Resume - To utilize my broad skills and experience in offshore and onshore oil and gas in...

Misco Jobs

Resume #28515

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

ELECTRICIAN
July 2004 to present
MODEC Management Services Pte Ltd.
MV 9 Cuulong FPSO, Vung Tau, SR Vietnam
Client: CLJOC

* Responsible for the control and safety of all electrical equipment on the installation.
* Responsible for the isolations, issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of medium voltage (4160 V) and low voltage (450 V) electrical equipment, testing/fault finding on high and low voltage circuits.
* Operate Gas Turbine Generators (SOLAR) for power generations on the installation. Synchronization of power supplies. Performs maintenance, troubleshooting and repair.
* Do planned maintenance and unplanned maintenance on all electrical equipments on the FPSO installation and Well Head Platform. Responsible on AMOS M & P for electrical and instrument issues.
* Maintains a close check on electrical and instrumentation spares, consumables, tools and instruments and order as required.
* Perform maintenance, repair and troubleshooting on Fire and Gas System and Emergency Shutdown System.
* Assist in the commissioning of the electrical and instrument equipments while ship is still on dry dock in South Korea.
* Responsible for the maintenance and repair of Boiler Management System, Inert Gas System, Alarms and Controls on the installation.
* Responsible for the maintenance, repairs and troubleshooting of controls for Sea Water Injection Pumps, Fuel Gas Heaters and Compressors, Coolers, Motors, and Blowers.
* Workshop assessor for Competency Base Training Assessment.

ELECTRICAL SUPERVISOR (Unit Electrical Authority)
January 2002 to May 2004

Electrical Instrument Technician
August 1998 to January 2002
Rang Dong 1 FPSO, Vung Tau, SR Vietnam
Client: JVPC
SBM-TII/DML/HAMMONIA

Electrical Supervisor
FPSO II, Brazil
Client: Petrobras
May 1997 to June 1998
SBM-TII/DML/HAMMONIA

Electrical Instrument Technician
FPSO VI, Nigeria
Client: Ashland
February 1996 to March 1997
SBM-TII/DML/HAMMONIA

Instrument Supervisor
FPSO II, PHILIPPINES
Client: Alcorn
May 1992 to December 1995
SBM-TII/DML/HAMMONIA

* Responsible for the control and safety of all electrical equipment on the installation. Issue and cancel electrical permits and responsible for all safety matters of electrical safety.
* Carry out switching including isolations and de-isolations of all low voltage electrical equipment, testing/fault finding on low voltage circuits.
* Operate electrical equipment on low voltage generation system. Synchronization of power supplies.
* Do planned and unplanned maintenance on all electrical equipment on the installation. Responsible on AMOS M & P for electrical and instrument issues.
* Maintain a close check on all electrical and instrumentation spares, consumables, tools and instruments and inform Maintenance Superintendent of requirements.
* Performs maintenance, repair and troubleshooting of Boiler Management system, Inert Gas system, and Alarms and Controls on the installation.
* Responsible for the maintenance of all electrical and instrumentation equipments used in process and utility plant.

INSTRUMENT TECHNICIAN
Saudi Aramco (formerly Arabian American Oil Co.)
Uthmaniyah NGL Plant (Gas Refinery)
Dharan, saudi Arabia
October 1980 to September 1983 and July 1984 to August 1991

* Performs maintenance, repairs, installation and commissioning of all electronics, digital, pneumatics, and electro-mechanical instruments used in Gas Refinery operations.
* Performs maintenance, repairs, installation and commissioning, of all on-stream gas and liquid analyzers such as gas chromatographs, moisture, colour, oxygen, pH, conductivity, H2S and other hydrocarbon analyzers.
* Prepares new or modify installation of H2S and LEL monitors, recorders and indicators, and test run for acceptance.
* Ensure that spares and materials required for the continuation of the job, and order spares and materials as required.
* Acts as a team leader to a group of instrument technicians and repairmen, and provide technical guidance and work direction to Saudi Arabs Instrument trainees.

