Resume - 10 years working experience in the field of QA/QC Inspection, Project Managemen...

Misco Jobs

Resume #2784

CONTACT INFORMATION:
View contact information...

Date of Birth: 23rd November 1972.

Citizenship: Malaysian

Race: Indian

Academic Qualification: 2001-2002
Bachelor of Science in Construction Management from Greenwich University, Australia under a program by Shermont Graduate Studies Sdn. Bhd.

1991 - 1994
Diploma in Mechanical Engineering from Federal Institute of Technology, Malaysia.

Oct 2002 - Present (expected to complete by MAY 2003)
Pursuing Project Management Professional Certification Program, a program under Project Management Institute, which is currently being organized and conducted by Business and Advanced Technology Center (BATC), University Technology Malaysia.

Training & Seminar
Attended:

March 2003
Understanding, Documenting & Implementation ISO 9001:2000 QMS, organized by NEVILLE CLARKE (M) SDN BHD - JOHOR BAHRU

January 2003
PRIMAVERA #601 Planning & Scheduling with Primavera Project Planner, conducted by HSS INTESYS SDN BHD.

August 2002
Welding Inspector Steel Course - CSWIP 3.1 conducted by TWI Training & Certification (SEA) Sdn. Bhd., Sg. Buluh, Selangor D. E., Malaysia. (C. N.-02/WIS5KL/427)

September 1995
Basic Personal Survival At Sea (OTS/03) & Offshore Safety Orientation (OTS/01) conducted by Overseas Technical Service (M) Sdn Bhd in Collaboration with Esso Production Malaysia Inc.

CCTV, MATV and Intercom Installation at AVT (Audio Video Technology)

Computer Aided Design (Auto CAD) at Budi Gauge and Tools Sdn. Bhd.

Language Proficiency: Able to communicate spoken and write fluently in, i. ) English ii. ) Bahasa Malaysia iii.) Tamil

Computer Literacy: MS Word/Excel/Access 2000, MS Windows 98/& MS Project 98.

Additional Information: Capable of producing Installation Procedure, Rectification Method Statement or Repair Procedure, Inspection & Test Plan, Inspection Report Formats. And also familiar with most Construction Codes and Standards such as:-
* ISO9001:2000 QMS
* ASME SECT VIII DIV. I & II.
* ASME SECT IX.ASME B31.1
* ANSI/ASME B31.3
* API 1104 & 650
* AWS D1.1

Oct. ¡¦01- Present
1st Silicon Wafer Fabrication Plant
(Defect Reliability, Warranty & Final Close Out)
Employer: M+W Zander (M) Sdn Bhd
Client: SEDC/1st Silicon Sdn Bhd., Kuching, Sarawak.
Defect Coordinator (Closeout & Hand-Over)

Nov.¡¦99 - Sep. ¡¦01
1st Silicon Wafer Fabrication Plant
Employer: M+W Zander (M) Sdn. Bhd.
Client: Turner & Townsend (M) Sdn Bhd project PMC & SEDC/1st Silicon Sdn Bhd. Kuching, Sarawak.
Field Engineer cum Coordinator (Mechanical System)

Dec. ¡¦98 - Nov.¡¦99
BASF Petronas Chemical Acrylics Complex
Employer: Bechtel Shapadu Consortium
Client: BASF Petronas Chemical, Gebeng, Kuantan, Pahang, Malaysia.
QA/QC Mechanical Inspector / Supervisor

Aug.¡¦98 - Nov.¡¦98
MNI Pulp & Paper Recycling Plant
Employer: Malaysian Newsprint Industries (M) Sdn Bhd.
Client: Hong Leong Berhad. Temerloh Insdustries Park, Pahang, Malaysia
Mechanical & Electrical Supervisor cum Coordinator

Jul.¡¦97 - Aug.¡¦98
Malaysia Newsprint Industries Pulp & Paper Recycling Plant.
Employer: Stork Comprimo (M) Sdn. Bhd.
Client: Malaysian Newsprint Industries/Flasher challenge, New Zealand
Mechanical & Instrument Supervisor

Feb. ¡¦96 - Jun.¡¦97
KLCC Suria Retail Podium Project.
Employer: HENZ Construction Sdn. Bhd.
Client: KLCC Berhad.
QA/QC Supervisor (Mechanical System)

