Resume - Risk Assessment Studies, Safety and Environmental Audits, Environmental Manageme...

Misco Jobs

Resume #2320

CONTACT INFORMATION:
View contact information...

RESUME

Date of Birth: 6th June, 1974

Social Status: Married

Passport No.: A 2667586 Valid upto February 24, 2007

B) EDUCATION

B.E. Chemical - Tatyasaheb Kore Institute of Engineering & Technology, Kolhapur, Shivaji University - July, 1996.
76.7 % ( Ist Class with Distinction), IInd Merit Rank in Shivaji University.

Diploma in Environmental Management & ISO 14000/14001 -
All India Institute of Management Studies, Chennai - August, 1998.

Diploma in Industrial Safety - Indian Council of Labour Management,
Chennai - November, 1998.

Presently pursuing Post Graduate Diploma in Operations Management from Indira Gandhi National Open University, New Delhi.

C) TRAINING

1-Week Training Course on Hazard Analysis in Chemical Industry organised by Prof. J.P.Gupta, Chemical Engineering Dept., IIT Kanpur in Baroda, Sept. 1998.

2-Day Training Course on Software Package PHAST (Process Hazard Assessment Software Tool) organised by DNV Technica, UK and Bell Engineering Software Technologies, Pune in Mumbai, February 2000.

D) PROFESSIONAL AFFILIATIONS/ MEMBERSHIPS

Member, Indian Environmental Association

E) EMPLOYMENT RECORD

December 1996 to Date - Senior Environmental Engineer,
Jacobs H&G Private Limited), Mumbai, India
(Subsidiary of Jacobs Engineering Group Inc., USA)

F) WORK EXPERIENCE

March 2002 -

* Involved in Corporate Environmental, Health and Safety Audit for Abbott India Limited's Pharmaceutical Formulations Unit at Verna, Goa through Jacobs Gibbs, UK.

* Involved in Preparing Specifications and Evaluating Offers for Decarbonisation Oven Package (Incinerator) for Johnson Matthey Chemicals, Chemical Catalysts Plant, Taloja.

* Involved in Conducting Safety Audit Compliance Status as of September 2002 for Resins, Inks and Adhesives Plants (5 Units) of Hindustan Inks and Resins Limited at Daman, Silvassa and Vapi, Gujarat.

* Involved in Preparing Feasibility Report on Sewage Treatment Plants for Reliance Petroleum Limited, Truck Stops Project.

* Involved in Preparing Specifications, Technical Bid Analysis & Technical Recommendation and Review of Drawings of Oil Water Separator Package for Reliance Petroleum Limited, Multipurpose Chemical Terminal Project at Bhopal, Madhya Pradesh.

* Involved in Conducting Pre-Drilling Environmental Impact Assessment Studies and Post Closure Environmental Assessment for Essar Oil Limited, Oil & Gas Exploration Project, Rajasthan.

* Involved in Establishing Environmental Baseline Status for Development Project Site of Kingston Properties Private Limited at Goregaon, Mumbai.

March 2001 - March 2002

* Involved in Conducting Risk Analysis Studies & Safety Audits and Preparation of Disaster Management Plans for Resins, Inks and Adhesives Plants (5 Units) of Hindustan Inks and Resins Limited at Daman, Silvassa and Vapi, Gujarat.

* Involved in Risk Assessment Studies and Preparation of Disaster Management Plan for Synthetic Rutile Plant of Austpac Resources NL at Chhatrapur, Orissa.

* Involved in preparation of Environmental Impact Assessment Reports and providing assistance for obtaining Environmental Clearances from Ministry of Environment & Forests / Gujarat Pollution Control Board for Pesticides Plants of Bilag Industries Limited and Mitsu Limited at Vapi, Gujarat.

* Involved in preparing Rapid Environmental Impact Assessment Report as per Environmental Guidelines laid down by International Finance Corporation for proposed PVC Plant at Cuddalore, Tamil Nadu.

* Involved in Conducting Risk Analysis Studies for Mono Ethylene Glycol Expansion Project of India Glycols Limited at Kashipur, Uttaranchal.

* Involved in providing Assistance for obtaining Environmental Clearance from State Pollution Control Board for Catalyst Manufacturing Project of Johnson Matthey Services Limited near Hyderabad, Andhra Pradesh.

