Resume - Erection, Commissioning & Trouble shooting of Rotary Kilns, Ball Mills, Vertical...

Misco Jobs

Resume #23589

CONTACT INFORMATION:
View contact information...

SYNOPSIS: Consulting as well as hands on experience of Cement Plant machinery (Dry & Wet Process) installation, commissioning, operation & maintenance (trouble shooting and maintenance planning) in F.L. Smidth equipments with subsequent involvement in documentation. Similar exposure to other Cement plant Auxiliaries such as process Fans, Material Transport Equipment by suppliers such as ABB, Aumund, Rexnords elevators, etc.

Special experience on FLS Rotary kilns, Electrostatic Precicipitator (FLS- miljo), Atox Vertical Roller Mills & Central/Side Driven Unidan Mills with both Slide shoe & Truninon bearings, Refractory for Dry process kilns.

Additional Sales experience in marketing of Refratechnik refractory, Bricking solutions (refractory demolition machines & brick laying machines for rotary kilns) and Steel Castings for Cement & Quarry industries.

Employer: Binani Cement Factory LLC, Dubai
From: July 2005 till date.

Company Profile: Leading Industrial giant from India diversified into Cement, Zinc, Copper, Fibres and other core Engineering activities having Slag as well as Clinker grinding unit with 500,000 TPA capacity expanding to 1,000,000 TPA in Jebel Ali near Dubai.

Job Responsibilities: Incharge of Erection, commissioning and Fabrication, of F.L.Smidth designed Clinker grinding machinery (UMS 42 X 11), Sepax Seperator and other auxiliaries. Liasoning with OEMs, contractors and higher management.

Employer: Nigerian Foundries Limited, Lagos
From: January 2004 to May 2005.

Company Profile: West Africa's leading foundry offering cast iron, cast steel, heat resistant castings, wear resistant castings for Cement plants, construction companies, quarries, oil companies and telecom industry. The company is existing in Nigeria since 1965 and has gradually expanded into offering technical solutions and specialized castings well backed by state of art manufacturing facilities & laboratories supported by ISO 9001-2000 quality system.

Job Responsibilities: Fabrication and erection of cement plant machinery. Follow up of performance of already supplied castings. Failure analysis, trouble shooting and installation of castings for cement plant.

Employer: The Consultants, India (Indian representatives for Refratechnik Germany, Brokk Bricking Solutions Inc. USA & Brokk AB, Sweden, Pillard Thermotechnique, France

Duration: From 08.08.2001 to 31.12.2003
Position held: Manager – After Sales & Services.

Nature of Work: Site visits for technical study of system layouts for Cement, Steel and non Ferrous industries prepare techno-commercial bids for Bricking Solution equipments, Refractory for Cement Kilns, Electric Arc Furnaces, Steel ladles, etc. To carry out investigation of Refratory Failure and recommend corrective actions. Commissioning and troubleshooting of De-bricking and brick laying machines.

Employer: Larsen & Toubro Limited, India (Indian Engineering Major in Turnkey Projects & Consultancy in Cement, Petrochemical, Power, Fertilser and other core industries).

Duration: From 06.09.93 to 08.08.2001.

Position held: Started as Site Engineer for Cement Plants & Allied Machinery Division (L&T – F.L. Smidth joint technical venture) till May 1998 was transferred to Services and troubleshooting division.

EDUCATIONAL QUALIFICATIONS:
* Diploma In Mechanical Engineering (Industry Integerated) from L&T Institute of Technology (affliated to Bombay University) in June 1993 with Distinction.
* Higher Secondary from Fr. Agnel Junior College in Science stream with Mechanical Maintenance.
* Secondary schooling from Fr. Agnel Multipurpose High School with Technical Subjetcts.

TRAININGS ATTENDED:
* MS-Office, SAP.
* Refractory Technology from Refractechnik.
* Commissioning & Troubleshooting of Brokk demolition Machines in Sweden.

EXTRA CURRICULAR ACTIVITIES:
Cricket, Reading and Listening to Good Music.

ANNEXURE:
MAJOR PROJECTS HANDLED FOR L&T FLS:

1. Tata Refractories Limited (Nov. 93 to Jan. 95):
Erection, Commissioning and performance guarantee of FLS design Dolomite Rotary Kiln with rotary Cooler and Hot Electrostatic precipator (FLS miljo).

2. DLF Cement (FLS designed 1.5 Million Tonnes per annum Dry Process Plant) (Feb. 95 to Aug. 95):
Erection, Commissioning and performance guarantee of Rotary Kiln 4.35 X 65m (FLS- ILC Preheater), Atox Coal Mill, Coolax Cooler, Cooler ESP, UMS 46 Cement mill & Limestone Stacker Reclaimer.

