Resume - I have graduated in Electrical Engineering from a reputed institution in North I...

Misco Jobs

Resume #2911

CONTACT INFORMATION:
View contact information...

Date of Birth: 31. 05.1970

Marital Status: Married

Qualification: B.E.Electrical
Year of Passin: 1991

University/ Colleg: Allahabad university, MNREC

Additional Qualification: PG Diploma in Operational Management.

Religion: Christian

Languages Known: English, Hindi, Malayalam

Years of Experience: 12 Years

Present Employment:

Company: Owens Corning India Ltd.

Designation: Manager, Electrical & utilities

Date of Joining: 15 July 1997

Nature of Present Job:

Owens corning India Limited is a fully automated 30,000/- TPA glass fiber manufacturing unit. I have been employed with this company since the project start up.

During the design and execution of the project I had the opportunity to work in association with the Engineers from Owens corning USA and Tata Consulting Engineers (Project Consultants) as Project Manager, Electrical. This gained me acquaintance with the systems of ABB, Siemens, Allen Bradley, &Foxboro.

Presently I am holding independent responsibility of the operation and maintenance of the entire Electrical and Control system, leading a group of Engineers to execute Preventive, Predictive, Corrective and Breakdown maintenance activities in the plant. I am responsible for the spares, and inventory control also.

I am also responsible for the operation and maintenance of all the Utilities systems required for the plant. Centrifugal Chillers ( 1800 TR) for the air conditioning, Air- Compresors, DM water plant, Boiler House, Water supply, Fuel ( Propane, LSHS & LDO )

Additional to the above I am responsible for the efficient energy management. I have Implemented several energy saving projects, with saving so far above Rs.100,00,000/- in 5 years.

The major projects were optimization of Chiller performance, Air compressor usage optimization, Energy saving using Variable frequency drives, Power factor improvement, and efficient utilization of Electrical energy by monitoring and controlling the usage of Energy.

Areas of Experience

1. Erection & Commissioning, Operation & Maintenance

* 220KV substation consisting of two 20 MVA 220/11kv transformer with on load tap changer, SF6 circuit breaker, Control and relay system.
* Indoor Siemens make Unitized substations of 5MVA each- 3 nos, with air circuit breakers and 7 MVA –1 no, with vacuum circuit breakers.
* Testing and commissioning of Load break switches.
* Allen Bradley make Motor control centers, PLC & SLC.
* Allen Bradley & Yaskawa make AC variable frequency drives
* Reliance Electric make AC /DC motors & DC drives.
* Rubicon make thyristorised Electric Boost system for the furnace heating.
* Foxboro DCS and control Systems.
* 1000 KVA Emergency DG set with auto starting
* 20 KVA & 5 KVA ups systems for the DCS and field controls.
* Siemens Simovert Drive – Soft Starter
* Testing of protective Relays and relay co-ordination & interlock checking.
* Integration of alarms to the main control room.
*

2. Managerial Experience

* Involved in the recruitment of the entire maintenance team.
* Worked as a team leader in preparation of ISO 9002, ISO 14001, OHSAS 18001 certification
* Liaisoning with state Electricity Board engineers, & Electrical Inspector.
* Day today energy management and energy conservation.
* Planning of Preventive maintenance activities with the help of maintenance software.
* Planning corrective maintenance based on breakdown analysis, Root cause analysis.
* Planning of predictive maintenance activities with the help of CSI equipments and software.
* Planning and execution of Annual shutdown activities.
* Spare part management and spare cost control.

Previous Experience:

Company Designation Duration

Herdillia Unimers Asst, Manager 2 years
Cipla Ltd Officer 2 years
Jaypee Cements Engineer 2 years

Additional Experience

* Operation and maintenance of motors up to 5000Hp.
* Operation and maintenance of DC motor drives, Electrostatic precipitators, Slip power recovery system Etc.
* Flame proof motors.
* ABB make 6.6 KV Switchgear.
* GEC, L&T, Crompton, &Jyothi make LT and HT switchgear.
* XLPE and armoured cable testing & repairing using jointing kits.
* Lighting design and maintenance
* Air conditioners and HVAC maintenance.
* Air compressors and Chillers maintenance.
* Battery operated pallet trucks and Floor keepers maintenance.
* Maintenance of elevator and motorized rolling shutters

Computer Knowledge,

1. Windows, MS office, Excel, Word, E-mail.

2. Unix and C programming.

3. Undergone training from Allen Bradley for AC Drives, PLC-5 and SLC 500

4. Undergone Training on Foxboro DCS.

Present Salary: Rs. 6,00,000/- Per Annum

Training:

Communication & Presentation skills ( sabira merchant)
Finance for non-finance people ( prof. Jhakotia)
Leadership training- by Dr.jairam shetty
Team Building – By Jayshankar

Plc, slc &drives by allen bradley
System configuration from foxboro chennai
Ergonomics, stress management, hazop study, first aid, safety.

How to use word, excel and power point effectively
Life style management by Dr.nadkarni
Six sigma white belt training

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 10751 to 10800 of 15325)

Go to Search Parameters...

Brief Description

Class 6 Underground Coal Miner. Certified Welder. Certified structural steel welder. Skilled in rebuilding all types of machinery. Skilled in running all types of equipment.

instrument engineer with 6 yrs of experiencer in construction management,projects and commisioning in instrumentation field.