March 2000 - March 2001

* Involved in Conducting Safety Audits, Risk Analysis Studies, Ecological Risk Assessment Studies and Preparation of Disaster Management Plans for Pesticides Plants of Bilag Industries Limited and Mitsu Limited at Vapi, Gujarat.

* Involved in Conducting Risk Assessment Studies for Vinyl Chloride and Utility Fuel Storages of PVC Plant at Cuddalore, Tamil Nadu.

* Involved in Conducting Risk Assessment Studies and Preparation of Disaster Management Plan for LPG TOPs, Bulk Dispatch & Bottling Plants of Hindustan Petroleum Corporation Limited at Loni, Uttar Pradesh and Ajmer, Rajasthan.

* Involved in Conducting Risk Analysis Studies for Blast Furnace and Cold Roll Mill Complex Projects of Essar Steel Limited at Hazira, Gujarat.

March 1999 - March 2000

* Involved in Environmental Audit and Upgradation of Environment Management including Effluent Treatment Plants and Sewage Treatment Plants for Chlor-Alkali, Chloromethanes and Chlorofluorocarbon Plants at Mettur, Tamil Nadu.

* Involved in Conducting Environmental Impact Assessment Studies for Essar Oil Limited, Oil & Gas Exploration Project, Rajasthan.

* Involved in Basic Design & Engineering, Preparation of Enquiry Requisition, Review of Vendor drawings for Effluent Treatment Plant of Smithkline Beecham Consumer Healthcare Limited, Malted Food Project at Sonepat, Haryana.

* Involved in Preparation of Safety Report and Conducting Safety Audit for Mitsu Industries Limited, Pesticide & Intermediates Plant at Vapi, Gujarat.

* Involved in Conducting Risk Assessment Studies for Naphtha Cross Country Pipeline of Hindustan Petroleum Corporation Limited at Hazira, Gujarat.

* Involved in Design of Sewage Collection Network & Disposal, Layout and Details for:

1) Saint Gobain Glass India Limited, Float Glass Plant at Sri Perumbudur, Tamil Nadu.
2) Oswal Chemicals & Fertilisers Limited, Phosphate Fertilizer Complex at Paradeep, Orissa.

March 1998 - March 1999

* Involved in Conducting Risk Assessment Studies and Preparation of Disaster Management Plan for Mitsu Industries Ltd., Pesticide & Intermediates Plant at Vapi, Gujarat.

* Involved in Preparation of Purchase Requisition, Coordination and Review of Drawings for Effluent Treatment Plant of Cochin Refineries Limited, DHDS Project at Cochin through Larsen & Toubro Limited, Baroda and Engineers India Limited, Delhi.

* Involved in Conducting Risk Assessment Studies for:

1) 2 km. long dedicated Para-Xylene Pipeline of Mitsubishi Chemical Corporation PTA India Pvt. Limited, Haldia, West Bengal.

2) Nylon - 6 Plant of Gujarat State Fertilisers & Chemicals Limited, Baroda.
3) LPG and Utility Fuel Storages of Saint Gobain Glass India Limited, Float Glass Plant at Sri Perumbudur, Tamil Nadu.

* Involved in Basic Design & Engineering and Preparation of Enquiry Indent for Sewage Treatment Plant of Saint Gobain Glass India Limited, Float Glass Plant at Sri Perumbudur, Tamil Nadu.

December 1996 - March 1998

* Involved in Preparation of Feasibility Report and Detailed Engineering, including P & IDs, Layout, Piping & Equipment Specifications, Coordination and Review of Drawings etc., of Effluent Treatment Plant for Mitsu Industries Ltd., Pesticide & Intermediates Plant at Vapi, Gujarat.

* Involved in Coordination and Review of vendor drawings / documents of Effluent Treatment Plant for ICI India Limited, Solvent Borne Paints Plant at Mohali, Chandigarh.

* Involved in Preparation of Environmental Impact Assessment Report for ICI India Limited, Solvent Borne Paints Plant at Mohali, Chandigarh.

