Resume - I have varied experience earned through honest means in Chemical, Oil & Gas, Pet...

Misco Jobs

Resume #2867

CONTACT INFORMATION:
View contact information...

Dear Sir/Madam,

It is my pleasure to introduce myself to you as an Electrical/Instrumentation/Controls Engineer.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical, Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction. I have played very important roles in many successful projects, some of them completed ahead of time, in a wide gamut of areas both in India and abroad and am continuing to do my very best in Singapore. After my graduation from the most accredited University in India and serving many reputed Government, Public and Private Limited Companies in India for 9 Years including my assignments outside India, I migrated to Singapore in July 1997.I have since then been serving the best Private and the topmost Enterprise 50 Company until October 2001, in Singapore. After a brief stint of 2 months in another reputed company, I am now a Senior Electrical & Instrumentation Project Engineer for a top Government Linked Company in Singapore.

I am delighted to see vacancies in your Company and would like to offer my candidature since your requirements match my profile. As requested, I have enclosed my resume for your kind perusal.

Education: 1984 to 1988

First Class 4 Years Bachelors Degree in Electronics & Communication Engineering from the University of Madras, India

Professional Membership & Achievements:

1. Member, Instrument & Control Society, Singapore.
2. Member, IEEE,USA.
3. Confirmed and promoted earlier with greater responsibilities due to excellent demonstration of work ethics, knowledge & attitude by all Employers in Singapore and most of them in India.
4. Selected & Deputed by the Employer in India in 1996 & 1997 from a special brand of skilled Engineers to Netherlands, United Kingdom & Philippines for Inspection & Factory Acceptance Tests of Switchgear room, Training/Orientation of Erection/Testing activities & Inspection of Living Quarters Module respectively for some prestigious Oil & Gas projects.
5. SOC [ Safety Orientation Course ] Certificate Holder
6. Have played key roles in 4 Oil & Gas, 1 Water treatment (Sludge treatment works), 1 Petrochemical (Training centre) projects which were completed, some of them ahead of scheduled completion.
7. Acquired good knowledge in all requirements of Electrical/Instrumentation/Controls works in Singapore including Codes and Standards.

Targets for the next 5 Years:

1. To pursue Postgraduate/Doctorate programmes in Engineering/Management studies.
2. To apply for Professional Engineers (Electrical), Singapore Membership
3. To become a Chartered Engineer
4. To independently manage projects in the capacity of Project Manager.

Expected Salary: Negotiable

Professional /Working Experience - Summary:

Srl No Employer Designation Period Salary per month excluding perks & Bonus
1 SembCorp Industries, Singapore [ Present Employer ]{Confidential} Senior Project Engineer [ Manager Grade ] 18/12/2001 till date S$3500/-
2 Plant Engineering & Construction Pte Ltd, Singapore Senior Project Engineer 1/11/2001 to 14/12/2001 S$3200/-
3 Salcon Group of Companies, Singapore Project /Senior Project Engineer 21/7/1997 to 26/10/2001 S$3040/-
4 Larsen & Toubro Ltd, India Project /Senior Project Engineer/Senior Project Executive 17/8/1992 to 14/7/1997 Indian Rupees
5 Hindustan Organics Ltd, India [ A Government of India Enterprise ] Instrument Foreman [ Engineer Grade ] 12/11/1990 to 14/8/1992 Indian Rupees
6 Uptron India Ltd, India [ A U.P. State Government Undertaking ] Control Systems Engineer 17/2/1990 to 7/11/1990 Indian Rupees
7 J.K.Synthetics Ltd, India Assistant Engineer 17/10/1988 to 14/2/1990 Indian Rupees

Professional /Working Experience - Details:

A] Senior Project Engineer ( Manager Grade ), SembCorp Industries, Singapore
{Confidential}

1. Completely responsible for Electrical & Instrumentation/Control portion for Government & other Clients Projects / Tenders in the areas of Petrochemical/Chemical/Oil & Gas/Transportation/Power Plants, Singapore and the SE region.
2. The present Employer is a reputed and leading Design/Engineering/Consulting/EPC conglomerate serving many Government /Multi-national Clients in Singapore on EPC basis and have a formidable International presence with strategic mergers, acquisitions and Joint ventures.
3. Completely responsible and a Lead Engineer for a Petrochemical Project which includes Design/Engineering of Safe guarding systems, Process Distributed Control Systems, Field Instruments for Pressure, Flow, Level, Temperature, Analytical applications. Scope of work includes Design / Engineering complex control systems for Vendor packages such as Compressors, Furnace, Flare, Various Pumps, Hydraulic systems, CCTV, etc and Fire Gas Detection Systems. Very good knowledge obtained in all kinds of Instrumentation & Control systems.

