Resume - Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Ge...

Misco Jobs

Resume #3098

CONTACT INFORMATION:
View contact information...

Bsc. Geology 1991.

Software Usage

Proficient in Landmark Software. Seisworks and Openworks, Zmap-Plus, Earthcube, Stratworks and SDI-Montage. Consistent and good use of Power Point, Ms Word, Excel. Intermediate usage: Magic Earth, Stratimagic, Voxel Geo and Petrel. Excellent self-tutor of any new interpretation software. Can get to speed in 3 weeks.

Responsibilities

Conoco Inc (ConocoPhillips)

Geologist OPL 220 evaluation- Chota Appraisal. Location-Houston March 2003-Date

Upon conclusion of all the necessary interpretation necessary for making a decision on OPL 220 it was mandatory to prepare a summary of work done as part of the companies best practices policies. Responsibilities:

- Prospect revaluation and documentation.
- Preparation of Oil Mining Lease Application.
- Montages.
- Presentations to peers on lessons learnt.

Geologist Pulolulu Prospect Evaluation OPL 220. Location-HoustonJan 2003- March 2003

Perhaps the oldest recognizable toe thrust structure in the southern delta (movement 15-9.0Ma). I was charged with the responsibility of determining the value of this prospect to the partnership.

- Determining primary and secondary reservoir targets.
- Structural mapping and interpretation. Explaining the trapping echanism.
- Worked with a multi-disciplined group in predicting thickness, reservoir extent, pore pressure, poro-perms and seal.
- Provided all the necessary inputs for the volumetric and economic calculations.
- Presented results to peers, management and partners.
- Prepared all the brochures for the Technical and Management Committee
Meetings with Government Partners

Geologist Chota Discovery Nigeria, (Appraisal Well Planning). Location- Houston June2002-Dec 2002

After the successful Chota-1 well in 1998 and Bolia appraisal well in 2001, work commenced on updating the initial Chota interpretation with new well information using a new reprocessed 3D data set. My responsibilities included.

- Horizon and fault re-interpretation
- Worked with a multi-disciplined team in determining a range of potential outcomes for each of the identified targets; phase, net sand, thickness and poro-perms.
- Determining the optimum appraisal location that would address and reduce the risks identified.
- Provided Power Point presentations to update Partners and Management at
Technical meetings.
- Contributed to the teams decision on the most likely model to use.
- Updated maps with new Appraisal well information and determined potential reserves.
- Presented at peer review meetings to review interpretations before presenting to management.
- Prepared all the brochures for the Technical and Management Committee
Meetings with Government Partners

Geologist Corocoro Appraisal Venezuela, Houston -Jan 2002-April 2002

Corocoro appraisal project is located in the Gulf of Paria of the coast of Venezuela. Duties included providing the following Reservoir Parameter Maps for the various reservoirs.

- Building a Stratigraphic Column (Using Strat Column Editor-Stratworks)
- Gross True Stratigraphic Thickness Maps
- Gross True Vertical Thickness Maps(Calculated from TST maps and dips from structure maps)
- Net to Gross Maps
- Average Effective Porosity Maps
- Average Sw Maps
- Average Perm Maps

The combination of parameter maps was the basis for accurate STOOIP calculations and reservoir simulations.

Geophysicist OPL 220 Deepwater Nigeria, Houston -2001-2002

Led and coordinated the interpretation of another shale cored anticline (Ebipre Prospect) on OPL 220. Responsibilities include:

- Extending horizon picks from Chota to Ebipre
- Monitoring the ongoing 3D reprocessing program over the Ebipre prospect.
- Determining amplitude expectations and what they should indicate at various depths (Gas/Oil/HC/N/A)
- Preparation of amplitude maps and predicting thickness by calibrating amplitude to well penetrations at Chota.
- Worked with a multidiscipline team to predict Trapping/ Containment, Seal,
Source, Migration and Fluid Phase.
- Determining potential reserves and risks associated with the prospect.
- Worked closely with the Reservoir Engineering group in determining the economics and value of this Prospect.
- Prepared all the brochures for the Technical and Management Committee
Meetings with Government Partners

Geologist Integrated Interpretation Center, Houston -1999- 2001

Worked on the POST well interpretation of the Chota Discovery on OPL 220 Nigeria (Chota reservoir architecture: Amalgamated channel sands on the flanks and crest of a collapsed crest shale cored anticline. Our interpretation goal was to determine connectivity, reservoir architecture, extent, thickness, fluid phase and potential appraisal locations. My responsibilities included:

- Horizon mapping (Structure, Isopach Maps and Amplitude Maps), Extending
Interpretation into neighbouring acreages.
- Amplitude Calibration to well data
- Reservoir prediction using Logs, Seismic and Amplitude Maps
- Using Earthcube displays in determining future appraisal well locations.
- Worked with a multi-disciplined team on reservoir characterization.
- Prepared all the brochures for the Technical and Management Committee
Meetings with Government Partners

Conoco Energy Nigeria Limited

Business Development and
Portfolio Management Officer Location- Lagos 1997-1999

- Coordinated Technical and Management Committee Meetings.
- Contributed to the process of negotiating for better fiscal incentives.
- Monitored new developments in acreage and lease positions in the Niger delta.
- Participated in technical and commercial evaluation of new venture opportunities (OPL 91)
- Farm in evaluations. Visited two data rooms.
- Maintained good and effective working relationship with the indigenous partners.
- Developed a superior understanding of the organizational hierarchy of
Government organizations
- Understood the Government requirements that would affect our day to day operations, developed negotiating techniques suitable for the Nigerian environment while respecting FCPA requirements.
- Provided valuable opinions that helped to shape operations specifically to satisfy the host Government.

