Resume - B. Tech (Electrical) with more than 15 years experience in project management, d...

Misco Jobs

Resume #24763

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
* Worked with both Utility and Consultancy Firm and thus have better understanding about requirements of both sides.
* I have experienced in almost every aspect of electrical power generation/distribution and control systems(not power plant instrumentation) i.e. from planning, preparation of tender documents, design & engineering, selection of contractors, Contractor's document review, factory tests witnessing, site supervision, expert engineer during warranty period etc.
* During my time in Malaysia, I have developed the ability to deal with different cultures and conflicting situations, within a demanding work environment.
* Have working knowledge of mechanical and instrumentation & control systems in a typical combined cycle power plants and substations.
* Have good exposure to FIDIC and other Contractual documents.
* Good working knowledge of IEC/BS Standards.
* Proficiency in PC handling e.g. MS Word, MS Excel, MS Access, MS Project and working knowledge of Auto Cad.
* Working experience in System Study software (DAPPER, CAPTOR, Motor Starting Analysis) of SKM System Analysis Inc, USA.
* Exposure to other software packages e.g. PowerStation, Cymgrid, Calculux etc.

MEMBERSHIP
* Associate Member, Institution of Engineers (India)
* Member, Institution of Engineers (India)
* Charted Engineer, Institution of Engineers (India)

PAPER PUBLISHED
* Design Requirements of Remote Terminal Units, BHEL Conference, New Delhi 1995
* Evaluation of IEC 870-5-101 Protocol and Its Relevance in Indian Power System – CIGRE, Delhi Chapter, 1996.

TRAINING UNDERGONE
* Design, engineering, installation, commissioning, operation and maintenance of thermal power plants, substations and transmission lines – One year course at Power Training Institute, Badarpur, Delhi
* Power System Protection – One month course at PSTI, Bangalore, India
* Design and Engineering of SCADA/EMS system – 8 days course at CMC, Hyderabad, India
* Graphical User Interface – four days course at STG, New Delhi
* Software Testing – two days course at
* Oracle 7.0 – 2 weeks course at
* Attended several seminars/presentation by major protection relay & SCS/SCADA/EMS suppliers both in Malaysia and India

OBJECTIVE:
Project Manager/ Senior Engineer position with overall responsibility for electrical/project management works

WORK EXPERIENCE:
"January 1998 – To date": MINCONSULT SDN BHD, KUALA LUMPUR, MALAYSIA

Projects
1. Tenaga Nasional Berhad (TNB) Engineering and Financial Audit 2004– Project status ongoing, will be completed by July 2005 (Minconsult in Consortium with Price Water House (PwCAS) Malaysia and Australian Power and Water Australia)

Group Leader (Transmission)/Overall Electrical Coordinator for Generation and Distribution position, with responsibility as Auditor:

* Preparation of proposal for bidding for Audit work.
* Preparation of detailed audit plan
* Identification of key tasks and information requirement
* Preparation of questionnaire to be used during meetings
* Preparation of report format and population of report content
* Review and analysis of information received from TNB
* Coordination with other consortium partners especially providing engineering inputs to PwCAS for their part of audit
* Preparation of presentations about findings to TNB officials

2. Teluk Salut 190 MW Combined Cycle Conversion Project incl. extension of 132 kV bays in existing switchyard, Karambunai, Sabah, Malyasia. – Project status ongoing, project revived after two year

Project Manager/Lead Electrical Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work.
* Preparation of detailed technical specification, for electrical and control systems in steam cycle plant and extension work in 132 kV switchyard.
* Preparation and participation in Power Purchase Agreement (PPA) between the Owner and Distribution Company (SESB)
* Bid evaluation for main contractor selection process and recommendation to the Owner.
* Negotiation with Selected Contractor for optimisation of delivery schedule and price in order to achieve optimisation for the Owner.
* Review of Contractor's proposal for Basic engineering.

3. University Putra Malaysia (UPM) – Digital Power Line Communication (DPLC) Project – Project status ongoing

Lead Engineer position with responsibility as Service Provider's Engineer. Main responsibility included:

* Carrying out study and suitability of existing switchgears, under ground power cables, over head lines etc. for installation of DPLC equipment.
* Site supervision of equipment installation and commissioning incl. Network Management System.
* Preparation of reports for submission to Authority for approval of license.

4. KL Sentral, 32 Story Condominium, Kula Lumpur, Malaysia comprising 11/0.415 kV substation and 415 V distribution – Project status ongoing

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for sizing of equipments.
* Selection of contractors for electrical and control(BMS) equipments incl. overall coordination responsibility for installation and commissioning.

5. Asian Institute of Science, Medicine, and Technology, Kedah, Malaysia comprising 33/11 kV substation, several 11/0.415 kV substations and 415 V distribution – Project status ongoing

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for complete power distribution system.
* Selection of contractors for electrical and control(BMS) equipments incl. overall coordination responsibility for installation and commissioning.