4. Project executed: Client - Nanyang Polytechnic, Ministry of Education, Singapore, Scheme: Chemical Process Technology Centre, Jurong Island, Singapore.

B] Senior Project Engineer (Engineering Coordinator ), Plant Engineering
& Construction Pte Ltd, Singapore:

1. Responsibities included setting up the E&I Engineering Division in the existing Engineering Department with Mechanical, Piping, Structural Engineering capabilities and to execute projects.
2. The Employer is a reputed group serving many Multinational Clients such as Shell, Exxon-Mobil, British Petroleum, etc in the Refinery & Petrochemical industries on EPC basis.
3. Project executed: Client - China National Petroleum Corporation, China. Scheme: Metering Skids Projects

C] Senior Project Engineer, Salcon Group of Companies,Singapore

1. Have been working in the capacity of Assistant Manager (Projects) doing complete M&E Design/Engineering & Coordination.
2. The Employer was the topmost Enterprise 50 Company for 2 years continuously, an accolade created and awarded for Singapore's best Private Ltd companies by the EDB. Also has regional presence and have carved a niche in Water treatment areas.
3. Completely responsible for Detailed Design, Engineering, Procurement, Installation, Testing & Commissioning of Electrical, Instrumentation & Control Systems such as High Voltage Switchboards, Low Voltage Switchboards, Motor Control Centres, Variable Speed Drives, Power Transformers, Lighting Systems, Emergency Diesel Generator Systems, Supervisory Control and Data Acquisition (SCADA ) Systems ( which includes PLC based Local Control Panels, Hardened MMIs, Servers & Operation Stations, Field Mounted Instruments/ Valves & others ), Building Automation Systems (which includes complete Fire Protection System & ACMV System), CCTV System, Telephone & Intercom System, Different types of Field Instruments like Pressure, Flow, Temperature, Level Instruments, Actuators, etc. and associated items like PVC/FR/Fibre Optic Power/Control/Signal Cables, Trays, Glands, etc.,
4. Responsibilities included Scrutinizing / Placing /Managing Contracts and Orders with a vast range of Supplier/Contractors. Assist in Bidding of new projects, Develop Complete Project Schedule using Planning packages and track, monitor project progress. Develop Method statements for all Electrical & Instrumentation works, Training of Client for the whole project, EOT claims saving revenue for the Employer. Assist in Bidding for new projects
5. Project executed: Client - PUB, Water Department, Singapore, Scheme: Sludge Treatment works at Chestnut Avenue & Choa Chu Kang Waterworks

D] Senior Project Executive, Larsen & Toubro Limited, India

1. Joined the Company as an Engineer and promoted earlier to Senior Engineer and Senior Project Executive levels.
2. The Employer is considered the best Public Limited Company and an Indian Multinational Organisation for its reputation, Quality of work, commitment and strict adherence to dates of completion of projects and are into many areas of works spread through-out the length and breadth, nook and corner of India. Have innumerable awards to its credit and other companies try to emulate this Employer's style of work.
3. Execute Electrical & Instrumentation portion of fast track Turnkey Oil & Gas Projects. Schedule Erection & Commissioning activities for Electrical & Instrumentation areas including Calibration. Gained Hands-on experience in typical Offshore systems like Well/Fire Shutdown Panels, Kill/Acid Panels, Cathodic Protection Systems, Gas Detection Systems, Normal/Emergency Lighting, Pressure Safety Valves, Shutdown Valves, Solar Electric Power System, Navigational Aids System, Low Voltage Switchboards, Motor Control Centers, Turbine Generators, Diesel Generators, Fire Water pumps, Lighting Fixtures, Junction Boxes, Area Classification etc,.. Do Erection & Commissioning of Electrical & Instrumentation activities in the Capacity of Site-In-Charge within the Project Contractual dates. Have successfully completed 4 ( 2 - Completed in time, 2 - Ahead of Scheduled Completion date) such Offshore Well/Production/Process Platform Projects which also involved Erection, Testing and Commissioning activities Offshore.
4. Responsibilities included Approving, monitoring & expediting progress in preparation of Engineering Layout Drawings & documents such as Instrument Hook-ups, Single Line Diagram, Loop schematics, Cable/Tube Schedules, Bill of Materials, Instrument Data Sheets prepared by the Engineering Consultant of the Project, Scrutinising /Placing /Managing Contracts and Orders with a vast range of Supplier/Contractors. Assist in Bidding for new projects.
5. Projects executed: Clients - Oil & Natural Gas Corporation (ONGC), India & Enron Oil & Gas Corporation, Schemes: I-MNTW Well Platforms, S1-Sand Well Platforms, Tapti Process/Production Platform