Ukpokiti Marginal Field Development. Location –Lagos. 1994-1997

Shore Based Geologist duties
- Provided Geological information for drilling permits and presentations to Government and Partners.
- Pre spud meeting preparations (Making sure all parties are present to agree, award & sign contracts).
- Preparation of morning reports & weekly activity reports.
- Zone Identification and comparison against prognosis while drilling.
- Time depth calculations during drilling.
- Log correlation's between wells.
- Determination of reservoir properties from logs (sand thickness, shale base line, contacts, reservoir fluid content, permeability and porosity's, etc).
- Updated models and maps based on new well information.
- Assisted in the preparation of Final Well Reports.
- Technical presentations and updates to Management, Partners and
Government
- Developed a data distribution/communication and archiving network.
- Procured permits and obtained clearances from the Government during the
Drilling, Engineering, Fabrication and Commissioning of the
FPSO "Independence"
- Participated in Industry Meetings like the Nigerian Association of
Exploration Explorationist and Deepwater Operators Group Meeting. Hosted the Deepwater Operators Group Meeting six times

Mobil Producing Nigeria Limited 1991-1994

Shore based Trainee Geologist, Production Geology Department:
- Provided morning reports, daily offshore activities summary, and weekly activities reports for Government and Partners.
- Responsible for splicing together all new log information faxed in daily and digitizing them into the database. Correlating wireline logs with 2D
seismic data from the Oso development project.
- Zone identification on logs, comparison against prognosis and preparing geological summary reports
- Worked with contractors to ensure that all parties were on board and up to date with operational needs.

Qua Iboe Terminal for Six Months.
-Responsible for sample description, preservation and archiving.

Technical Presentations at Conferences

"Space and the final frontier" The creation of accommodation space in the Deepwater Niger Delta. Presented by Bemigho Okome and Roy Fitzssomons at the Nigerian Association of Petroleum Exploration annual conference, November 1999.

Awards

CONOCO NIGERIAN BUSINESS UNIT. SPECIAL THANKS AWARDS

* For all your help with the arrangement for the Ukpokiti team visit - Alok Jain

* For all your hard work and exceptional effort in establishing
Excellent relations with our Partners and in support of the
OPL 220 Exploration efforts
-Robert Kunemond

* For dedication and perseverance in obtaining Government approvals
On the assignment of interest from Conoco to Esso on OPL 220
-Raymond Marchand

* For dedication and perseverance in procuring all necessary permits and approvals resulting in an on time start of the OPL 220 3D survey -Kathy McGill

* For your outstanding efforts in supporting the technical success, creation and development of the Ukpokiti Marginal field. -Pat Oenbring

* Most effective employee at Conoco Energy Nigeria limited 96 & 97 -Raymond Marchand

INTERGRATED INTERPRETATION CENTER SPECIAL THANKS AWARDS

* In appreciation of all your work at the NAPE conference in Lagos.
Your technical presentation was well received and your work on the exhibition stand ensured that Conoco was represented accurately and professionally. Thanks for a job well done.
- Steve Solomon

* For your support and coordination of activities in the Nigerian
Strategy simulation. This exercise provided valuable insights into the dynamics of the competition for exploration block in the upcoming Nigeria bid round.
-Steve Solomon

* For supporting the OPL 220 NAPIMS Special Studies Program
- Wendy King

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 15497)

Go to Search Parameters...

Brief Description

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

Junior Environmental Engineer

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

EH&S Manager with more than 12 years experience with chemical, radioactive and hazardous materials in manufacturing environment.

Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

A highly motivated person willing to work my way forward. experienced and eager to learn, most of all I am willing to learn.

OBJECTIVE: A position as an Environmental, Health and Safety Manager.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Graduate Civil Engineer working as Senior Quantity Surveyor with over 13 years of experience in construction industry ranging from Bridges, Highways and Building structures. I have also been designated as a Certified Cost Engineer by the AACEI in October 2008. Well versed with FIDIC, CESSM3 & POMI

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

Combined experience in design and construction

Core Logging, Bore Hole Logging, Rock Identification, Reserve Estimation & Calculation, Liasioning With Govt.

HND Architecture, PGD Architecture, MBA

Security Manager. Coordinator. Instructor

Graduated in computer science subject

Experience in Engineering, Exploration and Environmental Geology. Advanced First aider, Defensive driving and Incident Manager. Well adapted to site safety with skills to implement site safety

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

Tangible experience in crushing, screening, HMS, dewatering, coke making and Gas cleaning. I am a holder of a brilliant BSc (Hons) Degree in Metallurgical Engineering. Being a good communicator, I am a very dynamic, self motivated and analytic team player who is result oriented.

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

Environmental geology on 2009.I am seeking for a volunteering job in geology immediately as i have enough free time.I

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

DIPLOMA IN MECHATRONICS Engineer

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

I have done my Diploma in Mechanical Engineering.I have experience is more than one domain in the Engineering,such as Production supervisor,Production Technician and drafter as well.

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

IT Manager

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out