May.¡¦95 - Jan.¡¦96
The Mines Resort City Waterfront Business Park Project.
Employer: Strategic Alliance Construction Sdn. Bhd.
Client: Country Height Berhad
M & E Supervisor / Coordinator

Aug.¡¦94- Mac.¡¦95
Venice Hill Condominium Project.
Employer: Kim Hup Seng Construction Sdn. Bhd.
M & E SupervisorJob Responsibilities (per discipline)

Oct. 2001 - Present:Defects Coordinator (Closeout & Hand-Over)

„« During the Plant Defects Liability & Warranty Period, I was assigned as a Defects Coordinator to closeout all outstanding issue for the final hand-over and closeout of the project and report to commercial Director.

Scope of Responsibilities

* To closeout Punch-list, Defect Notification (DN), Design DN, Latent DN, Recurring DN and Non Conformance Reports (NCR).
* To Review Contract Documentation, Project Procedure and Tender Specification before engaging specific contractor carryout rectification work.
* To maintain and update a log of Defect and Non Conformance Reports (NCR) closeout for meeting updates, Retention Claims (5%) and back-charges
* Liaising with other QA/QC personal on the project, including the Client's QA/QC representatives or Project Management Consultant (PMC)
* To recommend solutions, provide technical support and method statement/Procedure for client approval before implementation of work.
* To provide close monitor on contractor's performing rectification and implement a strong QC requirement on all activity's to prevent reoccurring defect.
* To monitor and conduct internal Quality Audits to gather all documentation for final hand-over activity.

Nov. 1999 - Sep. 2001:Field Engineer cum Coordinator (Mechanical System)

„« Supervising and coordinating the installation of the Mechanical System which comprise of: -
* Rotating & Static Equipment, HVAC System (Chiller Piping, Ducting, Air Handling Unit (AHU) & Make-up Air Unit (MAU) & Control¡¦s), Process Water System (Piping, Storage Tanks (API650) & Booster Tank (ASME VIII Div.1&2)), Process Vacuum System, Process Mechanical System & Sewer Treatment System.

Scope of Responsibilities

* Reporting and updating the Construction Manager and QA Manager on daily activities of construction and site inspection activities.
* To develop and implement a Site Quality Control and Inspection Test Plan based on company requirements for the main activities.
* To records all activity progress and update the Construction Manager and Planner/Scheduler for claim's approval and progress during Construction.
* Monitor Implementation of Project Quality Plan, Project Procedures and conduct internal and external Quality Audits as directed by QA Manager and recommend corrective actions on deficiencies found.
* Coordinate and attending to all related inspection and testing with both client and sub-contractors such as welding procedure qualification test (WPQT), welder qualification test (WQT), Non Destructive Testing & film interpretation to API650 RT, pneumatic & hydro test, equipment installation & alignment, system punch-listing, system commissioning & start-up & etc.
* Monitor and inspection of Painting & Blasting process (WFT, DFT), Dolly test (pull-out test) and blasting to SA2.5 and SA2.0

„« During Wafer Equipment hook-up activities, was in-charge of supervising and coordinating QA/QC implementation, which comprised of Process Vacuum, Process Cooling Water, Process Drain, General, Solvent and Acid-Acoustic Exhaust System.

Scope of Responsibilities
* Responsible to maintain log on daily QA/QC inspection and installation progress.
* Monitor implementation of Field QC Plans on daily activities of Sub-contractors and documentation during work progress.
* Interfacing directly with Client Representative (Project PMC T&T) and Client Engineers (1st Silicon) on all inspection and technical inquiry on final hand-over for tool energization

Dec 1998 - Nov 1999:QA & QC Mechanical Inspector cum Supervisor

„« Monitor Implementation of Project Quality Plan, Project QA/QC Procedures and supervising the installation of the Mechanical System which comprise of: -
* Rotating Equipment (Nuovo Pignone Centrifugal Compressor (Gas Turbine), hydraulic lube oil & Pumps), Column, Pressure Vessels, Heat Exchanger and Water Tiub Boiler and steam turbine installation. (oschatz)

