Resume - Well Site Drilling/ field & HSE Engineer

Misco Jobs

Resume #24003

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Oil & Gas Development Company Ltd Pakistan.
* Well Site Drilling/ field & HSE Engineer
Oil & Gas Development Company Ltd.(OGDCL Rig N-3)
(Jan. 2004 - DATE)
* Well Site Drilling/ field Engineer / Night Company Man
Oil & Gas Development Company Ltd (Contractor Rig SPA-1I)
(AUG. 2003 - DEC 2004)
* Worked as Planning Engineer at Head Office
Oil & Gas Development Company Ltd
(Nov. 2002 – July 2003)
* Well Site Drilling/ field & HSE Engineer
Oil & Gas Development Company Ltd.(OGDCL Rig N-4)
(Jan. 2002 - July 2003)
* Well Site Drilling/field & HSE Engineer
Oil & Gas Development Company Ltd.(OGDCL Rig N-2)
(Jan 2000 -Dec 2001)

Service/field Engineer
Baker Hughes Inteq Islamabad.
(Feb 1998 – Dec 1999)

Sub Division Officer
Wapda Islamabad.
(Feb 1997 – Jan 1998)

POSITIONS CONTEXT
* Oil & Gas Development Company Ltd(OGDCL), one of the largest Oil & Gas E & P Company in Pakistan. I have been responsible for supervising all drilling operations at rig site, providing technical assistance and coordinating activities relating to drilling between the Rig site and head office& also performs the role of Night Company Man.
* Working on well rigs as an electromechanical engineer & Data Unit In-charge. Having a course on geology & rock mechanics, worked as Data unit in-charge. Inventory in charge of workshop in Islamabad office. Expense checking of the units. Statistical Data collection for the Company.

PRINCIPAL ACCOUNTABILITIES AND RESPONSIBILITIES
* Assist Company Man in all drilling activities at site, providing technical assistance as required and carries out duties of Night Company Man.
* Implementation & Supervision of Logging, Casing running, Cementation, P&A programs.
* Creation of Daily Drilling / Operations and Cost reports.
* Prepares daily Hydraulic reports, Kill sheets and analyzes data available to optimize drilling parameters. Selection of bits and hydraulic optimization also included in my job description.
* Maintains a continuous review of drilling equipment and methods used by Company to evaluate the present systems and to recommend modifications and improvements. Arrange phase wise drilling consumable materials for each well by correspondence with material section; inspect all the material received at site and issue inspection/clearance reports.
* To prepare comprehensive well end report and propose remedial measures for improvement on next wells.
* Worked in head office to collect off set well data & assist in planning the wells.
* Ensures relevant Government authorities are notified of critical activities.
* Ensures a safe working environment. Visit and audit the HSE Rig operations every two weeks.

PROFESSIONAL TRAINING'S / COURSES
During my jobs I have successfully completed the following courses at Oil & Gas Training Institute, OGTI, Islamabad & BHI Office (Pakistan);
Name Of Courses Duration Venue Instructors
Drilling Skills 01 weeksApril 2005 OGTI Richard S. CardenPetroskill Instructor
Well Engineering 01 weekFeb 2005 OGTI Robert WestermarkPetroskill Instructor
Advanced Well Control 02 weeksFeb 2005 OGTI Richard S. CardenPetroskill Instructor
Drilling Practices 02 weeksDec 2004 OGTI Richard S. CardenPetroskill Instructor
Practical Aspects Of Directional & Horizontal Drilling 02 weeksDec 2003 OGTI Prof S.S RehmanHOD Pet. NSW Australia
Practical Aspects Of Casing Design & Optimization 02 weeksDec 2003 OGTI Prof S.S RehmanHOD Pet. NSW Australia
Well Construction & Drilling Practices-Well Planning 05 DaysDec 2003 OGTI Prof S.S RehmanHOD Pet. NSW Australia
Well Completion & Work-over Operations 05 DaysDec 2003 OGTI Prof S.S RehmanHOD Pet. NSW Australia
Basic Concept Of Geology 02 weeksDec 1998 BHI Office ISD. HOD Geology Karachi University
Fire Prevention & Safety Officer Course for oil installation. 02 weeksJuly 2003 NIFTech ISD. Director Training NIFTech.
Introduction to Petroleum Industry 02 weeks OGTI Mr. Obaid ur Rehman Paracha
Introduction to Rig & its Components. 02 weeks OGTI Mr. Jamil Ashraf
Introduction to Drilling Operations 02 weeks OGTI Mr. Saif ullah Turk
Assistant Driller's Plant 02 weeks OGTI Mr. Mohammad Hussain
Drilling Operations 02 weeks OGTI Mr. Mohammad Hussain
Fishing Technology 02 weeks OGTI Mr. Mohammad Jamil
Basic Rig Crew Safety 02 weeks OGTI Mr. Mohammad Hussain
H2S Alive 01 weeks OGTI Mr Midhat Ali Jaffery
First Line Supervisor's BOP Course 02 weeks OGTI Mr. Mohammad Jamil
BHA Design 02 weeks OGTI Mr. Mohammad Hussain

EDUCATIONAL QUALIFICATIONS
B.Sc. in Electrical Engineering from the University of Engineering & Technology (Recognized by Pakistan Engineering Council), Mirpur, Azad Kashmir Pakistan). Obtained A grade in all four years. (1996)

H.S.S.C. in Pre-Engineering subjects from the Islamabad college for boys, Pakistan.

