Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2393 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION
M.S. in Civil and Environmental Engineering Received April, 2002
University of Pittsburgh, Pittsburgh, PA

B.S. in Chemistry and Environmental Engineering Received July, 1998
Beijing Polytechnic University, Beijing, P.R.China

EMPLOYMENT

1. Intern Engineer April, 2002 - March 2003
Main Wastewater Treatment Plant, East Bay Municipal Utility District
2020 Wake Ave. Oakland CA 94607
* Participated in a recycled water project, conducted feasibility study on plant secondary effluent tertiary treatment, using membrane filtration technique. Familiar with related CA regulations and permitting issues.
* Operated membrane filtration pilot plant, sampling and analyzing pilot effluent. Assisted in the pilot installation, start-up, maintenance and trouble-shootings.
* Conducted a pilot study on digester upgrade - Poultry Blood Digestion Pilot Study, compared full-scale digester data with pilot data, evaluated project feasibility, prepared reports and documents for the presentations to FDA.
* Conducted activated sludge analysis and data reduction in a selector study to improve activated sludge settleability.
* Assisted the planning and design of new vortex grit chambers in the plant, prepared documents and equipment specifications.
* Collected and analyzed wastewater treatment data, landfill leachate, and septage data for an ammonia source control project in North Richmond Water Reclamation Plant.
* Participated in a plant test on Primary Sedimentation Tank odor control, conducted sampling and H2S, Cl2 measurements, also evaluated the efficiency of ferric chloride dosage based on the plant operational conditions.
* Conducted a digested sludge dewatering test to evaluate the performance of thermophilic and mesophilic digestion processes.
* Conducted wastewater sample analysis using EPA methods, such as: color, turbidity, TSS, BOD, COD, ammonia, ortho-phosphate, etc. Familiar with wastewater sampling methods, sampling apparatus, and laboratory equipment.
* Cooperated with plant engineers, operators, and laboratory personnel on project schedule, cost estimation and purchase.
* Wrote O&M Manuals for plant Primary Sedimentation, Grit Removal System, Plant Utilities, and Scum Handling Facilities. Developed intranet website.

2. Graduate Research Assistant August, 1999- April, 2002
Department of Civil and Environmental Engineering, University of
Pittsburgh, Pittsburgh PA
* Developed an adsorption technology to reduce mercury in coal fire power plants using activated carbon impregnated with sulfur through H2S oxidation.
* Investigated activated carbon properties and performance in sulfur impregnation process (GAC, PAC, and different material based activated carbons).
* Summarized EPA and DEP regulations, guidelines, emission inventories, and hazardous air pollutant control technologies regarding to coal fire power plants, refineries, natural gas processing facilities, and sulfur recovery plants.
* Familiar with environmental methods and proficient in operating equipment, such as: HPLC, GC, AA, MS, IR, TGA, Mercury cold-vapor analyzer.
* Excellent in technical writing and data analysis.

3. Intern Engineer September, 1997- February, 1998
China National Environmental Monitoring Center, Beijing, P.R.China
* Participated in QinHuai River water quality assessment project. Assisted in the real-time monitoring program, data collection, and report writing.
* Assisted in a research project on hazardous organic materials in water system and their impacts on public health issues.

4. Intern Engineer September, 1996- February, 1997
Beijing Drinking Water Treatment Plant (Groundwater Branch), Beijing,
P.R.China
* Assisted daily operation of water treatment processes. Conducted routine checking and record keeping.
* Conducted raw water and finished water quality monitoring: color, odor, TSS, DO, BOD, COD, iron, zinc, magnesium, turbidity, etc.

5. Teaching assistant Fall, 1999 - Spring, 2000
Department of Civil and Environmental Engineering, University of
Pittsburgh, Pittsburgh PA
* Assisted in teaching courses: Environmental Process Engineering I & II, Environmental Process Chemistry, and Laboratory. Duties included experimental demonstration, safety education and grading.
* Collected teaching tools and software associated with energy-saving and green-building design for a new undergraduate course.