Scope of Responsibilities

* Responsible for implementation of project quality plan, site quality control and conduct daily inspection on Mechanical Equipment Installation inspection such as: -
* Level Check, Horizontality and Verticality Check, Pump/Equipment Alignment Check, Vessel and Column Internal Inspection.
* Performing inspections of all mechanical work in progress on continuing basis, witnesses tests and completes final P&ID check prior to turnover to client.
* Determining priorities for mechanical installation through consultation with superintendent.
* Assisting the Field Procurement Supervisor in inspection and receipt of mechanical equipment and setting-up at job site for storage, protection and preservation before installation. (weekly inspection basis)
* Assisting the Mechanical Superintendents and Field Engineering Manager in solving mechanical problems went needed.
* Supervising and Inspecting of Visual & fit-up inspection, Post Weld Heat Treatment (PWHT), Magnetic Particle Inspection (MPI) and Penetrant Test (PT) for Boiler Piping and Gas Turbine as per project QA/QC requirement.
* Verifying installation quantities reported by the subcontractors.
* Providing technical assistance and secure necessary Vendors¡¦ services for the final check out, turnover and commissioning of the plant. Assisting in securing the Client acceptance of documentation handover for record.
* In charge of 1st Mechanical Completion (1st MC) prior to hand-over, liaising with all parties such as E&I, Mechanical, Piping, Painting, and insulation supervisory team to solve all punch list issue and turn to commissioning team.

Aug. 1998 - Nov. 1998:M&E Supervisor cum Coordinator

„« Directly hired by MNI for the duration of three months to assisting MNI in finalizing all activities related to fire fighting and telecommunication system prior to final inspection.

Scope of Responsibilities

* Supervising and Coordinating with Authority Engineer, Sub-contractor & liaise with Local Authority (e.g. Jabatan Telekom & Jabatan Bomba) in getting the Permit To Operate (PTO) & final hand-over to MNI.
* Liaise with contractors on final touch-up work prior to Local Authority inspection and prepare all necessary documentation e.g. As Build drawings and approved drawing by Bomba, Inspection and Testing Reports.
* Monitoring and clearing all outstanding punch list and Non Conformance Reports (NCR)
* Develop and implement a site quality control and inspection plan prior to final hand-over.

Jul. 1997 - Aug. 1998:Mechanical & Instrument Supervisor

„« Undertaking the duty of Engineering, Supervising, Quality Control and Coordinating work for:-
* Mill wide underground piping, aboveground piping, steel structure pipe rack (AWS D1.1) and mechanical installation (pumps, pump room & water intake), process piping, fire-fighting system. HVAC system, telecommunication system and security system.

Scope of Responsibilities

„« MECHANICAL SERVICES
* Underground / above ground piping for mill wide fire hydrant system, cool water, process piping, pump room set-up, rotating equipment installation, chiller plant room piping, fire fighting system and to prepare ITP, and inspection forms prior to final inspection.
* Supervising and coordinating of NDT, RT, MP, PT for stainless steel and steel pipe work. Filling/documenting all related inspection and reports any finding to QA/QC Manager.

„« INSTRUCMENT CLEAN & DRY AIR SERVICES
* Compressed air pipe line for plant wide.
* Installation of dryer, dehumidifier, distribution manifold & actuator for mechanical operated damper and pneumatic operated system.
* Supervise the final testing & commissioning of the system with supplier and vendor.

„« PA, TELECOMMUNICATION AND SECURITY SYSTEM
* Mill wide PA system, Plant wide telephone system, Main Distribution Frame Room (Set up)
* PABX (Private Automatic Branch Exchange System), CCTV installation, stroke light installation and IT network cabling installation

Feb. 1996 -Jun. 1997:QA/ QC Supervisor (Mechanical System)

„« Responsible to ensure all work are done according to KLCC QA/QC Requirement and to ISO9000 standard by coordinate & attending to all inspection and testing with both client and sub-contractors such as hydro test, equipment installation & alignment, system start-up & etc.
* In-charge of all Mechanical system installation for building services system as mentioned below:-

„« Mechanical Services
* Pump room set-up & chiller installation.
* Pipe work installation Welding Fit-up & Visual Inspection and Radiographic Testing.
* Blasting & painting for piping work.
* Pump installation, alignment & grouting
* Inspection & documentation
* Testing & commissioning
* Line check & punch list

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8901 to 8950 of 15508)

Go to Search Parameters...