DISTINCTIONS
* Third position in University Examination.
* Won team award in Baker Hughes Inteq.
* Attended Courses on ISO – 9001 (International Quality Standards)

EXTRA CURRICULAR ACTIVITIES
* Writing short essays for College Magazine.
* Participation in speech competitions.
* Member of cricket & badminton teams in university

COMPUTER SKILLS
* Proficiency in DOS, MS Windows & Office, MS Word, Excel, MS-Power point.
* Proficiency in Drilling / Hydraulic soft-wares of different companies.

References:
Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8251 to 8300 of 15497)

Go to Search Parameters...

Brief Description

I am applying as chemical engineer

Diploma in Land Surveying and have vast experience in engineering, cadastral, topographical and mine survey. I have experince using Leica instruments such as GPS System 1200 and TCR407, TC1610 total stations.Currently working as a contract surveyor at the Unki Mine Project (Anglo Platinum)

I have Bachelor Degree in Electrical/Electronic Engineering From University of Benin, Nigeria. I Graduated with a Second Class upper division(4.49). I also have National Diploma in the same field. I have two years Experience in Repair, maintanance and servicing of industrial machine.

Sales & Marketing - Valve specialist

B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.

petroleum engineer, programming, Aries, fortran, acidizing

Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.

Experienced in design and testing of oil & gas equip. including casedhole well completion equip., surface and subsea wellhead & production equip. designed to API 6A and other industry standards, artificial lift systems coupled with exposure to oil country tubular product

Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.

Dedicated Land Professional with 29 years experience in a "Cradle to Grave" land department who works well under pressure and a deadline

reservoir engineering petroleum engineering reservoir modeling simulation production profiles

Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.

Mastery in the use of Synthetic & various kinds of water based muds which I have worked with and used in various projects for the last Seven years. Mastery in the use of Fluids Reporting and Engineering systems.

QAQC Co-Ordinator

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

Pressure Vessel Design Engineer

SAP MM professional with a total experience of over 11 years and SAP MM experience of over 2 years in implementation and support

Well Site Drilling/ field & HSE Engineer

Inventory Management, Cataloguing, SAP, Functional, Standardisation, BOM

Pre-commissioning/ commissioning, completions management on sveral Oil & Gas facilities globally

DATTARAM Scholarship for highest aggregate marks in Geology during three years graduation.

20+years wide variety of experience willing to work anywhere

Electro-mechanical overhead crane repairman

Skilled in Power Plant Operations and computer literate.

Estimating,Quantity Surveying, Project Planning & Project Management

crane &heavy equipment operator,mechanic,welder & service manager

Over 17 years experience in the Oil & Gas industry as Contract Administrator.

I have more than 11 years experience in Design, Selection and Engineering of Mechanical Equipment and Packages in Oil and Gas Industries (Onshore & Offshore).

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

I have 27 + years experience in Oil/Gas/Power Generation & as On Job Trainer

Technological Assessment and Management -environmental studies, transportation and energy production

My skills and qualification are very wide-ranging and diverse; this allows me a lot of latitude for skills transfer for both land based and marine orientated positions.

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I'm interesting for any Technician position , I have more than 14 year's experiences in all kind of electrical and electronic instruments Perform Preventive Maintenance and repair

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction and upstream sectors.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

A Petroleum Engineer with an MBA degree & about 8 years of experience with major E & P operators. Reservoir engg, reservoir modeling, prod surveillance, well completion & economic evaluation. A team player with excellent communication skills with strong focus on HSE.

Within my 8 years career, I have acquired Project Management and Contract Administration experience in the Oil Industry. I have developed my abilities at articulating and realizing project and contract management strategies from predefined or self-conceived objectives.

OIL AND GAS OFFSHORE OPERATION and PRODUCTION SUPERIVISOR/SUPERINTENDENT

Mechanical Engineer with 17 years Exp in Oil&gas/Refinary & power Sector as Sr .Manager with Triune Projects Pvt Ltd, New Delhi Key Skills: Project Management, Construction Supervision & Management, Testing & commission, Maintenance Management

I am goal-oriented, able to focus on the task with proven reliability to get the job done. As a graduate from Merdeka University of Malang, majoring in Mechanical Engineering, I pursue my career in Mechanical Engineering field or general Management.

11 years Administration/user level experience in the field of 3D Plant design Systems (PDMS/PDS) catering to the industry of petrochemicals, Refineries with strong piping background. Presently working with Fluor Daniel India Pvt Ltd, Delhi as PDS Coordinator.

Due to plant closing I am seeking new employment. I can disassemble and reassemble various types of mining equipment. Including gear cases, hydraulic components, and re-hose equipment.

Good experience in the operation of mining and quarry activities

i have over 17 years experience with diesel and hydraulics mechanical and automotive installation and trouble shooting i am looking for a position where my experience would reduce downtime and improve production

Excellent practical and theoretical environmental skills for a recent graduate. Demonstrated ability to collect and analyse a variety of ecological and environmental data. Computer software exp in statistics and GIS packages. Solid work history of prior employment displaying a commitment to work.

8 years of drilling engineering experience. Drilling and workover engineer, junior drilling supervisor, well site drilling engineer, bits optimisation engineer, HSEQ support Eng. Bits, stuck pipe & well control contracts manager and cost management project engineer.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

extensive experience in the field of pre-cast concrete products

Over thirty years milling experience, both operating and supervisory positions. Worked extensively with lead, zinc, and gold.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 [ 166 ] 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out