Resume - Well rounded in Experience: Well Engineering, Production Engineering, Project Ma...

Misco Jobs

Resume #27015

CONTACT INFORMATION:
View contact information...

CAREER ACCOMPLISHMENTS
Shell Malaysia Exploration & Production, Miri, Malaysia Jul. 05 – Present
Position: Deepwater Well Engineer Operations v Lead technical limit aspiration efforts in Deepwater offshore Sabah operations v Monitor and Supervise Daily Drilling operations for Malikai Project operation

Shell International Exploration & Production, Rijswijk, The Netherlands Sep. 03 – Jul. 05
Position: DtL Well Engineer (Drilling the Limit Performance Consultant)
- Focal Point to deliver step change performance in the EPA region.
- Developed TL calculator and TL time setting target tool v Constructed, developed, and implemented DtL Well Delivery Staffing Best
Practice Model throughout all Shell Regions.
- Co-lead readiness review audit for Ormen Lange big bore wells in Norway v Conduct and Participate in Peer Assisted Value Challenge/ Concept Design
Challenge/ DWOP
- Lead Kaizen learnings introduction and TL Execution into Russia Low
Cost Wells Study v Coordinated 2005 EPA Technology Week Conference

Shell International Exploration & Production, Rijswijk, The Netherlands Feb. 02 – Sep. 03
Position: Production Technologist (Smart Wells Implementation team)

- Co-authored a technical paper titled "Controlling Water Production Using
Intelligent Completion Technology in Multi-Laterals Saih Rawl Field, Sultanate of Oman" presented 2003 High-Tech Wells Conference in Galveston, Texas.
- Provided technical expertise on PDO "Smart Well" project involving the installation of four Well Dynamics interval control valves to control high water cuts in a 4 leg multilateral well resulting in a 28% decrease in water production and a 1385 bbl/day increase in oil production.
- Technical advisor and Shell witness point for Brunei Shell Petroleum in the successful installation of the Bugan-07 smart completion involving three
Weatherford ROSS valves, four Expro PT gauges, and Sensa DTS in a 4 zone well.
- Mentor for new engineers coming into the smart well deployment field. This includes well site and office guidance into the duties expected of a Production Technologist.
- Presented PDO, 10 well ICV trial installation practices, costs, results and way forward to Shell and PDO management in turn securing approval for 10 well/
40 ICV project. Total project to increase field production by 1000m3/day.
- Flow control valve and subsea deployment focal point for smart wells team.

Chevron Co. USA, Midland, Texas. Apr. 01 – Feb.02
Position: Production Engineer / Technologist (Area Production Engineer)

- Production Engineer for New Mexico EMSU and EMSUB (+/-400 wells) fields.
Designed and implemented workover and completion designs for the EMSU and EMSUB waterfloods.
- Prepared operating budget for EMSU and EMSUB and designed field plan in accordance with operating budget guidelines. Increased production 9% while staying under budget 11% during role as area PE.
- Develop and edit numerous secondary recovery programs to increase production using water injection, acid stimulation, and selective cement placement.
- Represented Chevron Permian Basin Business Unit at career day to introduce students to a career in the oil business.

Chevron Co. USA, Lafayette, Louisiana. Jan. 98 – Apr. 01
Position: Well / Completions Engineer (Drilling Representative)

- Supervise daily drilling and completion operations of a Mobile Offshore
Drilling Unit on several locations in both state and international waters.
- Amend drilling and completion programs to account for real time field situations.
- Supervise drilling operations of land drilling unit in south Texas

ENSCO International Offshore Co., Broussard, Louisiana. USA. May. 97 – Jan. 98
Position: Well Operations Trainee (Operations Engineer)

- Participated in the ENSCO Engineer Trainee Program.
- Worked several positions on a Jack up rig including roustabout and floor hand. Assisted in the completion of the nightly drilling report. Outlined engineer trainee candidates assignments and responsibilities.

SIRGO Brothers Energy Corporation, Farmington, New Mexico, USA May 94-96 – Sep. 94-96
Position: Engineer Trainee (Summer program)

- Lead roustabout supervising a crew of four. Maintained water supply for drilling rig including installation of water supply line, constructed reserve pits, plan surface layout including spotting equipment. Assembled wellhead.
- Liaison between New Mexico BLM and company to assure activities would not violate government laws or procedures.