Brief Description

Landman

Knowledge of Ms-Dos ,use of SQL ,use of linux operating system ,use of Oracle on window Analytical skill and problem solving with creativity,

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Recent University of Texas Graduate. Economics/Business Degree.

Mechanical, Estimate/proposal engineer

Mechanical Engineer,Having exp.in Ship Building 4yrs Exp in Tribon M3 and Autocad

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Over 10 years of experience I have developed a good level of IT skills: I regularly use P3 (Primavera Project Planner), P5, P6 as well as Microsoft Office software.

I am self motivated person who is diligent, ambitious, adaptable, willing to learn and to take on new challenges.

Senior Pipe Stress Engineer

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

BE. MECH + CWI+BGAS PAINT. INSP. GR.2+ ISO 2000 lead auditor+ 10 const. & maint. in the field of oil & gas

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

Dear Sir: My experienced assignments cover a variety of projects including project management, translation and negotiating.

Nineteen years experience in mechanical and electrical work offshore Gulf of Mexico

B.com, C A (inter), D C A Having proficiency in the field of accounting and auditing for a period of more than 10 years .

A driven environmental major with positive outlook & expertise in business

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

I am a bilingual and experienced GIS professional looking for a challenging position with increasing responsibility that requires strong technical skills and proven leadership ability.

I am an environmentalist, Holding a MSc in Pollution and Environmental control, with an MSc in Disaster management, BSc. in Environmental Science and Diploma in Computer science. I have an experience of 7 years working with Non-governmental organizations.

Project Information Manager/ Intergraph PDS Administrator & Support

Ø Seeking a challenging position to utilize my education and experience in the field of Pipeline engineering profession. Ø To work in challenging environment and contribute the growth of the organization, to work professionally, honestly and for the prosperity of organization.

Have a lot of experience if field operation specifically with coiled tubing.

Ten years of production experience, maintenance, quality control, and provisory experience in cement production and management experience in lime production and quarry operations. Directly worked with maintenance repair for the plant. Degree Geologist

Mater and Doctoral degree holder in environmental science, Have 3 1/2 years of teaching experience. Worked in various environmental projects, authored a manual titled "A laboratory manual for water and wastewater analysis. Specialized in air and water pollution, EIA, Toxicology, EMS, Energy.

EXPERIENCE IN INTERNATIONAL TENDERING OF POWER TRANSMISSION PROJECTS

Summary of Relevant Experience: Management career is based on sixteen (16) years experience developed while in long term service with world class engineering and construction organizations.

OBJECTIVE To obtain a position with a progressive construction / development firm in which I will utilize my construction management and business skills

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

Environmental Assessment and Management

Prepared weekly and monthly schedules and cost reports preparation and submission to Client and in house management• Monitored of the cost & Progress on weekly basis. Invoiced to Client on monthly basis for the project.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

A keen team player with more than 15 years experience in Project Document Management, solid background in IT support, accounts, project administration, Project co-ordinator, quality control co-ordination and project analysis. Expert in Documentum.

10 years working experience in the field of QA/QC Inspection, Project Management, Field Engineering, Construction, Fabrication, Maintenance and Preservation of High-rise Buildings, Paper Recycling Plant, Oil & Gas Petrochemical Plant to Semiconductor/Wafer Technology Plant.

Production Operations Chief in an international oil company with strong experience in artificial lift equipment design and diagnostic, workover rig supervision, production follow-up, costs and investment control, as well as field crews supervision.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Over 10 years of environmental experience with same company! I can provide the following; • Phase I and Phase II Site Assessments • Asbestos inspections • Groundwater studies • Environmental assessment worksheets • Mineral analysis • Hazardous waste compliance audits

Over six years(8) years experience in ammonia plant and field of Oil & Gas Production Operation, PetroChina International Jabung Ltd. Responsible for the day to day planning and safe execution of routine planned to ensure safe and efficient, Bring On Line and Shut In Production, start-up and shutdow

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

License and experience geologist in the fields of mining and urban geology

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 [ 179 ] 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out