6. 3 x 700 MW Coal Fired Power Station, Tanjung Bin, Malaysia – Project status ongoing

Lead Engineer position with responsibility as Design Engineer to Contractor. Main responsibility included:

* Earthing grid design for power block area.

7. 110 MW Bukit Panggal Combined Cycle Power Plant, Tutong, Brunei Darussalam – Project status ongoing

Deputy Project Manager/ Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:
* Preparation of proposal for bidding for Consultancy work.
* Preparation of technical/economic proposal for the Owner to get clearance from the Department of Power, Government of Brunei.
* Preparation of tender documents for Electrical and control systems for combined cycle power plant and 66 kV switchyard.
* Evaluation of bid proposals (both technical and contractual/commercial) and preparation of evaluation report for the Owner's decision.
* Negotiations with selected bidder for electrical, control, general and commercial matters

8. 30 MW Thermal Solid Waste Power Plant incl. 33 kV substation, Kampong Baroga (earlier Bahol), Malaysia – Project status ongoing

Senior Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work.
* Preparation of Functional Technical Specification for the Owner, regarding Electrical Systems for 2 nos. Steam Turbine Power Plant and 33/11 kV substation.
* Review of Contractor's basic engineering documents

9. 650 MW Combined Cycle Power Plant, Perlis, Malaysia – Project completed

Lead Engineer position with responsibility as Design Engineer to Contractor. Main responsibility included:

* Design and engineering of small power and lighting system including lightning protection throughout plant area.
* Earthing grid design for power plant area.

10. 750 MW Tuanku Jaffar Combined Cycle Power Plant, Port Dickson, Malaysia – Electrical works related to Balance of Plant only – Project almost completed.

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work, under main Consultant appointed by TNB.
* Preparation of technical proposal and Detailed Project Report.
* Preparation of detailed technical specification, as applicable.
* Review and approval of Main EPC Contractor's proposal regarding Electrical SLDs, circuit/protection diagrams, earthing grid design, small power, lighting, lightning protection, various equipment sizing for power plant and distribution systems incl. generator transformers, unit/station transformers, distribution transformers, protection systems etc.

11. 225 MW (2 blocks of Frame 6 machines) Combined Cycle Power Plant, KHTP IPU Project, North Malaysia incl. 4 nos. 132/33/11 kV substations both outdoor and indoor (gas insulated) – Project completed

Senior Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for power station and 132/33/11/0.415 kV power distribution network.
* Preparation of Functional Technical Specification for the Owner, regarding Electrical Systems for Combined Cycle Power Plants (2:2:1 configuration), 132/33/11kV Gas Insulated Substation, 132 kV conventional outdoor switchyard, 33/11 kV substation and several 11/0.433 kV substations.
* Review and approval of Main EPC Contractor's proposal of electrical SLDs, circuit/protection diagrams, earthing grid design, small power, lighting, lightning protection, various equipment sizing for power plant and distribution systems incl. generator, generator transformers, unit/station transformers, distribution transformers, 132/33/11 kV switchgears, 132/33/11 kV power cabling, protection system, substation control system (SCS), 3-level SCADA system, Building Management System (BMS) etc.
* Site supervision of testing and commissioning of electrical equipments at power plant and substations, as and when required.
* Preparation of functional specification for Automatic Meter Reading (AMR), Billing System, Trouble Call System (TCS) for power plant and distributed customers, selection of suitable contractor and implementation at site.
* Preparation of functional specification for Management Information System (MIS) for the Owner providing required information from the power plant/distribution system, selection of suitable contractor and implementation at site.
* Preparation of master plan for 415/240 V distribution system within KHTP Park for loads including housing complex, commercial customers, and industrial customers.
* Engineering for installation of new protection schemes, SCS, remote metering facilities in existing 33/11 kV switchgears of 4 different makes.
* Verification of As-built drawings at site.
* Owner's specialist engineer during 24 months defect liability period for power plant and distribution system equipment/systems especially for contractual matters.
* Evaluation of bid proposals (both technical and contractual/commercial) and preparation of evaluation report for the Owner's decision.

12. 330 MW (1 block of Frame 9 machines) Gelugor Upgrading Project for Tenaga Nasional Berhad(TNB) incl. 1 no. 132/33 kV gas insulated substation – Project completed

Engineer position with responsibility as design engineer for the main engineering, procurement and construction (EPC) contractor. Main responsibility included:

* Preparation of bid proposal for Consultancy work.
* Preparation of technical proposal for the EPC contractor for bidding the job.
* Preparation of detail technical specifications for getting quotation from several sub contractors for electrical and control systems.
* Review and analysis of sub-contractor's proposal and approval of documents for selection of equipment.

