Resume - Professional Engineer, Degree (AMIE Mechanical), with (14 years of International...

Misco Jobs

Resume #27087

CONTACT INFORMATION:
View contact information...

CURRENT ASSIGNMENT
From July 2004: Working as Plant Controller for Aban Power Co. Ltd., India for the commissioning, startup and operation of 120MW combined cycle power plant (GE 6FA gas turbine,168 TPH Thermax HRSG with supplementary firing and a 55MW Siemens Steam turbine)
Since July 2004 I was involved in the commissioning of a GE 6FA gas turbine in Aban Power Co. Ltd. I had assisted the GE field engineer in completion of erection, checking the completion of all system as per P&ID, carrying out precommisioning activities, Red flag review audits, Mechanical tests, Load tests etc.There after carried out the startup and operation of the Gas Turbine through mark-V control system.
At present I am involved in the startup and commissioning of the 168 tonnes per hr HRSG (supplied by Thermax-India) and a 55MW siemens steam turbine.

REFERENCE
Upon request

PREVIOUS ASSIGNMENTS:
(A) November 2003 to June 2004: Worked as Power Plant Foreman with Greater Nile Petroleum Operating Co. Sudan in 100 MW onshore Diesel Power Plant

(B) July 2000 to November 2003: Worked with Rolls Royce Industrial Power India Ltd.Kakinada AP for the O & M of a 208 MW combined cycle power plant in India consisting of 3 X 46 MW 251B11 Siemens Westinghouse gas turbines and a 70MW Parson's steam turbine.
Joined as Operations Engineer in July 2000 and promoted to plant control engineer in June 2002

Responsibilities:
1. Start up, Shut down, Routine and Emergency operation of power plant main equipments-Gas Turbines, HRSG, Steam Turbine and auxiliaries following "safe and standard operating procedures".
2. Isolation and Normalization of all above equipments for maintenance following "permit to work system".
3. Identification of faults, troubleshooting and liaising with maintenance department through "Computerised Maintenance Management System".
4. Electrical switching, isolations, normalization and load transfers ranging from 415 Volts to 220KV.
5. Daily monitoring of plant parameters, logging and shift reporting.
6. Calculation of Efficiency, Performance, Load factor, Heat rate etc.
7. Imparting training to new entrants and subordinates.
8. Preparation of Standard operating procedures.

(C)September 1998 to June 2000: Worked as Gas Turbine and Waste Heat Boiler Operator with Dubai Aluminum Co. Limited Dubai UAE in its captive power plant consisting of GE frame-5,9B and 9E gas turbines (total installed capacity of 1000MW).
Responsibilities: Field operation of gas turbine and waste heat boiler.

(C)July 1991 to August 1998: Worked as Junior Engineer (Operation) with Madhya Pradesh State Electricity Board, India for the operation of 210mw X 4 coal fired thermal power plant.
I was inducted as a trainee, and after 15 months of classroom and on job training in operation of thermal power plant was given charge of operation of coal fired boiler, steam turbine and all its auxiliaries from control room.

EDUCATION

Languages: English, Hindi/Urdu

Educational degrees:
(1)AMIE in Mechanical Engg. from The Institution of Engineers (India) Calcutta.
(2)Diploma in Mechanical Engineering from Government Polytechnic in the year 1988

Computers: Well versed in Microsoft office and windows.

AVAILABILITY: immediate

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5601 to 5650 of 15497)

Go to Search Parameters...

Brief Description

5 years working experiance as a QA/QC Engineer

Gold madelist in MS process engineering and Bsc Chemical Engineering. i am familiar with almost all the chemical engineering softwares and have a good experience of using them. I can diagnose a problem esily and propose the solution to that problem effectively

My background has afforded me many "intangible" qualifications one can't learn from a book. Qualities such as resourcefulness, team leader, adaptability, pride, and common sense are just a few; protocol including integrity, accountability, and a honest work ethic make me a cut above the rest.

Pipe Stress Engineer

My major skill is mangement and idi Master in Management science

Detailed Engineering, INtools(User & Administrator Module), 3D PDS, SPR, Navis works.

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

Well Planning, Log Interpretation, Geosteering of horizontal - deviatedated - vertical wells. Excellent userof IT Application Software.

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Willing and able to perform ones job with less supervision

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Well Testing with Data Aqusition Supervisor with 10 years experience in Schlumberger and MB petroleum compaqny.

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

Extensive experience in the Electric Sumbersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

16 years in Oil & Gas Offshore/Onshore production cum Process operations

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Fourteen years experience as a Material Specialist in Oil & Gas Field Drilling Company at Libya, G.S.P.L.A.J. Work includes co-ordination and administration of all the activities and operations of the warehousing area for the supports and services of the company’s drilling, oil handling, engineering

Professional Engineer, Degree (AMIE Mechanical), with (14 years of International and domestic experience) in operations of large thermal, gas and combined cycle power plant in India, Dubai and Sudan

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

15 years experience in the Machinist trade on both CNC and manual machine tools.

i m very hardworker

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

COURSE IN HUMAN RESOURCES AND INDUSTRIAL

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

Six years of experience working for various companies in Human Resources practice!

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

DCS Operator for Fractination/Distillation of Fatty Acid,Distillation of Glycerin,Pretreatment of Oil,Splitting Column,Pretreatment of Glicerin Water,Boiler,Steam Turbine,Oil Thermal Heater,Hydrogen Production by Steam Reformer and Methanol Reformer

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

ENVIRONMENT ENGINEER

Oil & Gas Accountant with 14 years of A/P, general ledger, JIB, joint venture and sales tax audit response, and revenue experience on OGSYS accounting system.

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 [ 113 ] 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out