Resume - Chief Engineer (Manager) in Technical Office for a large construction progect :H...

Misco Jobs

Resume #26149

CONTACT INFORMATION:
View contact information...

Designation: Technical Office Manager of construction project

EDUCATION
May 1989 Complete the preliminary year towards the M.Sc. Degree in Structural Engineering, Cairo University.
June 1987 Bachelor of Science in Civil Engineering.
Cairo University, Giza, Egypt.
Grade: Very Good with Honor Degree (80.7%).
Grade Point Average (Major) - 3.2 / 4.
Grade Point Average (Cumulative) - 3.0 / 4.
Graduation Project: Concrete Design with a V.Good rate of Appreciation.

WORK EXPERIENCE

SAUDI BENLADEN GROUP,
Rush Projects Department- Cairo
Oct. 2004 - Up to date
Chief Engineer in Technical Office for the project of Development Of King Abdul Aziz Endowment For Mecca Holy Haram Project. The project with an Estimated Value of 1.5 billion $ and Considered as the Highest Concrete Residential and Commercial Complex in the world. It has 1,400,000 m2 Gross Built Area with a Total Height of 477 m from Ground Level. It is Consists Podium with 16 levels with area of 35,000 m2/ level and 7 Towers above Podium with 560,000 m2 Floor Area. Also there is the A/C Plant building for the complex and for the future extension of Haram. The Consultant is Dar Al-Handassah.
Responsible to follow up, check and review work for three teams (5 Engineers each) for two Towers and the A/C Plant building. The main job responsibilities are as the following:
- Preparing and checking structural shop drawings with B.B.S.
- Reviewing and coordination for other shop drawing aspects (Electromechanical & Architecture shop dwgs).
- Preparing proposals and RFI's to facilitate construction.
- Planning for submittals of shop drawings, taking into account site priorities.
- Follow up for shop drawings production rates, and provide solutions to improve quality.

KUWAITY TECH CONSULTANTS - KUWAIT
July 2003 - Oct. 2003
Senior structural design Engineer Participated in the design and following projects according to ACI code:
- Al-Zour Power Generation Station - Al-Zour-Kuwait
Structural detailed design for buildings and shop drawings for all buildings
- General Health Building - Kuwait

ASCON /ETA - NABCONTRACT - ECTTP J.V. - CAIRO
July 2002 - May 2003
A Technical Office Manager for Construction project of Tunnel under Cairo Ring Road at ElKattamia (25 million L.E). The project was made to serve the Maadi City center Commercial Mall and Carfour Hyper Market the project consist of the following:
- Construction of tunnel of R.C walls and foundations and steel beams roof girders with R.C slab Decking with open cut method having temporary detour for traffic diversion of ring road.
- Permanent Utilities diversion for 400 mm D.I water pipe with valve rooms, also 600mm sewage pipe with manhole with depth of 12 m under road both are crossing under road through R.C sleeve of 1700mm pipe also electrical cables were diverted using thrust boring.
- Construction of Roads for mall and its approaches having electrical illumination, storm water drainage, side walks and Embankment tiling, signage and road marking and also all necessary landscaping items.
Responsible for the following:
- Reviewing and preparing of the shop drawings for different Aspects of items.
- Following up of the time schedule, making daily and weekly report for works to the consultant.
- Making submittal for materials and documents to get consultant Approval.
- Preparing and updating for Quality and Environmental plan, Quality Assurance, Quality Control, and Health & Safety Manuals for ISO 9000 - 2000 certificate.
- Preparing subcontractors Contracts and Invoices.
- Preparing of Claims and variation orders study.
- Preparing monthly valuation for the executed works.

SIGMA for Engineering and Construction - CAIRO
Aug. 1995 - June 2002
A Projects Manager of contracting company specialized in supplying and installing of sewage or water main pipe networks, giving the technical support for the projects construction, planning for site, follow up of Execution and studying tenders.

