Resume - To secure a challenging position in the areas of Geographic Informatio...

Misco Jobs

Resume #2787

CONTACT INFORMATION:
View contact information...

PERSONAL
Date of Birth: 13th March 1969
Nationality: Indian
Marital Status: Married

OBJECTIVE

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

EDUCATION

M.Tech (Applied Geophysics) Post Graduate October 1992

Indian Institute of Technology (IIT), Roorkee/University of Roorkee at Roorkee (India)
q First Division q Carried out the following major projects for the M.Tech Program:
q Extensive research was carried out on the topic of "Analysis of micro earthquake data from the Shillong massif". Micro earthquake data were collected and analyzed and possible stress configuration using focal mechanism was also carried out. An effort was also made to investigate several distinctive features based on the Bouger -anomaly map of the area q A special problem was carried out for a period of six months on the topic of "Analysis of Geomagnetic Depth Sounding (GDS) Data from Main Central Thrust (MCT) Area" The purpose of research was to delineate the metallic mineral deposits on the basis of induction arrow pattern observed. An algorithm was also made for determining the position of induction arrows.
q Seminars Delivered at IIT, Roorkee/University of Roorkee:
* The Interpretation of very low frequency electromagnetic (VLFEM) data using tilt angle measurement technique.
* The effect of topography on resistivity profiling surveys

Bachelor of Science Graduate July 1988

D.B.S. College, Dehra Dun, H.N.B.Garhwal University, Garhwal (Uttar Pradesh), India q Second Division

Intermediate (Physics, Chemistry, Mathematics, Biology, English) July 1986

Scholars Home, 153, Rajpur Road, Dehra Dun, India q Ist Division

WORK EXPERIENCE

Principal Civil Hydrographic Officer 26th June 2000 ----Present

(O-i-C Electronic Navigational Chart (ENC) Division
(O-i-C Photogrammetry & Remote Sensing Division)
NHO (ISO 9002 Holding Organization), Dehra Dun, India.

q As Officer-in-Charge of Electronic Navigational Chart (ENC) Division the job involves a) Project Planning, execution and implementation and assigning jobs to the junior Chart production staff and solving their day-to-day technical problems related to S-57.
b) Supervision of Electronic Navigational Charts for the production and quality control of charts as per S-57 Standards c) Supervision of tasks such as Digitising raster charts with the objective of creating S57 charts, Digitising, Processing & Coding and Quality control.
d) Processing and Coding of previously digitised charts, with the objective of creating S57 charts e) Quality Control on S-57 charts using Validation software's approved by IC-ENC.
f) Management of Digital Data Transfer, Encryption, Security and Marketing of digital products. Preparation and keeping up-to-date- all digital operating procedures for the preparation of ENCs. Liasioning with UKHO for IC-ENC and RENC Asia.
g) Liaison for procurement of ENC S/W & Validation S/W.
h) Technical assistance in Bilateral Arrangement – Area 'J' (ENC).
i) Study IHO Technical matters & prepare brief on topics of Work Group 'A' - S-57, CHRIS, ENC, RENC, ECDIS, WEND, ENC Marketing, TSMAD.
j) Assist in integration of Digital Data for Geographic information System (GIS).
k) Updation/Maintainace of Digital Charts Databases.
l) Providing Geophysical and Geotechnical support as and when needed.

q As Officer-in-Charge of Photogrammetric & Remote Sensing Division job involves a) Project planning, execution and implementation related to Remote Sensing and Digital Photogrammetry.
b) Providing Photogrammetric & Remote Sensing support in Nautical Charting.
c) Project assignment to junior team members and solving their technical problems d) Review of Indented and obtained Digital data from various sensors/organizations, Georeferencing Satellite Imageries/Aerial Photographs, creating Stereo product, Extract 3D/2D features vectorization of details, Generation of Orthophotos, DTMs, DEMs and Fly throughs e) Providing Photogrammetry and Remote Sensing support in Nautical Charting & Coastal Zone Management.
f) Besides this working presently on UAV project for Indian Navy.

