Resume - A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engi...

Misco Jobs

Resume #29679

CONTACT INFORMATION:
View contact information...

EDUCATION:
1968 Degree – Marine Engineer, (Ship Engineer)
1967 Federal Diploma: Marine Engineer, (Ship Engineer) - Theoretical
1966 Training College for Marine Engineer, (Ship Engineer)
College Diploma

1962 Diploma of Electrical Instrument Maker

STRENGTHS:
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects, who is hard working, industrious and motivated by achievement and can be relied on to "get the job done".
- Extensive experience in project pre-commissioning, commissioning and start-up of major projects.
- Extensive experience HSE audits and inspections, Safety meetings with Subordinates and Contractors.
- Start-up co-ordination during plant modification, turnarounds and shutdowns
- Extensive experience as Shut-Down planner.
- Skilled production and process trouble shooter, capable of conceiving realistic and practical solutions maximising cost effectiveness
- Extensive management and supervisory skills experience with good man-management skills including employee training, safety training and management.
- Competent in document and procedure writing skills with extensive technical contact interviewing, section and recruitment skills.
Employment Summary:
- 35 years pre-commissioning, commissioning, start-up, operating in oil and gas petrochemical and metallurgical plants.
- 21 years project commissioning, start-up and operating in oil and gas and petrochemical plants.
- 14 years project commissioning, start-up and operating in metallurgical plants

EXPERIENCE SUMMARY:
- Gas treatment plants, Atmos crude oil distillation, vacuum distillation, platformers, naphtha & distillate hydrotreaters, tankfarm operation & blending, naphtha cracking, gasscubbers, degasifiers-CO2 removal plants, visbreakers, sulphur/amine plants, merox plants, naphtha rerun units, H P reaction vessels.
- Pressure testing, line blowing, line flushing, steamblowing, pitting testing, punchlisting of process lines.
- Steam generators, Water tube boilers, flame tube boilers, demin water plants.
- Waste heat boilers.
- Waste water treatment plants = Tanks, Horizontal/inclined screw conveyers (Classifiers), Sludge/mudpumps, cyclones, mixers dosing pumps.
- Boilerfeed water treatment plants.
- Closed Cooling system = Overhead air fin cooler with variable speed fans and fixed speed overhead air fin cooler with louvre airflow control.
- Steam turbines, gas turbines, gas compressors, air compressors, air dryers, positive displacement pumps, centrifugal pumps, submergible pumps, diesel pumps and generators, multistage pumps, screw conveyers, skimmers, airrators.
- Cryogenic storage, propethane reactors, catalyst preparations, catalyst blending
- Furnaces, incinerators, ground flares, including dry out and bake out.
- Flocculant blending, hydraulic systems, positive slurry displacement pumps.
- Utilities/offsite: Instrument air compressors and dryers, waste water treatment,
H2 – N2- O2 systems, Firewater systems, Potable water, Sandfilters, Safety shower systems, Steamline blowing (pitting test)

EMPLOYMENT HISTORY:
March 2005 - July 2005 TOTAL OIL Refinery
Antwerp BELGIUM
Commissioning-Co-Ordinator/Engineer Supervisor and Shut-Down planner.

April 1988 - July 2003 W A Refinery
Collie WA
Commissioning-Co-Ordinator/Operations Supervisor and Shut-Down planner.

May 1980 - March 1988 Total Oil Refinery
Sydney, Australia
Off-Side & Production Supervisor

May 1979 - May 1980 ICI Australia
Sydney, Australia
Commissioning Co-Ordinator/Control Room Operator

July 1973 - April 1979 Total Oil Refinery
Flushing, (Vlissingen) The Netherlands
Commissioning Engineer/ Production Supervisor

August 1969 - March 1973 Gulf Oil Refinery
Rotterdam, The Netherlands
Senior Process Technician

January 1967 - July 1969 V.N.G. Shipping Lines
Rotterdam, The Netherlands
Assistant Engineer and 5th Engineer

ADDITIONAL QUALIFICATIONS:

Issued By: Qualificate Achieved:
- St John Ambulance First Aid Certificate
- Rotterdam Fire Brigade Fire Fighting and B.A. Certificate
- Department of Labour and Industry - New South Wales Power Hoist Drive
- W A - Computer Centre Document Development
- W A- Computer Centre MS Windows NT
- W A- Computer Centre SAP Management including:
- Payroll Functions
- Risk Event Reporting
- Shut Down Planning
- Material Management
- Contract Management
- Business Event Menu Usage
- PM Material and Service
- Honeywell Honeywell TDC 2000,3000, 4500
- I.T.C. Work Place Assessor
- Management Technology Education - Perth Management Skills for Supervisors and Managers
- W A- HR Equal Opportunity, Bullying, Harassment and Discrimination in the Workplace
- Development-Dimension International Working Through Conflict
- Development-Dimension International Communicating with Others
- W A - Training Centre Atmosphere Testing – Gas Testing
- 3CM Pty Ltd People Development Workplace Trainer and Workplace Assessor

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2851 to 2900 of 15341)

Go to Search Parameters...

Brief Description

34 years in oil industry, toolpush and wellsite supervisor

Civil and Structure AutoCAD Draughtman with 17 years experiance

I have more than 10 years of maintenance experience as an instrument technician

Adaptable, Senior Procurement specialist with international experience in Europe, Middle East and the FSU, with EPC’s, operators and service companies. A buyer, with experience of procurement procedures, expediting, inspections, shipping (incoterms) & customs. Knowledge of sulphuric acid plant procu

Metallurgical engineer, Technical consultant, multi-task,

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

OBJECTIVE: To be a Resident Engineer or a Project Manager.

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Planning, Scheduling, Cost Control

Oil and gas economics manager

Cement Production Supervisor // Senior Cement Process Engineer //

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

Mechanical engineer having a vast experience in general management for the vehicles fleet management, construction equipments, ground equipments with the most succesful profit and loss bases.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Materials, Warehouse, Asset, Logistics Management

Iam seeks job for Procurement / Material coorninator

Power Plant Erection/Maintenance /Warranty Engineer

Field Engineer

dcs panel operation for terminal and plant

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

I'm having good knoweldge of Land Survey work and having sound knowelge of Microsoft Excel which is very much useful in estimation works

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

Geotechnical Engineer & Ph. D in Civil Engineering with 15 years experience work as University Researcher and Mainly as Freelance Expert-Consultant.

Sales and marketing Experiences.

Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.

Environmental Engineer with Background in Hydrogeology and Geology

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

Civil Engineer

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Safety Engineer/Professional

Senior Structural CAD Designer (direct & contract assignments)

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

I'm currently working at Doha, Qatar as a document controller for construction company.

QS experienced within building and civils, 31yo, 10yrs experience.

Seeking Environmental Health and Safety position

BBA Construction Management - Project Controls Specialist

I am currently working with Australian Multinational Gold Exploration Company as a Geologist with Indo Gold Mines Pvt. Ltd., Bangalore. Our Exploration target is Gold Prospect in Rajasthan, India involved with grassroots Gold Exploration. Working within a small team has allowed me exposure.

Quality control manager - BE Metallurgy - Looking after all quality complaints, Metallurgical testing

First Prev 51 52 53 54 55 56 57 [ 58 ] 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out