Resume - 20+ years in drilling and completions including under balanced side trac re-entr...

Misco Jobs

Resume #26289

CONTACT INFORMATION:
View contact information...

RE: Drilling Superintendent/Supervisor

Please find my resume attached for your review. I would be very interested in the opportunity of employment through your company.

My personal and professional focus is on results that are achieved by not only meeting, but exceeding performance expectations. I have over 26 years of experience in the oil and gas industry, including off-shore HP/HT critical 62% H2S operations in Greece, arctic operations in Russia, and desert operations in Saudi Arabia, Algeria, and Libya. I am well acquainted with international employment, and working well with different nationalities is one of my strongest suits. I enjoy the challenge and responsibility of starting new projects and ensuring the job is completed in a safe and cost-effective manner.

I am confident that I can meet the professional requirements of the above position and I look forward to your response.

EDUCATION
On-going Attending seminars on horizontal, under balanced drilling,
LWD/ MWD, casing drilling procedures.
Well Control (IWCF valid to February, 2005).

1972-1974 Southern Alberta Institute of Technology
Petroleum Technology

1970-1971 Sheraton College, Brampton, Ontario
Business Administration

1964-1969 Central Peel High School, Brampton, Ontario
Senior Matriculation in Business

CAREER HISTORY

I have 26 years experience within the oil and gas industry. the last 17 years of which I have been working as a drilling/completion consultant in Russia, Saudi Arabia, Algeria, Libya and Greece. This extensive international and national experience has provided me the opportunity to develop and refine industry expertise in a wide range of areas, including off-shore work, arctic and remote desert locations in both drilling and workover operations.

Nov '03 – Jul '04 LUK OIL/NOR YAN MAR PROJECT
Directional Drilling Consultant
Description
- Drilling depth 4,200m.
- Upper and lower Devonian zones.
- KOP - 500m, EOC - 730m
- MWD – LWD HP/HT – up to 11,300 psi
- Open-hole logging, coring, casing design, two-stage cementing, and stratigraphic evaluation.
- Cost estimating and bid tenders from service companies.
- Analysis of operations to improve cost, safety and engineering down-hole effectiveness.

2001 – 2003 SAUDI ARAMCO/AMAREST
Drilling and Workover Supervisor
Description
- HP/HT "Kuff" gas work over and re-entries.
- 10 Tonne ISP 16-30. - 12 ga. Frac-pac gravel pack ops.
- Open & cased hole logging 15K Drill stem testing.
- CTU procedures utilizing N2, wellhead and BOP testing.
- DTL & PTL/ TD 17.400 FT w/ top drive system, 2000 HP rig.
- Extreme milling operations/ PBR Completions.
- 4 ½" - 7" liner hangars with chrome Van Top HC tubulars.
- HS&E issues, work permits, safety & fire fighting drills.

1998 - 2000 CEPSA/SONATRACH - ALGERIA
Drilling & Completion Supervisor
Description
- Drilled and completed 6 wells to 3 725m (from 42-55 days).
- Oil-based mud system with Centrifuge (invert emulsion 15.9ppg). LSND & Polymer mud systems.
- Open hole logging, coring, casing design, two stage cementing, and stratigraphic evaluation.
- Cost estimating and bid tenders from service companies.
- Analysis of operations to improve cost, safety and engineering down hole effectiveness.

1996 - 1998 CEPSA/SONATRACH - ALGERIA
Field Production Supervisor
Description
- Supervision of all workover, completion programs and design.
- Operations involving snubbing, wire line, TCP perforating. well testing thru separators.
- Inventory control and purchasing of well heads, ESDV & SSSV safety valves, tubular goods, and all down hole tools.
- Pipeline corrosion and repair programs, lease preparation, roads, and water wells.

