc..) and with all windows standard application and utilities, Graphics software and simulation software (Amber, gromos, X-PLORR, Simion, and dispersion software for environmental purposes), good acknowledgement of the network system administration and related problems. This wide, even if not dedicated, experience derive from my collaboration with the university environment and specifically because of my collaboration with CRS4 Staff during his Bachelor Thesys and the Computational Center of the Cagliari University during his PhD Thesys work.

PUBLICATIONS
- D. Atzei, D. Defilippo, A. Rossi, M. Porcelli: X-Ray Photoelectron spectra of palladium II, platinum II, complexes with the 1,3-tiazolidine-2-tione. Aquantum mechanic study of the free ligand. Spectrochimica Acta, part A vol. 57, page 1073-1083 (2001)
- Proceeding of the "International conference on Magnetic Resonance in Biological Systems" Firenze 2000
- Cyclic pentapeptides of chiral sequence DLDDL as scaffold for antagonism of G-Protein Coupled Receptors: Synthesis, activity and conformational analysis by NMR and molecular dynamics of ITF1565 a substance P inhibitor (Biopolymers, 1999,vol. 50, pag. 211-219)
- Proceeding of the XXIX Congress of Chemical physics Taormina 10/05/98
- Proceeding of the congress "Air pollution 98" (September 1998)
- Peptides: chemistry, structure and Biology; Kaumaya, P.T.P., hodges R.S., editors; mayflower scientific: birmingan 1996, pg 497-498
- Proceeding of the presentation "Continuous Real Time Breath analysis of VOC to determine Exposure-Dose Relationship" at the Society for Risk Analysis (Louisiana December 1996)
- Conformation of new cyclopentapeptide neurokinin antagonist in solution - Pinori, Cappelletti, Di Gregorio, Porcelli, Murgia, Mascagni (proceeding of the congress – OHIO 1995)

PRESENTATION
- Two copyrighted project for the development of integrated network platform for the management of the health care services (home and hospital care)
- Presentation of my PHd work at the XIX International Conference on Magnetic Resonance in Biological System – firenze 2000
- Presentation of the Phd Work at a workshop organized by SAPIO about NMR techniques and application – Cagliari June 1999
- Presentation of my PhD work at the Chemical Physics congress in Taormina (10/5/98)
- Presentation of the work carried out in collaboration with the Battelle Staff at "Air Pollution 98" (September 1998)
- "Continuous Real Time Breath analysis of VOC to determine Exposure-Dose Relationship" presented at the Society for Risk Analysis (Louisiana December 1996
- Conformation of new cyclopentapeptide neurokinin antagonist in solution al Fourteenth American Peptide Symposium (18-23 June 1995)

Reference
Available on request

I grant permission for my personal information to be used as stated in the 675/96 law

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6501 to 6550 of 15512)

Go to Search Parameters...

Brief Description

I have done my Masters degree and P.hd in Geology, I have been working in the field of Watershed Hydrology and have an experience of hilly watersheds in Himalayas of North India and forested watershed of South India.

Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field.

Electrical and Instrument Technician, 20 years international experience.

Perhaps you are looking for an experienced Security, Surveillance and Investigations Management professional, who is highly skilled in all aspects of highly sensitive investigations, corporate security, surveillance and asset protection?

I can offer extensive supervisory experience in the oil and gas industry,

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

Well Test Supervisor for Canadian Superior, based in Port of Spain and offshore Trinidad. Responsible for onshore planning and Wellsite supervision of High Rate Gas Well Tests.

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

Field Manager/ Operations Supt. with experience managing international oil/gas projects.

Maintenance and technical background in mining as well as transport industries.

BE Chemical Engg. Experience in Multinational Storage terminal Ship loading/ unloading of Acids, petrochemicals and LPG.

I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant.

Information systems - Analyst /Programmer/Project leader/Business Analyst

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

PhD in physical chemistry. 8 years experience in environmental management, monitoring, damage evaluation and quality system. previously worked in Battelle Memorial Institute structure. previously worked in Saudi Arabia. focused, hard worker, responsible with high leadership skill.

CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

Multifaceted, proactive, and highly motivated professional seeks position within the mining, construction, transportation, or chemical process industry combining solid skills and diverse experience

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons.

Heavy Duty Mechanic Certificate -IP:K-06-14390 Inter-provincial Red Seal Certificate -23 years experience in the mining field -16 years experience as Heavy Duty Mechanic (underground and open pit)

30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric

Finance Professional with extensive experience in accounting, internal and external financial reporting, systems, business planning, operations analysis and international operations. Leadership experience in both corporate and operating unit environments, within the United States and Latin America.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems.

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

OBJECTIVE To secure a position within a growing organization in which my talents, attributes and experience could be utilized to their maximum potential.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

Last employer: Lidl Ireland Ltd. as District Manager. International experience

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Geodesist/Land Surveyor/Geomatics/GIS consultant

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 [ 131 ] 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out