Resume - 12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND U...

Misco Jobs

Resume #2410

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Date of Birth: 28th April 1970
Driving license: UAE valid till July 2011
Martial status: Married

Educational Qualifications
Graduate Degree (B.E.) in Civil Engineering – Passed in 1991 with First Class from India.
A+ Modeler Certification from Current Methods on Water Distribution Systems.

Computer Awareness
SAND (Structural Analysis & Design), STAAD.Pro 2002, WaterCAD (Hydraulic Analysis), PIPECALC,
MS Project, Word and Excel.

Professional Experience
12 years as Civil/Structural Engineer in the Oil, Gas, Power, and Water Sector.

Thorough knowledge in the preparation of Structural Calculations (Concrete and Steel), General Arrangement drawings, Detailed Reinforcement drawings, Site Layouts, Architectural drawings, and Drainage and Water supply drawings.

Done the design and drawings of following Projects/Structures/Structural elements:- Power Stations, SVC Plants, Sub Stations, Control Buildings, Desalination plants, Water Reservoirs (3.0 – 10.0 MIG), Generator Stations, TXR Bays, Oil Storage Tank Farms and their Foundations, Post Tensioned Concrete Bridge (600M long), Pedestrian Bridge (100M long), Health Club, Commercial Buildings, Pipe Racks, Pipe Supports, Flour Mills, Silos, Sea Water Pump Houses and Water Supply and Distribution Pipe Lines

Done Finite Element Analysis of Rafts, 3D, Wind, Seismic, and Temperature Analysis for various Steel and Concrete Structures, Crack Width calculations, 'U' Value calculations, Road and Culvert Design to SLW60 Wheel Loads, Pile and Pilecap Designs, and Hydraulic Analysis of Water Distribution and Transmission Pipe lines.

Experienced in using the following codes:- BS 8110 Part I, II AND III, BS 8007, BS 8004, BS 6399 Part I and II, BS 5628, BS 5950, UBC 1997, Road Note 29, CIRIA Guide, AISC, AISC LRFD,etc.

* Independently executed several projects as Civil/Structural Engineer responsible for all Deliverables, Cost, Schedule and Execution of the Project involving a team of Architects, Engineers, Designers, Draftspersons and Site Supervisors.

* Prepare Man-Hour Estimates, List of Deliverables and Schedule.

* Prepare Design Basis, Scope of Work, Specifications, Bill of Quantities, Cost Estimates and Other Tender Documents.

* Preparation of Architectural, Structural, Drainage and Water Supply Drawings

* Carryout Structural Analysis and Design (Including Earth Quake and Wind analysis) using the latest Industry Software.

* Techno-Commercial Evaluation of Tenders and Assist the Client during Contract Award.

* Review of Shop Drawings, Structural Calculations, Pile Designs, Form Work Calculations, Soil Investigation Reports and Material Submittals by Contractors.

* Coordinate with Municipality, Town Planning Department and other Consultants and obtain Plot approvals, Service Reservation Approvals and Building Permits.

* Hydraulic Analysis of Water Transmission and Distribution Lines using WaterCAD or Cybernet.

* Ensure compliance to QA Procedures for project activities and participate in ISO 9001 QA audits and internal company audits.

Feb. 2002 to date DERBY DESIGN CONSULTING ENG, Abu Dhabi.
Senior Civil / Structural Engineer

* Shuweihat Combined Cycle Power Plant for Emirates CMS Power Company. (Project cost US$. 800M )

* Replacement of Electrical Power Skids for Water Injection Clusters at Bu Hasa for ADCO.

* Mess Hall and Leisure Centre at Bu Hasa for Gasco.

* Static Voltage Compensator (SVC) Plant at Mussafah, Abu Dhabi for ADWEA.

* Generator Halls and Switchgear Buildings for Presidential Palaces.

* Construction of additional Reservoirs at UNIT I, II and III for ADWEA.

* 132kV Sub Station E18 at Abu Dhabi for ADWEA.

Jan. 2000 to Feb. 2002 PENSPEN INTERNATIONAL (PENCOL), ABU DHABI
Civil / Structural Engineer

* One Fire Water Tank, Four Crude Oil Tanks and Related Structures for QP, at QATAR. Platforms, pipe supports, culverts and external works.

* 4.0Km Long concrete Pipe Rack and Pipe Bridges at Ras Laffan for QP.

* Das Tower Long Term Repair Works for ADMA-OPCO at Das Island. Structural Analysis and Design of existing Das Tower building to check the structural integrity.

* Full Surface Fire Fighting Facilities For COS Tanks for ADMA-OPCO at Das Island.

* Asab IP Transfer Line Reinstatement and IA Line Replacement for GASCO.

* Shuweihat Water Transmission Scheme for ADWEA. ( Project Cost US$ 750M.)
The scope of the project include 10MG RCC Reservoirs (6 Nos.), 140m x 40m Pumping Station,
Site Development, External Works and 1200mm and 900mm dia. downstream pipework to Mussafah and Al Wathba.