q Member of Technical Evaluation Committee for up gradation/purchase of Digital
Photogrammetry System.
q Member for Formulation of Procedures for collection /Processing and Retrieval of Gravity and Magnetic Data from Ships at Sea.
q Member Technical Evaluation Committee for Project Field Survey Database-FSBD (HIP/SYS)

PROJECTS EXECUTED

Carried out following major projects for Indian Hydrographic Office q Goa Harbour Nautical Chart updation using IRS Satellite Imagery, feature digitization, created orthophoto, Contour generation, DTM generation, Fly throughs etc.
q Kawar Harbour Chart updation for Naval Project SeaBird using IRS Satellite Imagery, feature digitization, created orthophoto, Contour generation, DTM generation, Fly throughs etc. Software:- ERDAS IMAGINE ver 8.5 and its allied modules.
Hardware: -Pentium IV, HP x2100 workstation.
q Regular updation of Navigational Charts using IRS, RadarSat, IKONOS data.
Projects in Hand q Integration of sub sea DEM and Topographic DEM for UAV and UWV.
q Land/Marine GIS Development of Mumbai Port using GeoMedia Pro 5.0.

Civil Hydrographic officer 23rd September1998 - 25June 2000

1st O-i-C Photogrammetry & Remote Sensing Division
2nd Officer in Charge of Compilation Division
NHO (ISO 9002 Holding Organization), Dehradun India

During the period a 12 months systematic departmental training attended and consequently gained experience in Nautical Charts Compilations & Automated Cartography System (ACS). Training was also imparted for digitization of nautical Charts for production of Electronic Navigational Charts (ENCs) and other related aspects of Nautical Cartography. The job function also entailed supervising compilations, fair drawings, reprinting and ocean dynamics data analysis. As Officer-in-Charge of Photogrammetric & Remote Sensing Division job involved delineation of coastline from aerial photogrammetry and Satellite Imageries.

Technical Assistant (Geophysics) 6th October 1993 - 22nd September 1998

Ground Water Department, Ajmer (Rajasthan) India.
q The Job Involved conducting Geophysical Surveys (Electrical & Electromagnetic) for determining the sub-surface structure for ground water basins, estimation of salinity, discharge zones location, mapping promising ground water zones in hard rocks like thick saturated weathered rocks, fractures, fissures, solution cavities etc. Electrical surveys were also carried out to delineate sites for rural & urban water supply schemes of World Bank and its assisted projects like ADP (Agriculture Development Programmes) Site selection for Exploratory Tube wells /Piezometers /open well and artificial recharge sites selection were also a part of the job.
q The Job also involved sometime conducting Conventional Electrical Logging like SP,
SPR & other logging such as GAMMA, NETRON, CALIPER, FLUID, CONDUCTIVITY and TEMPERATURE logging using WELL - MAC logging unit of MALA GEOSCIENCES
q Seismic Refraction surveys, processing and interpretation were also sometime carried out as and when required for exploration of ground water

GIS/REMOTE SENSING/DIGITAL PHOTOGRAMMETRY TRAINING

1.Completed training in" Digital Chart and ENC Production on CARIS software" provided by M/s IIC Technologies Pvt Ltd. Hyderabad, which are CARIS (Canada) Strategic Alliance and Authorized Dealer in India.

2Completed training on "Application of Satellite Data for Coastal Zone Management" at Space Application Center (ISRO), Ahmedabad

3.Completed" Digital Photogrammetry" training at IIRS Dehradun

4.Completed "Digital Image Processing" training at NHO provided by M/s ERDAS INDIA Pvt Ltd. Hyderabad, which are ERDAS (USA) Authorized Dealer in India.

5. Completed training in" CARIS GIS & CARIS LOTS software" for delineating various maritime limits under UNCLOS for claiming EEZ provided by M/s IIC Technologies Pvt Ltd. Hyderabad, which are CARIS (Canada) Strategic Alliance and Authorized Dealer in India.