E] Instrument Foreman [Engineer Grade], Hindustan Organic Chemicals Limited (
A Government of India Enterprise ),India:

1. Responsible for Electronic Laboratory's activities i.e. servicing & troubleshooting of all Electronic Equipment in the Company such as Gas & Liquid Chromotographs, Spectrophotometers, Polarographs, Single Loop Controllers, Indicators etc,. Maintain Instrumentation Shifts of Formaldehyde, Nitrotoulene, Nitrobenzene, Pollution Control plants controlled by Distributed Control System. To upgrade, modernise plants from Pneumatic to Electronic systems. Very good experience gained in Control valves, Controllers, Primary sensing elements, etc,.

F] Control System Engineer, Uptron India Limited ( An Uttarpradesh State
Government Enterprise ), India

1. Responsible for Design / Engineer Turnkey Automation projects for Power & Mining Industries through Distributed Control Systems, Single Loop Controllers & other related Electronic Instruments. Responsibilities included were to Design, Procure, Inspect, Install, Erect & Commission Electrical & Instrumentation systems within the stipulated Project Schedule. Working knowledge gained in Distributed Control Systems.

G] Assistant Engineer, J.K.Synthetics Limited,India:

1. Responsible for Maintaining Instrumentation shifts independently of a Partially Oriented Yarn plant with a capacity of 90 Tons per shift, Do Preventive, Shutdown & day to day maintenance, Attend to Breakdowns, Malfunctioning, Troubleshooting of Electrical & Instrumentation systems such as Uninterrupted Power Supplies ( 400 Kva ),AC Drives ( 15 Kva to 240 Kva ), DC Drives, Single Loop Controllers, Indicators & Recorders. Working knowledge acquired in developing software for Inter-departmental use in dBase, Foxbase, 8085 Microprocessor Machine Language, Clipper & to attend Hardware failures of Personal computers & accessories.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5701 to 5750 of 15341)

Go to Search Parameters...

Brief Description

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

Past 20 years I been working as Document Controller, at present working for Saipem UK ltd as Senior Document Controller.

Over 30 years of Management/Supervisory experience in drilling and production of oil, gas and geothermal. With a total of 35 years of experience:

•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

underground driller operater

EPC Project Contracts 'Interface/Liaison' Administration Specialist

Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Jean-Francois Zaky is a construction manager in a well-established construction company in Houston, Texas. Mr. Zaky has more than 11 years experience in the construction business. He is a U.S. citizen born in Houston, Texas. Mr. Zaky speaks fluent Arabic language.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

Degreed Construction Superintendent for both Commercial and Residential projects with over 15 years of experience.

To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

A Management position in an environment that offers quality-working opportunity in the fields of Photogrammetric Engineering & GIS and , in return, invest my long-term experiences, interpersonal skills, talents and abilities.

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Electric Technical Officer (ETO)

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

Heavy Equipment Operator

Bilinhual: Spanish / English, Computer Literate, International Experience.

Senior Civil / Structural Designer

Well engineering, daily drilling operations supervision, services coordinator

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Slick Line Expert.

Ability to design & detail automation for DCS systems and other interfaces.

SENIOR PLANT OPERATOR

I possess technical skills which includes the use of data anaylsis softwares, microsoft office applications and excellent communication and interpersonal skills. For that of my qualifications, i had BSc in geology and also MSc in Applied Marine Geoscience

Smart Plant Administrator,-Administration, spec,OracleDatabase, Workshair, Project Execution

I grew up in the United Kingdom and educated in Europe and the Mediterranean, I am fluent in English written and spoken and I have the ability to learn languages fast, and have an open mind to learn new programs and system, I am loyal and honest and hard working and love to work under a fast pace.

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Civil Engineer specialized on Structures working towards Masters Degree.

Mechanical Engineer,University Politehnica Bucharest

Bachelor in mining engineering

Technical and Application Engineering Support for the new concepts being introduced and promoted.

I have had both mechanical and condition monitoring experiences which will make me a very competitive candidate to fulfill condition monitoring and/or mechanical position. I have had ISO Cat-II vibration analyst for condition monitoring.

Responsible for liaising with customer representatives on completion designs, hydrostatic calculations & tubing movement simulations (Cyberstring/WellCat), work planning, and procedures.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 [ 115 ] 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out