CAREER RESPONSILITIES
Position: DtL Performance Improvement Consultant Sep. 03 – Jul. 05

Primary duty is to act as Drilling the Limit performance improvement consultant in Shell's EPA region while implementing the Well Delivery
Resourcing Best Practice Model. Technology implementation and best practice benchmarking liaison between Global Shell regions. The duties as a DtL performance improvement consultant included:
* Drive well delivery performance improvement
* Implement Well Delivery Process
* Transfer learnings between regions
* Developed DTL action plan for 2004-2005 along the guidelines of the
DTL business plan before end Feb 2004
* Co-ordinate running of key peer assisted events for EPA
* Capture best practices and share with other regions.
* Communicate best practices from other regions to own region and promote/verify application
* Lead EPA Health checks with involvement of WELLS activity leader or discipline leader
* Organize train the consultant events for EPA
* Promote setting and use of TL as a way to drive performance in the region
* Liaise with GIT's to have latest technology plans & vision available to DTL consultants
* Develop generic procedure for a feedback loop from Technical Limit setting to Technology Development teams in the OU's
* Identify opportunities to AAR technology trials
* Help Wells Global Network (WGN) implement the Global Field Trials
Register

Position: Production Technologist Feb. 02 – Sep. 03

Primary duty is to act as a flow control valve and subsea focal point, providing support to Shell OUs. The secondary duties involve providing production technology support to build smart well business cases. The duties as a production technologist included:
* history matching field production data.
* identifying smart well candidates within the different operating units.
* perform inflow/outflow analysis using WePS to identify gains using smart well technology.
* purpose conceptual completion designs.
* perform economic analysis.
* evaluate project capability of selected vendors
* apply and evaluate new technologies such as FCV's, DTS, flow arrays.
* work closely with PT's from different fields to implement new technology trials.
* mentor for less experienced engineers within the deployment team
* provide smart wells field implementation support to OUs.
* prepare and review technical reports

Position: Production Engineer/Technologist Apr. 01 – Feb. 02

Primary duty was to act as area production engineer. Oversee completion, workover and production operations for two New Mexico water-flood fields. The duties as a production engineer included:
* budget and capital planning
* completion design
* develop workover programs and proposals
* basic reserves calculations
* ensure operations are in regulatory compliance

Position: Well/Completions Engineer Jan. 98 – Apr. 01

Member of Chevron offshore drilling representative group. Supervise and coordinate everyday drilling activities associated with offshore drilling in the Gulf of Mexico. Carry out daily drilling activity plan in accordance with designed drilling program. Duties included.
* evaluate quotations associated with drilling and completion operations.
* evaluated and implement operational best practices.
* organize and coordinate rig moves
* coordinate equipment arrival and departure with shore base
* amend and construct workover, drilling and completion programs
* ensure company operations were conducted in a safe manner and within MMS and NPDES guidelines.

Position: Well Operations Engineer May. 97 – Jan. 98

Participant in ENSCO offshore Engineer Trainee Program. Earned valuable offshore equipment knowledge by being able to work from a roustabout up.
Duties included:
* complete nightly well drilling report.
* observe operation responsibilities from tool pusher and driller
* Rig floor hand for 6 months
* Rig roustabout for 3 months

EDUCATION
Sept. 91 – May 97 Texas Tech University, Lubbock, Texas, USA. B.Sc. in Petroleum
Engineering

PROFESSIONAL AFFILIATIONS/ HONORS
Oct. 97 - present AADE (American Association of Drilling Engineers)
SPE (Society of Petroleum Engineers)
Nov 04 Earned special recognition award for development of BP Staffing Model

COMPUTER SKILLS
* Proficient in MS Word, PowerPoint and Excel.
* Proficient in Shell's proprietary well performance simulator (WePS).
* Shell Well Cat Well Modeling simulator program