3. Jaypee Bela Cement (FLS designed 1.7 Million Tonnes per annum Dry Process Plant)(Aug.95 to Aug.97):
As Resident Engineer for erection, commissioning, performance guarantee of Rotary Kiln 4.75 X 75(FLS-SLC), CF Silo, Coolax Cooler ME14102, Entire Cement department involving UMS 46 X 16.5 (Centrally driven)- 2nos. with Sepax Seperator, Electrostatic precipitators-4nos., Fly Ash Dryer, all process fans, Aumund & Rexnord Deep Conveyors & Bucket Elevators, Cement Silos and all other auxiliaries such as Bag Filters, air Slides, Drag Chain Conveyors, Dosimat Feeders, solid Flow meters, CP pumps, etc.

4. L&T Cement, Tadipatri (FLS designed 2 million tones per annum Dry Proces Plant)(Aug.97 to May 98):
Erection & Commissioning of Vertical Roller Mills (Atox 50 Raw Mill, Atox 27.5 Coal Mill), UMS 46 X 11 Cement Mills with Koppern Roller Press, Electrostatic Precipitators & Beumer make belt bucket elevators.

Was transferred to Technical Services as Service Engineer in May 98.

MAJOR TROUBLE SHOOTING, BREAKDOWN & MAINTENANCE SERVICES ATTENDED:
1. ACC, Madhukunda: Re-furbishment RC 12 Mechanical Packer.

2. Lafarge Cement, Bilaspur: Control of vibrations for Coal Mill drive, Re-alignment & welding of Kiln Girth Gear.

3. ACC, Kymore: Overhaul of Atox Coal Mill & Weld repair, boring/reaming and re-alignment of TUMS 56 Raw Mill.

4. DLF Cement: Machining, re-alignment & blue matching of Slide ring & Slide shoes for UMS 46 and overhauling Dynamic Seperator for Atox 42 Raw Mill.

5. Gujarat Sidhee Cement: Boring, Reaming & re-alignment of Kiln girth gear.

6. Grasim Cement: Re-alignment of kiln Girth Gear and Axial thrust adjustment of Kiln support Rollers.

7. Madras Cement: Over haul of Coal Mill ESP.

8. Tata Refractories: Rotary Cooler breakdown support roller & bearing replacement, re-alignment, axial thrust adjustment of rotary kiln & Cooler.

9. Jaypee Rewa: Re-alignment of all the kiln support rollers & bearings, girth gear shiming and axial thrust adjustment. Overhaul of Coal Mill ESP, Cooler ESP, Raw Mill ESP.

10. ACC-Chanda: Raw Mill diaphragm shifting and installation.

11. Binani Cement: Overhaul of Atox Raw Mill 42.5.

12. Binani Cement, Dubai: Girth Gear inspection and contact adjustment, Cement Silo extraction stablization.

13. Gujarat State Fertilizers: Granulator & Dryer alignment.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6051 to 6100 of 15512)

Go to Search Parameters...

Brief Description

Stress Analysis(Caesar-II,Rohr2),Piping Layout(PDMS),Support ,Isometrics,Material specification,Autocad,Microstation

Good knowldege in LNG Regasification and processing, drilling fluids and refinery operations etc. I like to take risks and find appropriate solution to it. This factor encourages to make my career in oil and gas industry. I like to contribute more to the company and scoiety.

As you will note on the enclosed resume, the breadth of my expertise covers a wide area of responsibilities. I have leadership, analytical and team work skill. I am recognized for flexibility, adaptability and for a high degree of expertise in the accounting or finance field.

MECHANICAL ENGINEER in the field of construction

Oil Industry Business Builder

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

Civil & Structural & QAQC Construction Superintendent

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

Erection, Commissioning & Trouble shooting of Rotary Kilns, Ball Mills, Vertical Roller Mills and Electrostatic Precipitators.

Reservoir engineer Developing, maintaining and implementing integrated field depletion plans with the aim to maximize economic return

Quality Assurance Manager, ISO9001 and AS9100

Professional Geologist with more than 3 years experience in Porphyry Copper-Gold/High-Sulphidation Epithermal Copper-Gold and Epithermal Gold-Base Metal Projects and Prospects in areas of South Cotabato, Surigao del Sur, Davao Oriental and Agusan del Sur, Mindanao; and Negros Oriental, Central Cebu

QA/QC ENGINEER E&I

Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also

Metallurgist with 4 years experience in base metals. Graduated with a Bachelor's Degree in Mineral Process Engineering 1st Class Honors. Enthusiastic and works well in a team or independently

Almost 5 years experience in Engineering and Detailed design, 5 years in field supervision in Oil & Gas, LNG & Petrochemical Plants.

Self motivated individual with the desire to continually increase my knowledge.

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

LOGISTICS, SHIPPING, BILLING, SAFETY OFFICER

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

Oil and Gas Lawyer (Masters Degree)

As the Cost Engineer in one of the leading owner and operator of FPSOs, my main task is to provide effective cost control measures for the ongoing conversion projects. Good interpersonal skill is an important aspect as my role requires liaison with various parties of the hierarchy from

MSHA Qualified Electrician, Part 77.103 since 1993/ Instrumentation/ HVAC

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Customer support , service engineer, bio medical engineer

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Mining Engineer

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Experinced seaman of over 12yrs on boats

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

Coal Bed Methane Drill Site Supervisor

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 [ 122 ] 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out