SKILLS PROFILE

Languages Microsoft Technologies
MS Visual Basic (Working Knowledge)

Others
C, C++, HTML, FORTRAN(Working Knowledge)
Geographical
Information System GeoMedia Pro 5.0, Arc View, MGE, Micostation SE, Micro station 95 with allied modules of M/s Intergraph/Bentley, USA, Mapping office I/RAS B, I/RAS C, I/GEOVEC, Image Analyst

Image Processing ERDAS IMAGINE (all modules), ER-Mapper, Image Analyst

Digital
Photogrammetry OrthoBase, Stereo Analyst, SOCET SET

Marine GIS CARIS with allied modules of M/s Universal Systems, Canada, SAMI, EDITOR, DKART inspector, ECVIEW & 7C's, CARIS GIS, CARIS LOTS

Data Bases Tools MS Access

Web Servers NetScape

Operating Systems Win/NT/2000/98,UNIX and DOS

Operation Areas Geographic Information Systems, Electronic Navigational Charts, Automated Mapping, Remote Sensing, Photogrammetry, Nautical Cartography and Geophysics.

Office Automation MS-Office (Word, Excel, Access, PowerPoint).

Other Software's Ato, Sector, Surfer & Grapher

FIELD TRAINING EXPERIENCES

Geophysical Training's (Field) August 1992- September 1998
q Attended three weeks geological training held by the Department of Earth Sciences,
University of Roorkee, Roorkee, in the Rajasthan State of India.
q Attended three weeks geophysical training held by the Department of Earth Sciences,
University of Roorkee, Roorkee, in the foothills of Siwaliks Mountains.
q Attended one week training program organized by the O/o Chief Engineer, Ground
Water Dept. Jodhpur (Raj.) on the field data collection, processing & interpretation using WADI electromagnetic instrument.

MAJOR COURSES TAKEN

University of Roorkee at Rookee, India q Geodynamics, Geology, Geophysical Fields & Waves, Seismology, Electrical
Prospecting, Gravity and Magnetic Prospecting, Mathematical methods in Geophysics, Electromagnetic Prospecting, Seismic Prospecting, Well Logging, Signal Processing, Integrated Geoexploration a systems Approach (IGASA), Engineering Geosciences (Rock & Soil Mechanics and Geotechnical Investigations), Advance Techniques in Geophysical Interpretation Hydrology & Hydrometry.
D.B.S. College, Dehra Dun, H.N.B.Garhwal University, Garhwal (Uttar Pradesh), India q Physics, Chemistry & Mathematics.

EXTRA-CURRICULAR ACTIVITIES AND HONORS, AWARDS & ACHIEVEMENTS

NHO, Dehra Dun, India.

q Presented paper titled "Integrated Marine GIS Approach in Navigation Charting" at
Map India 2003, an International Conference from 28th Jan –31st Jan 03 at New Delhi.
q Presented paper titled "COASTAL MAPPING AND MARINE CHARTS" at XXII INCA
International Congress at Ahemdabad from 30th Oct –1st Nov 02.
q Presented a paper titled "SIGNIFICANCE OF LASER AIRBORNE TECHNIQUE FOR
SHALLOW BATHYMETRY CHARTING" at XXI Indian National Cartographic Association at Hyderabad and at " DEHRADUN (UTTARANCHAL) THE NATIONAL REMOTE SENSING HUB" at Defence Electronic Application Laboratory (DEAL), Ministry of Defence, Govt of India.
q Delivered a lecture titled "Bathymetric Charting in Coastal Waters of India and its
Importance" at Indian Institute of Remote Sensing for their course on "Geo-informatics in Coastal Management"
q Presented Paper at the XX INCA International Congress, Dehradun, held from 28th Feb to 2nd Mar 2001, titled "High Resolution Satellite Data and its Application in Nautical Charting".
q Member of Indian National Cartographic Association (INCA). An organization established to foster Cartographic Research, to promote interaction within an Inter-Disciplinary Frame, to co-operate with international organizations having similar objectives and to develop a sense of National responsibility and professional efficiency.
q Held the post of Joint Organizing Secretary of the XIXth INCA International Congress
(26th October - 29th October, 1999) held at Goa, India.
q Held post of Member Technical Programme Sub-Committee & Member Delegates
Materials Sub-Committee.
q Member of National Hydrographic Office Recreational Club.
q Likely to become Member of Indian Society of Remote Sensing & Indian Geophysical
Union.
q Attended Various National and International Seminar on Mapping/GIS/Remote
Sensing/Photogrammetry and Geophysics.