* Water Transmission and Distribution Projects for ADWEA/ADDC/TRANSCO.
1200mm dia. Transmission lines to 150mm dia. Distribution lines outside Abu Dhabi Island.

Dec. 1993 to Jan 2000 DERBY DESIGN CONSULTING ENG, Abu Dhabi.
Civil / Structural Engineer

Power Projects

* Administration Building (G+2) - Taweelah A2 Power And Water Project For Emirates CMS Power Company.
* 400 kV Substation, Control Building, Transformer Bays and Reactor Building at Mussafah Grid Station, Abudhabi for ADWEA.

* 220/33 kV Substation at Al Oha and Al Salamat for ADWEA.

* 132/11kV Substation at Madinat Khalifa for WED.

* 132/11kV Substation W17 (B+G+4) at Abu Dhabi for ADWEA.

* 132/11 kV Substation W1 (B+G+4) for ADWEA.

* 5 Nos. 33/11kV Substations at Mussafah & Mina for W.E.D - E12, P5, ME12, MW5 & M34.

* Artificial Islands in sea for 400 kV Overhead Line Towers from Taweelah to Abudhabi.

Desalination Plants
* 2 Nos. x 3.5 Million Gallon per day MEV-TVC Unit 9 and Unit 10 Desalination Plants at Umm Al Nar for ADWEA.

* Relocation of One Million Gallon Per Day Reverse Osmosis Desalination Plant from Mirfa to Sila for WED.

Oil And Gas
* Foundations for Oil Storage and Fire Water Tanks of various sizes ranging from 24m to 40m dia. and 10m height, at Multi Product Storage and Distribution Depot. for ADNOC FOD.

* Design of temporary supports for ADNOC - concrete repair works.

* 132kV Substation at Bab and Asab for ADCO.

Bridges
* Preparation of detailed drawings for Post Tensioned Concrete Bridge (600m Long) at IP-69 for Abu Dhabi Public Works Dept.

* Pedestrain Bridge (100m Long) at Fifth Floor Level Between New and Old Etisalat Buildings in Abudhabi.

Commercial Buildings
* Administration Building (G+3), Accommodation Blocks (G+3), Workshops etc. for Abudhabi Ship Building.

* Health Club, Fish Restaurant, Plant Rooms, Changing Rooms, Pool Bar etc. for Sheraton Hotel, Abu Dhabi.

Other Industrial Structures
* Hawk Hangar for Directorate of Military Works.

* New Packing Building (G+5) for Abu Dhabi Flour Mills.

* Telecom Building (B+G+4) at Musallah for Etisalat, Abu Dhabi.

* Sea Water Pump House & Related works at Sila for WED.

* Underground Tunnels and Technical Building, Grand Mosque, Abu Dhabi.

July 1992 to Nov. 1993 KHANSAHEB CIVIL ENG. DUBAI
Structural Engineer

Chicago Beach Resort Development - Dubai.

* Conference & Banqueting Centre
* Sports Centre
* Underground Car Park
* Underground Tunnels And Services Building

June 1991 to July 1992 ROOP REKHA ARCHITECTS & ENGINEERS, INDIA
Structural Engineer

Detailed Design of Multi-Storied Buildings, Preparation of detailed drawings and Preparation of
Specifications and BOQ.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 15497)

Go to Search Parameters...

Brief Description

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

OBJECTIVE: To Obtain a Position as a Shovel Operator, Excavator Operator, Electrician, Dozer Operator, Foreman or in Safety Department

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

Junior Environmental Engineer

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

EH&S Manager with more than 12 years experience with chemical, radioactive and hazardous materials in manufacturing environment.

Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

A highly motivated person willing to work my way forward. experienced and eager to learn, most of all I am willing to learn.

OBJECTIVE: A position as an Environmental, Health and Safety Manager.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

Combined experience in design and construction

Core Logging, Bore Hole Logging, Rock Identification, Reserve Estimation & Calculation, Liasioning With Govt.

HND Architecture, PGD Architecture, MBA

Security Manager. Coordinator. Instructor

Graduated in computer science subject

Experience in Engineering, Exploration and Environmental Geology. Advanced First aider, Defensive driving and Incident Manager. Well adapted to site safety with skills to implement site safety

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

Tangible experience in crushing, screening, HMS, dewatering, coke making and Gas cleaning. I am a holder of a brilliant BSc (Hons) Degree in Metallurgical Engineering. Being a good communicator, I am a very dynamic, self motivated and analytic team player who is result oriented.

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

Environmental geology on 2009.I am seeking for a volunteering job in geology immediately as i have enough free time.I

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

DIPLOMA IN MECHATRONICS Engineer

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

I have done my Diploma in Mechanical Engineering.I have experience is more than one domain in the Engineering,such as Production supervisor,Production Technician and drafter as well.

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out