INSTRUMENTMAN
May 1977 to September 1980
Resins Incorporated (Chemical Plant)
Pasig City, Philippines

* Repairs, troubleshoots, and maintains all types of process control instrumentats use in Chemical Plant.
* Repairs, troubleshoots, and maintains all electronics, pneumatic and electro-pneumatics used in Power Generation Plant.
* Repairs, troubleshoot and maintains all instruments used in Utilities and Boilers, laboratory and control room.
* Perform installations, commissioning and construction works of all additional process instruments.
* Performs any other job-related task.
* Acts as team leader to assigned crew.

EDUCATION:
Diploma on ELECTRONICS ENGINEERING
Cleveland Institute of Electronics, Cleveland, Ohio, USA

Diploma on Trade Technical Education, Specialization: APPLIED ELECTRONICS
Marikina School of Arts and Trades, Marikina City, Philippines

B.S. in ELECTRONICS & COMMUNICATIONS ENGINEERING
UNDERGRADUATE, University of the East, Manila City, Philippines

SPECIAL TRAINING:
* Basic PLC Course
January 31 to February 17 2005, Meralco Foundation Incorporated, Philippines
* Hazardous Area Training
November 2002, JVPC, Vung Tau, Vietnam
* Hazardous Area Training
February 2003, SBM Marine Services (Thailand) Limited, Bangkok, Thailand
* Fundamentals of Process Control and Instrumentation
April 1978 to April 1979, Resins Incorporated, Philippines
* Bentley Nevada Vibration Monitoring Course
May 1983, Arabian American Oil company, Saudi Arabia
* Air Demand Analyzers
March 1988, Saudi Aramco, Saudi Arabia
* Micon Controllers
November 1990, Saudi Aramco, Saudi Arabia
* General Tanker Familiarization
January 1999, Consolidated Training Center, Philippines
* Shore Based Firefighting
January 1999, Consolidated Training Center, Philippines
* Basic Safety Training
January 2003, Consolidated Training Center, Philippines
* Helicopter Underwater Escape Training
April 2005, PetroVietnam Manpower Training College, Vung Tau, S.R. Vietnam
* HSC Upgrading Course (Microsoft Excel)
June 1999, Fame Maritime Foundation, Philippines

ADDITIONAL INFORMATION:
Holder of Registered Master Electrician License # 25020 issued in Manila City, Philippines on October 2001.

Holder of Certificate of Competency for ICSTCW for Seafarers issued in Manila City, Philippines on February 2002.

Holder of Philippine Passport # JJ 923831, issued in Manila City, Philippines with expiration date of 21 June, 2006.

Holder of Philippine Seaman Service Record Book # B003125, issue in Manila, Philippines with expiration date of March 2009.

Holder of Liberian Seaman Identification and Record Book # 107501, issued in Reston, Virginia with an expiration date of 14 May, 2007.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5901 to 5950 of 15477)

Go to Search Parameters...

Brief Description

Qualification : M.Sc. Geoinformatics , Skills: AutoCAD2008,ESRI’s Arc View 3.2a,ESRI’s Arc GIS-Arc Map 9.2,,ERDAS Imagine 9.1,ENVI ( Environmental Visualizing Image )

Graduate Civil Engineer from a reputed institution of India having experience in Quantity Survey & Contracts in projects across the Gulf, currently working with one of the premier infrastructure companies of the Middle East, seeking suitable long term career opportunities.

Mechanic Field Tech: Mechanical, Hydraulic,Electrical,Pneumatics, Welding

Electrical, planning and IT

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

20 years overseas contracting, Mining and Construction

Experienced in design of electrical, instrumentation, and control systems. Experienced in Intools-SPI, heat trace, SKM, PLC, and DCS, Delta V design

I am a professional engineer with over five years of experience in Land Development. I have a strong background in grading, drainage, water, wastewater, and paving design. My project management skills include contract writing, work planning, budget management, invoicing, and A/R collections.

Through 5 years of Collage 5 years on on site experience i have a broad base to develop my careew with the right company.

Geologist at well site oredo 10 and 11 (Drilling rig)

An MSc Holder in Environmental Practice; Pollution Management with trainings in oil spills from OSRL/EARL Limited UK, and health and safety course from Allied healthcare UK. Have experience in environmental consulting and researching. IT literate, able to use ArcGIS, work on own initiative or as par

team player, I can work safely even with minimal supervision. proficient in in underground and surface drilling.during my last employment i was awarded with safety performance recognation.