G) COMPUTER PROFICIENCY

* Windows - MS Office, Word, Excel, Power Point
* Proficiency in Packages like Flow 3, PDSF (Pressure Drop Calculations)
* Proficiency in Specialized Software Packages like PHAST (Process Hazard Assessment Software Tool) and WHAZAN II (World Bank's Hazard Analysis) used for Consequence Analysis in Risk Assessment

Have also been involved in Preparation of Techno-economic proposals / offers related to Environmental Upgradation, Environmental Impact Assessment Studies, Risk Analysis Studies, Safety & Environmental Audits, Disaster Management Plans, Effluent Treatment Plants and Sewage Treatment Plants.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9451 to 9500 of 15497)

Go to Search Parameters...

Brief Description

International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atlas as a Wireline Logging Engineer, Masters Degree in Petroleum Engineering, B.Sc Undergraduate degree. Currently in Perth, Australia and willing to relocate OR work on rotational basis

5 years of full-time experience in Refinery, Chemicals. An Engineer with MBA.

To utilize extensively my Technical and Business skills in an Engineers role, particularly bring about change in an Organization to improve system and procedure, Cost Control, Management reporting and strategic Planning in order to maximize profit and minimize risks

Diploma In Mechanical Engg. with 6 Yrs exp in Piping Designer

Bachelor of Science in Civil Engineering

I have been working in the mining environment for 9 years and the last three of which have been as mine supervisor at Lac Des Iles Mine. Prior to supervising I was a Heavy Equipment Operator, Blast Technician, Site Services Operator, and Haul Truck driver.

Bachelor of Biotechnology Industry (2nd class upper-3.44)and have skill in molecular work(PCR,RT-PCR,Squencing,Bioinformatics software&tools).

An Environmental Engineer with Water Resources/Geological Engineering background. He also has four years of experience in a Gold Mine as a Geologist.

Civil Engineer, Civil maritime engineer

Computer ?Automation & Controls Engineer

Welding Engineer, Welding Inspector CSWIP, Mechanical Engineer

corrosion failure analysis and corrosion protection

i am working as utility technician in petrolium refainary and i know very well electrical fault&problem i am know ms word/exell and data update

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

Mechanical Senior Engineer (Rotating Equipment)

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Manager of gas contracts totalling 10M therms/day and deliveries to 1875MW Teessie Power Station

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

10+years Instrumentation/Electrical/Control system experience, Canadian Journeyman Instrument Mechanic Certificate, Electrician ticket: Certified Engineering Technologist

Petroleum Engineer Oilfield experience 2 years Electricity Diploma.

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP, Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Administrative, Sales, Strong Customer Service

15 years Accounting / Administrative experience in Australia. Currently visiting South Africa but ready to move on and explore more of the world.

Landman. Experience in mostly the Rocky Mountain States. Lease Acquisition, Title Research, and Right-of-way.

I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.

Seakes International employment in the oil/gas industry, in areas of completions(perforating ), Production engineering. Has 9 yrs working experience as a perforating Engineer with Halliburton energy services in Nigeria.

Extensive management, administrative, financial and contractual experience.

Honours / Master of Science Graduate in Chemistry with extensive laboratory and moderate industrial experience. Interested in chemical research and development as well as industrial experience.

Continuously enhancing my expertise in manufacturing and my education on engineering management area by consistently contributing to the company.

JOb requires for B.E. ( Fire ) and DIS safety Engineers. Experience : 12 years in Petrochemicals Industries.

To secure a position with a progressive firm utilizing my diversified material management capabilities.

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

To secure a position within a company with longevity and growth potential, while enabling me to utilize my practical skills and experience

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

INDUSTRIAL / COMMERCIAL EXPERIENCE : Water Treatment Chemicals and equipment, Mining, Food, Specialty Gas

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Degree in Chemical Engineering from a prestigious university. About 9 years of Experience in teaching and training related to oil sector. Train – the - Trainer certificate from the employer. Knowledge of and experience in the use of Computer Applications. Excellent communication skills in English.

I am a mechanical engineer graduated from Hungary –Budapest in 1991, specialized in gas turbines field and I have been working for the past 9 years in gas turbines maintenance.

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Training, education and experience in health, safety and the environment.

I am a talented and hard-working individual, committed to the environment, seeking to gain experience in an environmental field.

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

Fifteen years experience in Process Plant Construction in the UK, Europe, Middle and Far East with regards to QS duties and Contract Administration on behalf of the Contractor.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 [ 190 ] 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out