Resume - A Senior Project Engineer with a wide range of experience in Construction and Ma...

Misco Jobs

Resume #26380

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATION:
Graduate in Mechanical Engineering

PROFILE:
A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives. Excellent analytical, problem solving skills. Dedicated to maintain Safety and Quality at the highest level.

EXPERIENCE:

Total Fourteen Years of experience in India and abroad.
From June 2004 to Till date
Company: Integral Services Co.W.L.L

Project Title: Ethane Maximization Project ( Project No 400000339)
Client: Kuwait National Petroleum Company, Mina Al Ahamadi Refinery and Equate Petrochemical Company, Kuwait
Position held: Construction Manager

- Responsible for the Project starting with Scheduling and Monitoring.

- Demolition and Construction activities are carried out as per KNPC and ASME standards.

- Attending daily, weekly meetings with the client.

- Presentation of weekly, monthly progress reports to inspection agencies and client.

- Preparation and Review of Mechanical / Piping Plans and schedules for Pre shutdown and Shutdown activities.

- Achieved safe 220000 Man hours with zero LWC.

- Received Reward from Client for early completition of the Project.

- Received Safety award from M/s.KNPC for best performance.

From May 2003 to June 2004
Project Title: Revamping of Boiler
Client: Ministry of Electricity and Water Shuwaikh Power Station, Kuwait.
Position held: Engineer in charge

- Responsible for the complete project starting with Tendering to award of the contract.

- Develop and maintain an integrated plan / schedule for the above said project.

- Finalizing project consultants for the project, material procurement finalization and ordering of the project materials with client's approval, budget approval and invoice submission to client.

- Initiate all correspondence with the client, consultant, vendors and subcontractors like M/s. KSB Pumps Germany, Howden UK, Rotork Germany, BMS Logic from Deutch Babcock.

- Actively participated in the weekly, monthly review meetings with MEW. (Client)

- Weekly, monthly reporting of project progress, performance analysis reports, updated schedule reports.

- Handled pressure part dismantling with approved procedure and techniques.

- Erection of Boiler pressure parts as per ASME standards.

- Credited with the first company to carryout boiler revamping work with ¡* R¡¨ stamp in Kuwait.

- Inspection coordination closely with the third party inspectors of M/s. BV, Lloyds.

- Achieved safe 250000 Man hours with zero LWC.

From September 2001 to April 2003

Project Title: Annual Mechanical Maintenance
Client: Ministry of Electricity and Water Shuaiba Power Station, Kuwait.
Position held: Turbine and Sea Water Facilities Engineer

- Responsible for the complete annual shutdown activities starting with planning, scheduling of Man Power and Materials.

- Involved in the replacement of carbon steel seawater inlet and outlet pipe lines.

- Involved in maintenance of different types of Rotary screens, Pumps, Valves, Heat Exchangers, Coolers etc.,

- Involved in heat exchanger re tubing, on line repair work.

- Erection of Turbine pumps and coolers.

From September 1999 to August 2001
Company: M/s. SICA, Shaw Wallace Company, Pondichery, India.
Position held: Asst. Manager (Projects)

- Completed revamping of brew mills, boiling vessels supplied by Krones, Germany.

- Involved in construction of weigh bridges, storage sheds and vessels.

- Erection of refrigeration compressors, agitators and cooling towers.

- Involved in fabrication and erection activities of storage tanks and related pipelines.

- Acted as an internal auditor for ISO 9002 and 14001.

From August 1993 to August 1999
Company: M/s. SAFL, (SPIC Group, India)
Position held: Project Engineer

- Executed Effluent Treatment Plant aerobic and anaerobic system starting from primary to tertiary stage project involving third party inspection agency and pollution control Government organization.

- Constructed storage tanks, gas holding tanks and related pipe lines.

- Carried out distillery unit revamping with major modification in the cooling and heat transfer sides.

- Erection of cooling towers, boiling vessels, pumps, floculators, agitators are worth to mention.

- Supervised re tubing of fire tube boiler and heat exchangers.

- Completed carbon steel pipe line of 12 inches dia for a distance of 25kms from sugar factory to intake facility at mixing plant.

- Actively involved in the procurement, erection, execution, commissioning of FBC Boiler.

From September 1992 to May 1993
Company: M/s. SKODA (I) Engineering, Madras, India.
Position held: Engineer

- Responsible for the actuator manufacturing project involving development of drawings, fabrication of spares and assembly.

- Handled service facilities pipe lines.

From May 1991 to August 1992
Company: M/s. Chandra Industries Ltd., India.
Position held: Engineer

Responsible for the revamping of workshop facilities with advanced machineries erection and modification in the plant piping.

Major Achievements
- Saved company in multi thousand dollars by completing the projects well in ahead of schedule and also earned company in way of bonus from clients.

- At ISCO - Saved more than $ 100,000 in Ethane maximization Project.

- At ISCO - Saved more than $ 125,000 in Boiler revamping Project.

- At SAFL - Saved more than $ 60,000 in effluent construction Project.

TRAINING COURSES
Various courses including Project Management, Planning, Quality, Leader ship Training, Cost Control, Accounting, OSHA Training, ISO, SHE, SHEMS,QMS Training.

Holder of Kuwait Driving Licence

Reference:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6101 to 6150 of 15477)

Go to Search Parameters...

Brief Description

Civil engineer

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

Sound understanding/ implementing of HSE Management System.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

Phisicyst with Power Electronics specialization

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Years of exp. in the Western U.S. and South America. Exploration trough production with the big five surface and underground operations. Understands South America.

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I have spent 23 years in the extractive and minerals processing industries.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 [ 123 ] 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out