I am a highly skilled geologist looking to increase my responsibilities and take on new challenges. By experiencing different working environments from the Australian Gold fields to the African Copper belt, it has enabled me to develop as a rounded geologist that can contribute to your team.

Electrical/Automation/Controls Enginer

Mechanical Engineer with Masters (M.E) in CAD and with One Year of Static Equipment Design experience in FACT ENGINEERING AND DESIGN ORGANIZATION (FEDO), India and one year and four months experience in Inspection of Storage Tanks and Pressure Vessels.

Nebosh holder, driving licence-uae, hard worker, professional touch, good team player, work under risky conditions

B.E., Mechanical Engineering with an Aggregate of 70.02%-(2000-2004)

Registered Civil Engineer with 5 yrs experience as quantity surveyor in contruction industry

HR Administration / Recruitment / Orientation

I am working with the group of KBR as Document Controller using IPMS system. Presently working in the project of EGTL project in Nigeria.

BE chemical + MBA marekting with 2 years ex in industrial marketing

Nuclear Engineer in process reactor specialist. Have ISO 9001 and other certification.

Mining engineer with hands on supervisory experience in mining development and production. He has worked internationally and is currently a mine planning engineer at Rosebery Mine, Tasmania. 34, married and has two children of 2 years and 6 months old. Fluent in Russian and English.

Certified Internal Auditor, international auditor

Experience in Middle East

Chief elecrician !!!

Self motivated mining engineer with experience in remote northern locations in Canada and Alaska. Experience includes mine operations and reclamation, short and long range planning, geotechnical design, and permafrost design.

I am Process Operator with more than 8 years experience in Petroluem, Fertilizers, Petrochemical include Commissioning Experience with Multinational Engineering Companies.

Talented ¡¥Senior Corrosion Engineering & Control Professional, Specialized in Cathodic Protection Technology Services¡¦ with extensive background in Project Engineering, Construction Management, Maintenance Management & Specialized Surveys at Oil, Gas, Petrochemicals, Power & Water S

Results-driven professional with 20 years experience in patient research studies, data analysis, medical terminology and management. Consistently successful interactions with all staff levels while providing excellent customer service and flexibility using highly effective verbal and written communi

Attorney specializing in Land and Oil/Gas Law

30 years in tough Engineering & Construction Industries

Highly experienced well qualified motivated and dedicated HSE professional with excellent man management skills, vast experience working with multi national workforce and 20+ years in oil & gas, high profile civils / construction projects, PMC, training, onshore / offshore, LNG.

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Medic wityh 14 years experience

Bachelors degree in Civil Engineering with more than 15 years experience in project engineering, construction and project controls with international exposure in oil and gas sector and other areas which encompasses the functions of planning, budgeting, scheduling, schedule controlling.

Execute all structural works, finishing works. Aware of survey works. Using computer software proffessionally

My skills:Experienced Project Document Control Supervisor working on large-scale on-shore/off-shore projects past 8years. Experienced in handling design/vendor packages, expediting of subcontractor’s package, Document Control, scheduling, progress reporting, good communication skills

Operations Manager, Barge Master, Barge Captain, Master Mariner, Rigging and Scaffolding Supervisor, Crane Operator.

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

20 plus years of experience in all aspects of the electrical field, last 17 in Industrial work.

Senior Contracts Manager 25+ yrs experience in Power Plants, Airports, Water Treatment Plants, major civils, UK, Malaysia, Pakistan, Gibraltar. Contracts Management from inception to completion (EPC + Supplier)with broad knowledge of planning, cost control and project management.

Planning/Scheduling

An adaptable Materials Controller with specialist strengths gained onshore, offshore and overseas. Supervisory and hands-on experience, with the ability to communicate at all levels in a fast moving environment. Experience in Drilling, Construction, Maintenance and Production.

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Application for Offshore Drilling Rig Mechanic

Experienced Cad Manager/Project Coordinator. Multi Discipline design teams. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

Over twenty-seven years of domestic and international experience with a broad range of pipeline, oil and gas, and associated facilities projects.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 [ 119 ] 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out