TRAINING
- Industry technical and safety courses:
* Shell Production Technology P264, Noordwijkerhout, NL
* IWCF Well Control Certification Aberdeen Drilling School (Good until April 06)
* Shell Well Engineering Round II Certification, Noordwijkerhout, NL (ongoing)
* Shell Well Engineering Distance Learning Package, Noordwijkerhout, NL
* Shell Advanced Casing Design, Aberdeen, Scotland
* Shell Round II Prep Course, NAM, NL
* Shell Production Technology 144, Noordwijkerhout, NL
* Shell Well Control (Surface and Sub-surface), Robert, Louisiana.
* Shell Fire School RISC - Rijswijk, The Netherlands
* Brunei Shell Petroleum BOISET - Helicopter Underwater Escape, Offshore
Survival & fire-fighting training, Brunei Darussalam
* Shell / OGCI - Reservoir Engineering for Other Disciplines, Houston, Texas.
* Chevron/BP DTC - Drilling Practices, Houston, Texas.
* Chevron/BP DTC - Drilling Leadership Management, Houston, Texas.
* Chevron/BP DTC - Solids Control Planning, Houston, Texas.
* Chevron/BP DTC - Advanced Drilling Fluids, Houston, Texas.
* Chevron/BP DTC - Primary and Secondary Cementing, Houston, Texas.
* Chevron/BP DTC - Drilling Transition/Depleted Zones, Houston, Texas.
* Chevron/BP DTC - Casing Design, Houston, Texas.
* Chevron/BP DTC - Drill String Design, Houston, Texas.
* Chevron - NPDES training program, Lafayette, Louisiana.
* Chevron - Rod Pump Optimization, Midland, Texas.
* Chevron - Artificial Lift Seminar, Odessa, Texas.
* Chevron/Schlumberger - Peep Analysis and Decision Tree, Midland, Texas.
* Marine Water Survival - University Southern Louisiana, Lafayette, Louisiana.
* Randy Smith Well Control - Lafayette, Louisiana.
* Marine Firefighting School - Delgado Community College, New Orleans, Louisiana.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8351 to 8400 of 15361)

Go to Search Parameters...

Brief Description

Oil & gas landman with experience in leasing, lease negotiating and writing, & abstract building.

Completed my BE (EEE) in india (tamil nadu) in the year 2003-2007.i did one year training in the electrical ,control & instrumentation department

Vacation Job for Graduated Mechanical Enginner

I have 08 years experience in QA/QC NDT, and Welding inspection Field.

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

I POSSESS GOOD COMMUNICATION SKILLS AND I`M CAPABLE OF TEAM WORK.I`M AVAILABLE TO WORK FOREIGN COUNTRIES

I have a good practical knowledge to operate and trouble shoot the following instruments.Spectrophotometer . Gas Chromatograph. Flame photometer. Karl Fischer. Atomic Absorption Spectrometer.Auto Titrator .Flue Gas Analyzer.Ion Chromatograph.Ion selective Electrodes.Viscometer

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

Operate and maintain all aspects of a continuous process plant. This includes the operation of distillation towers under vacuum and pressurized systems with both trays and packing. Operate centrifugal pumps, hydrogen compressors, and thin film evaporators. Operate and maintain all aspects of a cru

Senior operator diploma of mechanical

Bachelor of Engineering, In Electronics and Communication Engineering , „« Currently Working as a Project Trainee Engineer for Bharat Electronics Limited,

Design Engineer with more than a year experience in basic design in ship buildign and boat building industry

draughting

oil and gas shutdown plant inspector and ndt technican

I have 30 years of working experience in Electrical, Mechanical, Construction and Safety environment; this has been obtained in the Mining, Petrochemical, Manufacturing and Construction industry. I am an experienced, responsible, proactive and self-motivated person, with good interpersonal skills an

I am a multi-dimensional Office/IT manager. My most important strength is my ability to complete assignments and job duties thoroughly, accurately and timely.

13 years experience in Projects, Planning, Testing, Commissioning, CNC /PLC Machines troubleshooting/ Maintenance and calibration of electrical equipments and machines in oil & Engineering field.

Civil Engineer - PE

Bachelor of Engineering (Mechanical)

Mining and petroleum engineer for 5 years, and safety researcher for mining industrials in indonesia for 2 years.

Jackleg, jumbo, mucker, production and development, all types of ground support.

A Mechanical Engineer with Vast experienced in ISO 9000,ISO 14000,QS 9000 and OHSAS 18000 Systems and experienced in Third party inspection and certification services.

HSE Management

Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser

VP TECHNOLOGY / SOFTWARE DIRECTOR / CTO -- Global Project Management ~ Enterprise Software Development ~ Business Automation ~ ROI-focused Evaluation and Implementations ~ Strategic Analysis, Planning and Solutions ~ Cost/Budget and Quality Oversight ~ Software Design & Methodologies

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Field Engineer with knowledge in petroleum and geology

Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.

Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.

Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience

Good with Microsoft for Windows. I regard with my self as a communicator both English and Indonesia with high level motivation and self reliance and able to apply both analytical and creative solution to problem solving. Have a good educational background in operation, marketing in Banking & Export

I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)

35 years experience in open pit mining, started as operater worked my way up through the ranks to head of department mining, present employment.

BGAS/CSWIP Painting Inspector Grade 2

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Diesel fitter, supervisor, work shop planner

Automation, control engineering in industrial plants

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

Area Maintenance Static Supervisor

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 [ 168 ] 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out