Resume - Looking for a mechanical working environment, with open atmosphere, welcome new ...

Misco Jobs

Resume #2403

CONTACT INFORMATION:
View contact information...

Objective:
To work in the research or product development environment in Mechanical Engineering.

Professional Experience

Design Engineer, 06/2001-March 2003
Schlumberger Technology Corporation
* Permanent, retrievable, hydraulic and mechanical set packers, bridge plugs design, with ProE and AutoCAD, and ISO qualification;
* Service setting tool, ISO test fixture with ProE and AutoCAD;
* Feasibility studies for high pressure high temperature packer, bigger tubing by pass, long distance multilateral seal connection;
* In-touch field failure service and consulting, with ANSYS finite element structural modeling and free body load analysis;
* Computational Fluid Analysis for sand mixed fluid impinging erosion problems with Fluent/Gambit;
* Software programming for Packer Operation safety Envelope calculation based on all possible failure modes, with Visual Basic 6.0. Database generation with MS Access for field product quote.
Graduate Research Assistant, Department of Industrial Engineering – Department of Mechanical Engineering, Florida State University, 01/2000-09/2000
On-Line Monitoring of Liquid Composite Molding
* Real time 2-D permeability calculation with computational fluid simulation for composite industry.
* Development of Control Volume computational fluid programming with C Language, using MSC/Patran FEM Analysis Software as preprocessing.
* Labview Data Acquisition System, Serial Ports Communication, DAQ and Signal Processing;
* Calibration of the pressure MEMS sensors system.
One Conference paper was published.
Graduate Research Assistant, Department of Mechanical Engineering,
Shanghai Jiao Tong University, China, 01/1997 ~ 05/1999
* Research on the online control of the low frequency oscillation of a compression system.
One Journal paper was published

Education:

Florida State University M.S in Mechanical Engineering(Fluid Mechanics) Sept 1999 ~ April 2001GPA 3.4/4.0
Shanghai Jiao Tong University(in China) M.S in Mechanical Engineering Sept 1996 ~ April 1999GPA 3.3/4.0
Hefei Institution of Technology (in China) B.S in Mechanical Engineering Sept 1992 ~ June 1996GPA 3.7/4.0

Skills

Experimental Numerical
¨ FEA structural modeling with ANSYS¨ Fluids simulation with Fluent/Gambit¨ Data Acquisition with Labview; ¨ Wind Tunnel Experiment; ¨ Conventional Heat-transfer Measurements; ¨ Finite Difference Methods; ¨ Finite Element Methods;¨ Scientific visualization
Computer Skill
Operating System: Unix, WindowsComputer Languages: VB 6.0, Fortran, C, C++, JAVA Application software (1): ANSYS;Fluent/Gambit;Labview;AutoCAD;ProE…;MSC/Patran; Application software (2):Mathematica; Matlab; Tecplot; Microsoft Office MS Access;

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8901 to 8950 of 15498)

Go to Search Parameters...

Brief Description

Petroleum and gas engineer.

Recent University of Texas Graduate. Economics/Business Degree.

Mechanical, Estimate/proposal engineer

Mechanical Engineer,Having exp.in Ship Building 4yrs Exp in Tribon M3 and Autocad

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Over 10 years of experience I have developed a good level of IT skills: I regularly use P3 (Primavera Project Planner), P5, P6 as well as Microsoft Office software.

I am self motivated person who is diligent, ambitious, adaptable, willing to learn and to take on new challenges.

Senior Pipe Stress Engineer

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

BE. MECH + CWI+BGAS PAINT. INSP. GR.2+ ISO 2000 lead auditor+ 10 const. & maint. in the field of oil & gas

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

Dear Sir: My experienced assignments cover a variety of projects including project management, translation and negotiating.

Nineteen years experience in mechanical and electrical work offshore Gulf of Mexico

B.com, C A (inter), D C A Having proficiency in the field of accounting and auditing for a period of more than 10 years .

A driven environmental major with positive outlook & expertise in business

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

I am a bilingual and experienced GIS professional looking for a challenging position with increasing responsibility that requires strong technical skills and proven leadership ability.

I am an environmentalist, Holding a MSc in Pollution and Environmental control, with an MSc in Disaster management, BSc. in Environmental Science and Diploma in Computer science. I have an experience of 7 years working with Non-governmental organizations.

Project Information Manager/ Intergraph PDS Administrator & Support

Ø Seeking a challenging position to utilize my education and experience in the field of Pipeline engineering profession. Ø To work in challenging environment and contribute the growth of the organization, to work professionally, honestly and for the prosperity of organization.

Have a lot of experience if field operation specifically with coiled tubing.

Ten years of production experience, maintenance, quality control, and provisory experience in cement production and management experience in lime production and quarry operations. Directly worked with maintenance repair for the plant. Degree Geologist

Mater and Doctoral degree holder in environmental science, Have 3 1/2 years of teaching experience. Worked in various environmental projects, authored a manual titled "A laboratory manual for water and wastewater analysis. Specialized in air and water pollution, EIA, Toxicology, EMS, Energy.

EXPERIENCE IN INTERNATIONAL TENDERING OF POWER TRANSMISSION PROJECTS

Summary of Relevant Experience: Management career is based on sixteen (16) years experience developed while in long term service with world class engineering and construction organizations.

OBJECTIVE To obtain a position with a progressive construction / development firm in which I will utilize my construction management and business skills

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

Environmental Assessment and Management

Prepared weekly and monthly schedules and cost reports preparation and submission to Client and in house management• Monitored of the cost & Progress on weekly basis. Invoiced to Client on monthly basis for the project.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

A keen team player with more than 15 years experience in Project Document Management, solid background in IT support, accounts, project administration, Project co-ordinator, quality control co-ordination and project analysis. Expert in Documentum.

10 years working experience in the field of QA/QC Inspection, Project Management, Field Engineering, Construction, Fabrication, Maintenance and Preservation of High-rise Buildings, Paper Recycling Plant, Oil & Gas Petrochemical Plant to Semiconductor/Wafer Technology Plant.

Production Operations Chief in an international oil company with strong experience in artificial lift equipment design and diagnostic, workover rig supervision, production follow-up, costs and investment control, as well as field crews supervision.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Over 10 years of environmental experience with same company! I can provide the following; • Phase I and Phase II Site Assessments • Asbestos inspections • Groundwater studies • Environmental assessment worksheets • Mineral analysis • Hazardous waste compliance audits

Over six years(8) years experience in ammonia plant and field of Oil & Gas Production Operation, PetroChina International Jabung Ltd. Responsible for the day to day planning and safe execution of routine planned to ensure safe and efficient, Bring On Line and Shut In Production, start-up and shutdow

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

License and experience geologist in the fields of mining and urban geology

Mining Engineer with 6 year 0f experience in mining industry

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

40 years practical and managerial experience in the gas,oil petrochemical and water sectors.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 [ 179 ] 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out