University of Roorkee at Rookee, India q Received Rupees 1,500/= as Merit Scholarship during M.Tech Course.
q Member of Rookee University Students Association.
q Participated in singing competition at University level during Bhawan Days.
q Received Certificate of Merit for Best Player of Table Tennis Team.
D.B.S. College, Dehra Dun, Garhwal University, Srinagar (Uttar Pradesh), India q Stood in the top 10% of entire College in National Graduate Physics Examination conducted by Indian Association of Physics Teachers, Dehra Dun, India.
q Participated in singing competition at College level during Union Weekdays.

MISCELLANEOUS

q Dedicated, ambitious and have a strong work ethic, Effective team member;
Responsible; Professional and Productive.
q Section Officer controlling and looking after the production from about 6 employees.
q Bilingual and Multicultural: Fluent in English (IELTS- Speaking 7.0) and Hindi.
q Interests include listening light music, and surfing the Net

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5751 to 5800 of 15509)

Go to Search Parameters...

Brief Description

Quantitative Interpretation for Reservoir Characterization

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

Past 20 years I been working as Document Controller, at present working for Saipem UK ltd as Senior Document Controller.

Over 30 years of Management/Supervisory experience in drilling and production of oil, gas and geothermal. With a total of 35 years of experience:

•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

underground driller operater

EPC Project Contracts 'Interface/Liaison' Administration Specialist

I am interested in exploring the possibility of Employment through your Organization. My background includes substantial Experience of 5 Years as Mud Engineer in MB Petroleum Services LLC - Muscat, Oman, Saudi Arabia, Mozambique and India.

I, Rajesh Nandy, is having Diploma in Mechanical Engineering. I have total 09 years hands on experience in gas engine based power plant. I was started my career as Service Engineer in Gas Engine. Now my present role is Deputy Service Manager in abroad under one MNC company. I have an all sort of fie

Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.

I am a Health, Safety and Environmental Engineer presently working for EEI Nouvelle Caledonie/INCO Australia Management Pty, Ltd here in New Caledonia. I have been working as Safety Engineer for more than 5 years. my contract here will end by end of December and i'm looking now for my next job.

Petroleum Landman

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Jean-Francois Zaky is a construction manager in a well-established construction company in Houston, Texas. Mr. Zaky has more than 11 years experience in the construction business. He is a U.S. citizen born in Houston, Texas. Mr. Zaky speaks fluent Arabic language.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

Degreed Construction Superintendent for both Commercial and Residential projects with over 15 years of experience.

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

A Management position in an environment that offers quality-working opportunity in the fields of Photogrammetric Engineering & GIS and , in return, invest my long-term experiences, interpersonal skills, talents and abilities.

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Electric Technical Officer (ETO)

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

Heavy Equipment Operator

Bilinhual: Spanish / English, Computer Literate, International Experience.

Senior Civil / Structural Designer

Well engineering, daily drilling operations supervision, services coordinator

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Slick Line Expert.

Ability to design & detail automation for DCS systems and other interfaces.

SENIOR PLANT OPERATOR

I possess technical skills which includes the use of data anaylsis softwares, microsoft office applications and excellent communication and interpersonal skills. For that of my qualifications, i had BSc in geology and also MSc in Applied Marine Geoscience

Smart Plant Administrator,-Administration, spec,OracleDatabase, Workshair, Project Execution

I grew up in the United Kingdom and educated in Europe and the Mediterranean, I am fluent in English written and spoken and I have the ability to learn languages fast, and have an open mind to learn new programs and system, I am loyal and honest and hard working and love to work under a fast pace.

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Civil Engineer specialized on Structures working towards Masters Degree.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 [ 116 ] 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out