13. 120 MW, (4 Frame 5 gas turbines) Open Cycle Power Plant, Karambunai, Sabah Malaysia – Balance of Plant only (11/132 kV generator transformer, 11/0.415 kV unit and station transformers, 125 V DC system, 240 V UPS, Lightning Protection, Electrical building services etc.) – Project completed

Engineer position with responsibility as design engineer for the main engineering, procurement and construction (EPC) contractor. Main responsibility included:

* Preparation of technical proposals for getting quotation from several sub contractors for electrical and control systems for Balance of Plant items.
* Review and analysis of sub-contractor's proposal.
* Preparation of basic engineering and detail engineering documents/drawings for client's approval.
* Carrying out earth grid calculation, short circuit calculation and protection coordination studies.
* Preparation of final as-built drawings.

"August 1991- January 1998": POWER GRID CORPORATION OF INDIA LTD., INDIA

1. Supervisory Control and Data Acquisition / Energy Management System (SCADA/EMS) Project for Southern and Northern region (power sector wise) of comprising of 3 level hierarchical control and up to 500 Remote Terminal Units (RTU).

Deputy Manager / Senior Engineer positions with responsibility as in house Engineer. Main responsibility included:

* Preparation of Feasibility Report (FR) for the Projects in order to get clearances from Government Authorities and State Electricity Boards.
* Preparation of detailed project report.
* Presentation to several state electricity boards about salient technical features, advantage of SCADA/EMS system in order to get their agreement on the Project including sharing of cost.
* Preparation of bid documents for selection of Main Consultants.
* Bid evaluation for Consultant selection process and recommendation to Company's board and to World Bank for approval.
* Review and analysis of functional technical specification prepared by main consultants especially related to RTUs and control room hardware/software requirements.
* Preparation of bid documents, for selection of the main Contractor.
* Bid evaluation for main Consultant selection process and recommendation to Company's board and to World Bank for approval.
* Preparation of functional technical specification for Distribution Automation System (DAS) for DVB (earlier DESU)
* Preparation of feasibility report for implementation of distribution SCADA system in Pondichery.

2. 400 kV Substation at Gooty, Andhra Pradesh, India.
Engineer position with responsibility as an O&M engineer. Main responsibility included:

* Operation and Maintenance of Electrical equipments in 400 kV Substation.
"August 1989- August 1991": National Thermal Power Corporation, INDIA

Engineer position with responsibility as an O&M and Erection Engineer. Main responsibility included:

1. 400 kV Substation at Gooty, Andhra Predesh, India.
* Operation and Maintenance of Electrical equipments in 400 kV Substation.
* Site supervision of testing and commissioning of Relay Protection, control, switchyard equipments i.e. power transformer, shunt reactors, circuit breakers etc.

2. Central Training Institute, 720 MW Badarpur Thermal Power Plant, Delhi
Engineer Executive Trainee/Assistant Engineer position. Main responsibility included:

* Successfully completed (1) one year training course in planning, design, installation, operation and maintenance of electrical systems in thermal power plants and transmission substations incl. (1) one month special course in power system protection at Power System Training Institute, Bangalore, India.
Please detail your work history including past employers, employment dates, position held, responsibilities, and major achievements.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5601 to 5650 of 15494)

Go to Search Parameters...

Brief Description

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

Well Planning, Log Interpretation, Geosteering of horizontal - deviatedated - vertical wells. Excellent userof IT Application Software.

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Willing and able to perform ones job with less supervision

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Well Testing with Data Aqusition Supervisor with 10 years experience in Schlumberger and MB petroleum compaqny.

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

Extensive experience in the Electric Sumbersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

16 years in Oil & Gas Offshore/Onshore production cum Process operations

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Fourteen years experience as a Material Specialist in Oil & Gas Field Drilling Company at Libya, G.S.P.L.A.J. Work includes co-ordination and administration of all the activities and operations of the warehousing area for the supports and services of the company’s drilling, oil handling, engineering

Professional Engineer, Degree (AMIE Mechanical), with (14 years of International and domestic experience) in operations of large thermal, gas and combined cycle power plant in India, Dubai and Sudan

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

15 years experience in the Machinist trade on both CNC and manual machine tools.

i m very hardworker

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

COURSE IN HUMAN RESOURCES AND INDUSTRIAL

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

Six years of experience working for various companies in Human Resources practice!

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

DCS Operator for Fractination/Distillation of Fatty Acid,Distillation of Glycerin,Pretreatment of Oil,Splitting Column,Pretreatment of Glicerin Water,Boiler,Steam Turbine,Oil Thermal Heater,Hydrogen Production by Steam Reformer and Methanol Reformer

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

ENVIRONMENT ENGINEER

Oil & Gas Accountant with 14 years of A/P, general ledger, JIB, joint venture and sales tax audit response, and revenue experience on OGSYS accounting system.

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 [ 113 ] 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out