COURSE PROJECTS __________________________________________________________
* Summarized greenhouse gas emission policy, control technologies and the trend of emission credit trading.
* Redesigned the Rapid Mixing/Flocculation Basins for Fairfax County Water Authority Frederick P. Griffith, Jr. Water Treatment Plant Design Report. Provided design calculations and recommended major equipment.
* Modeled aerobic activated sludge reactors to determine kinetic and design parameters. Designed experimental set-up, conducted daily feeding and wasting, sludge testing and data analysis. Presented the results in departmental seminars.
* Reviewed GA 400 Extension Final Environmental Impact Assessment. Evaluated the report regarding impact predictions, assessments, alternatives, and mitigation methods.

MAJOR COURSE WORKS______________________________________________________
* Water and Wastewater Treatment Facility and Distribution System Design
* Water and Wastewater Treatment Unit Processes
* Environmental Engineering Process Laboratory
* Chemical-Physical Principle of Water Treatment
* Environmental Engineering Chemistry, Inorganic, Organic, Analytical Chemistry
* Environmental Biology and Microbiology
* Environmental Impact Assessment
* Air Pollution Control
* Environmental Monitoring

PUBLICATIONS AND PRESENTATIONS
* You, X. and Vidic, R.D. ¡* An Industrial Ecology Approach for Reducing Mercury in the Environment¡¨ 2001 Symposium on Sustainability, Clarkson University, Potsdam, NY, June 16-19, 2001
* You, X. and Vidic, R.D. ¡* Sulfur Impregnation of Activated Carbon through H2S Oxidation¡¨ 25th, Biennial Conference on Carbon, Lexington, KY, July 14-19, 2001

PROFESSIONAL SOCIETIES
* American Water Works Association (AWWA)
* American Society of Civil Engineers (ASCE)
* Engineering Graduate Student Organization (EGSO), University of Pittsburgh

COMPUTER SKILLS
* Programming languages: C++ and FORTRAN
* Software packages: Microsoft Word, Excel, PowerPoint, Sigma Plot, Lab View, Micromedia, Fireworks

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7851 to 7900 of 15497)Go to Search Parameters...
Brief Description
I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.
OBJECTIVE: To Obtain a Position as a Shovel Operator, Excavator Operator, Electrician, Dozer Operator, Foreman or in Safety Department
Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.
Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.
Junior Environmental Engineer
for a vacancy in your organization for Quantity Surveyor / Civil Engineer.
Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.
EH&S Manager with more than 12 years experience with chemical, radioactive and hazardous materials in manufacturing environment.
Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.
12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.
Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.
Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing
Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.
A highly motivated person willing to work my way forward. experienced and eager to learn, most of all I am willing to learn.
OBJECTIVE: A position as an Environmental, Health and Safety Manager.
I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.
I am working in Power Plant from last 12 Years as a Instrument and Control Technician.
High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.
Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.
12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.
MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages
To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.
Rover operator
At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .
Marine Maintenance Supervisor & Machinery Watchkeeper
Contracts Engineer, Cost Engineer, Quantity Surveyor
Resutls-Driven Structural Analysis Engineer
I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.
Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI
I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.
Combined experience in design and construction
Core Logging, Bore Hole Logging, Rock Identification, Reserve Estimation & Calculation, Liasioning With Govt.
HND Architecture, PGD Architecture, MBA
Security Manager. Coordinator. Instructor
Graduated in computer science subject
Experience in Engineering, Exploration and Environmental Geology. Advanced First aider, Defensive driving and Incident Manager. Well adapted to site safety with skills to implement site safety
Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship
Tangible experience in crushing, screening, HMS, dewatering, coke making and Gas cleaning. I am a holder of a brilliant BSc (Hons) Degree in Metallurgical Engineering. Being a good communicator, I am a very dynamic, self motivated and analytic team player who is result oriented.
A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment
CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant
Environmental geology on 2009.I am seeking for a volunteering job in geology immediately as i have enough free time.I
I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;
DIPLOMA IN MECHATRONICS Engineer
all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc
geophysical engineer
Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.
I have done my Diploma in Mechanical Engineering.I have experience is more than one domain in the Engineering,such as Production supervisor,Production Technician and drafter as well.
Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks
10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation
Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation
First   Prev   151   152   153   154   155   156   157   [ 158 ]   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com