Six Sigma green belt in manufacturing sector having 6 years of experience,B.E. in electrical and eectronics engineering

Qualified MLWD engineer with mechanical eng. background

Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe

Primavera Scheduler

Has 15 years of top, diversified logistics/operations management experience.

Facilities supervisor for utilities, electrical disturbution, ammonia refrigeration, power boilers and heat exchangers,production equipment, infrastructure, mechanical contractor for twenty years,

Over thirty years engineering, construction, remediation, operations, start-up, and manufacturing experience includes: project management; project planning, sched¬uling and analysis; cost engineering; cost, schedule, and earned value analysis and reporting; WBS, OBS development; EAC, SPSPI and CPI

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Kimberlite Geologist / Angola / Portuguese speaking / 6 years experience / Planning, implementation and supervision of exploration activities.

Mechanical Engineer, 2 yrs of experience in design and development, cad packages- CATIA V5, solidworks 2006

I am graduae chemical engineer and have a 3 years experience as a process engineer. Currently I am doing my international post graduate degree in petroleum engineering in Technical university of Denmark.

Graduated as petroleum engineer, worked as plant treatment operator, reservoir engineer, production engineer specialist and production engineer

15 years of dragline experience

Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.

QA/QC Manager, Vendor Surveillance, Inspection Supervisor, Construction Supervisor

Field engineer with customer focused and team motivated success in operations conducted for local and international clients both on land and offshore installations

An ambitious, highly motivated and energetic civil engineer with extensive commercial experience in construction business. Superb managerial, communication skills combined with analytic and practical personality. Looking for project coordinator, contract administrative or similar position.

Experienced in fast paced environments. Recognized for exceptional problem solving and motivational skills. Hold high standards and believe that profitability, customer service and quality work are primary factors of success in any competitive industry.

Seek a challenging position, where performance is rewarded with new responsibilities to build up my career ahead.

Qualification - M.Tech in Applied Geophysics B.Sc. in Electronics

Graduated from the University of Zambia in 1996 with a bachelor's degree in Metallurgy & Mineral Processing. Six years experience in the mining industry. Worked as a Production Operator for 1 year 4 months, 7 months as a Production Foreman. Worked as a Metallurgist for 4 years.

instrument and control engineer working in oil/gas/petrochemical projects for more 4-5 years in big consulting engineering company in Iran. Bsc in electrical eng.-control

as below

To obtain full time employment with a Prominent company in the Construction Industry that offers stability, growth, and advancement opportunities where I can utilize my skills as a Heavy Equipment Operator.

Am a post graduate degree holder in the field of hospital administration, with 3 years of working exp. in a multi speciality hospital in south kerala, seeking for suitable post in the same field.

D.A.E Electrical I have 12 years of work experience in post of electric technician in Oil & Gas Company.

For the post of Design and draughting

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

• Integral Productivity Engineer • Oil Well Optimization • Reservoir Management • Oil well maintenance (wireline, coiled tubing, fractures, gravel pack, chemical cleaning, snubbing). • Water Conformance

My technical and professional skills consist of: professional sales, customer contact management and networking. Dedicated, creative problem solver that is a team player and also very comfortable as a stand-alone contributor.

I have expertise in mechanical/petroleum industry

Recent graduate of McGill University, Montreal Quebec Canada. Relevant field and research experience in the Canadian Rocky Mountains with structure sections, digital mapping, and air photo interpretation. Field experience with DeBeers Canada helicopter sampling.

Six years of experience in Project Management, Contract Management, Quality Control and site supervision of high-rise residential and commercial project. About four year of experience in Project Management of an industrial projects.

Project & Design Engineer

Objective: To contribute my technical skills and to be part of professionally managed Organization that provides excellent opportunities for learning and scope for Individual development.

Vast Experience in Business Development, Administration and Management, Business correspondence.

I have graduated in Electrical Engineering from a reputed institution in North India(MNREC, Allahabad) and have 12 years of experience in maintenance and handling of engineering projects. I am familiar with Electrical systems , Utility operation and Maintenance.

I recently graduated from the University of Minnesota with a B.S. in Geology. I have little experience, but I did work as a research assistant for a professor, Dr. Christian Tessier and have done six weeks of field work.

Engineer with fourteen years of experience in the oil industry, specifically in The Venezuelan Oil industry, where he has worked in different positions into the Drilling Management.

Mechanical Engineer with more than 5 years of experience in multidisciplinary projects specialized in Intergraph PDS 3D and SmartPlant P&ID

Architect and Environmental Planner Total Job Experience-2.5 yrs as an Architect 2 Months as a Planner

QA/QC Engineer & Welding Inspector

Have a part of the team surveying site routing and Designing the flow of Gas (Pipe Natural Gas) pressure in M.P. (Medium Pressure) or main in L.P. (Low Pressure) Gas Pipe Line (PE Pipe) using software Pegasus.

Bilingual engineer with experience in engineering and teaching. Experience in administration, group management. Dynamic and outgoing by nature.

A qualified chemical/environmental engineer looking for a challenging position in the field environmental reporting, pollution control or alternative energy.

Looking for work opportunities preferably in the area of Completions database administration/Punchlist/Handover. Work experience of over 10 years with 5 years in the Oil and Gas commissioning sector. My skills are multi-tasked mostly in project documentation and completions database administraton.

MSc in Environmental Engineering from University of Nottingham, UK

Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.

First Prev 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 [ 216 ] 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out