1994 - 1996 SIRTE OIL COMPANY - LIBYA
Production & Drilling Supervisor
Description
- Drilling to 13,750 ft. - quartzitic sandstone formations.
- HT/ HP operations using Baker Oil Tools.
- Expansion jts. Wire line set packers with stinger assembly.
- DST open and cased hole.
- Utilization of all cased hole logging, cementing, selective acidizing 15-28% HCL and all down hole tool techniques.
- Horizontal completions and workovers.

1990 - 1993 CHRISTIAN INTERNATIONAL – LIBYA
(contracted to Arabian Gulf Oil Company)
Completion & Drilling Supervisor
Description
- Drilled two exploratory wells to 15,000 total depth.
- 36" conductor barrel to 8½" main hole.
- Two & three-stage cementing procedures.
- Open and cased hole logging procedures.
- Good working knowledge of mud systems, solids control and formation evaluation.
- Workovers involving casing liners, permanent packers and gas lift operations.

1988 - 1990 NORTH AEGEAN PETROLEUM COMPANY
Kavala, Greece - Offshore
Description
- Fixed platform in 420m water.
- 61% H2S.
- Average depth per well: 2,820m.
- Dual production/gas injection.
- HP/HT LSND Polymer mud system.
- Responsible for all safety and evacuation procedures on production platform as well as drill deck platform.
- Facilitated all management and administrative reporting such as production logs, workover daily status reports and communications with other departments.

With such a high (61%) H2S count and major 'asphalting' problems, constant wireline and coiled tubing techniques were employed to work with a dual string capacity. Constant corrosion of production strings and casing had us "fishing" most of the time in which I was responsible for the make-up of all down-hole tools.

LOCAL CONTRACT WORK

1984 - 1988 Company APEX ENERGY & GEOSITE
Position Drilling Consultant
Worked for B.P. of Canada
Alberta Energy Corporation
St. Albert Oil & Gas

Company PAJAK LAND & OFFSHORE LTD.
Position Workover and Completions Consultant
Worked for Merlin Exploration, Home Oil, Chevron Canada

Company SOUTH RIDGE PETROLEUM
Position Drilling, Workover and Completions Consultant
Worked for Paramount Resources

1982 - 1984 ARABIAN GULF OIL COMPANY (AGOCO) - LIBYA

Description
- Average well depth 9,800'.
- Reda and Kobe submersible pumps. Artificial gas lift systems (Otis & Petrol).
- Supplies for rigs, bits, drill pipe, fishing equipment, wellheads.
- Daily reporting on and supervising up to 8 service and drilling rigs.
- Teaching national personnel drilling and workover procedures.

1975 - 1980 Company CHALLENGER DRILLING
Position Tool Push, Workovers & Completions

PERSONAL
Interests Travel, sports.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6001 to 6050 of 15416)

Go to Search Parameters...

Brief Description

Coal Bed Methane Drill Site Supervisor

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

Condition monitoring Engineer with 7 years experience in oil and gas industry

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Quantity Surveyor able to takeoff, variation claims, valuation, computers,caddrawing

Having 14 years of work experience in Ship Building/Repair, Petroleum and Mining industry in both Philippines and Dubai (UAE).Worked as Insulator, Tinsmith, Pipe fitter, Fabricator and CAD Operator for mechanical and structural works. Used AutoCad Software as drafting tool.

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Oil & Gas Land services

Procuction,project,commissioning experience in chlor alkali industry

journeyman electrician

Diploma in mine survey from the Zimbabwe school of mines. All round surveyor capable of all underground surveys plotting and reports; all surface surveys including all setting out, pit surveys and volume calculations, road surveys,cut and fill calculations using total stations, GPS & automatic level

Landman

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Fluent in English and Filipino. Knowledgeable in computer and customer service related works. Possessed with proper knowledge, good quality of administrative and banking skills and right attitude. Interests include surfing the net and socializing with people. Goal-oriented, adaptable, determined and

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

James is a biologist in marine and coastal ecosystems and associated marine issues, as well as geographical information systems (GIS).

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

Civil engineer

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 [ 121 ] 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out