CAMPENON BERNARD - SGE - CAIRO
Nov. 1993 - June 1995
Senior Technical Engineer for the project: GREATER CAIRO METRO LINE 2 - Joint Venture for Civil Works (JVCW) - Design Department, Making full reinforcement calculations preparing and Reviewing of Shop drawings and B.B.S, and follow up for Execution for the following main structures:
- Under Ground Stations of ELKHALAFAWI and ST. THERESA (21.0 width x 155.0m Long x 22.0m depth),
- Annexed Structures (utility under ground shafts along the Tunnel varying from 4.0-5.0m in width and from 10.0 - 22.0m in length and 22.0 - 30.0m in depth).
- Connection Structures between Annexed Structures and Tunnel, taking effect of sequence of construction and earth pressure loads, Uplift loads and tunnel forces due to removing of tunnel segments.

ARAB CONSULTING ENGINEERS - CAIRO
(MOHARRAM - BAKHOUM)
July 1989- Oct. 1993
Structural Design Engineer participated in the design for the following projects:
- Homoud Tower in Kuwait:
- Extension of the Arab Consulting Engineers Headquarters, Dokki, Cairo:
Analyses and design of paneled frames in space under vertical, wind, seismic (UBC zone 2B), and temperature loads were made. Frames consist of five stories flying over the existing five-story structure. Frames supported on micro-piles foundations.
- Extension of King Abd El Aziz University, Jeddah.
- Safir Hotel extension, Giza.
- Greater Cairo Metro Line No. (2) - Basic design stage:
Joint Venture SOFRETU-EHAF-ACE, Analysis and design of different elements for the under ground stations (Rod ElFarag, Masarra, and Al Awkaf stations).
- Omar Afandi Multi-Story stores at Nasr City, Assiut and Quesna.
- Tourist Village on the North West Coast of Egypt (Reviera):
- Egyptian German Telecommunication Industry (E.G.T.I.) in 6th of October City.
- Beni Suef Cement Project:
Reviewing and checking of calculations and reinforcement work shop details of contractor KOBI STEEL Ltd, Japan, according to DIN code.
- El Shaheed Abdel Moneim Riad Tunnel at Alexandria:
Complete analysis and design of Skew Prestressed Concrete Roof Slab was made. Finite Elements analysis using shell element, and approximate grillage analysis was used, to discuss the distribution of moments due to transverse loads and due to prestressing forces, also the distribution of the In-plane forces, during phases of construction. This slab type is considered as the first of its kind in the country with 27.0 m edge span and 0.9m in thickness.

SPECIAL SKILLS
Computer skills:
- Excellent knowledge in using SAP2000, and Windows, Excel, Word and AUTOCAD.
- Made some programs to design and check of sections according to various codes with BASIC and FORTRAN computer languages.
Languages
- Arabic (Mother-tongue). - English (Fluent).

REFERENCES Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9151 to 9200 of 15320)

Go to Search Parameters...

Brief Description

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

Production with safety

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Urban Roads and Highway design, Traffic and Transportation planning

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mine Planning Superintendent

Mechanical, Automotive, Project, Calibration, Engineering, Production

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

Doctorate in Science, Ecotoxicology, marine pollution, Enzymes, Biomarker, biomonitoring of pollution,

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

multi skilled engineer

Professional Geoscientist with 7 years international field experience in mineral exploration. Setup, hiring, training of field teams of local geologists. Archean lode Au, umf-hosted Ni-sulfide, porphyry Au-Cu and gemstones. Dutch Guyana, Madagascar, Tajikistan, Uganda, Mongolia, Canada, Mexico.

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally.

A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions.

Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries.

Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques.

Metreculation, pree degree, diploma in fire and safety and OASHA

Rigger at mine construction uderground rigger,structural erection steel fabrication,demolist and asembly. 3G licence welder, scafolder.

Fresh graduate QS looking for job

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

I have 25.5 years experience as a professional fitter/welder with 4 years as a certified welding inspector performing visual inspection of welds on pressure vessels, piping, storage tanks and structural components.

U.S Navy Aviation Gas Turbine Jet Mechanic

-A team player, flexibile, detail-oriented, and self-motivated

Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .

Acquisition and title research

7 YEARS OF RIGGER EXPERIENCE

Mechanical techanician diploma

Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 [ 184 ] 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out